2 layers111 × 96.5 mm
2 layers111 × 96.5 mm
ErgoDOX
regack/depot11Stuff
- Size
- 111 × 96.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 184
- Nets
- 83
- Pads
- 591
- Tracks, vias
- 0, 0
- Pours
- 2
- Routed
- Not yet
- KiCad
- KiCad 3
- Created
- 18 Jan 2014
- Updated
- 19 Feb 2014
Overview
ErgoDOX is an open-source printed circuit board by regack, from the regack/depot repository on GitHub. It is a 2-layer board of 111 × 96.5 mm with 184 parts on 83 nets.
It is built around the ATMEGA32U2-AU, MCP23018-E/SP and JUMPER3. Its parts include 50 inductors, 29 diodes, 24 switches, 11 connectors and 10 capacitors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3
ATMEGA32U2-AU
TQFP-32(7x7)-40℃~+85℃ 16MHz 1KB 1KB 2.7V~5.5V 22 32KB 8 Bit AVR Built-in FLASH Power-on reset (POR)、Undervoltage detection (BOR/LVD/LVR/LVI)、Watchdog reset、External pin reset (NRST)、Built-in general-purpose timer、Programmable watchdog TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontroller Units (MCUs/MPUs/SOCs)
MCP23018-E/SP
SPDIP-28-40℃~+125℃ 1.8V~5.5V 3.4MHz I2C Interrupt Output SPDIP-28 I/O Expanders ROHSMicrochip TechnologyI/O ExpandersJUMPER3
HDR-TH_3P-P2.54-L7.6-W2.5HDR-TH-3P-2.54mm New Arrivals ROHSWürth ElektronikUncategorised
README
README.mddepot
Stuff
Parts
184| Qty | Value | Footprint | References |
|---|---|---|---|
| 34 | DRILL | Pad_Drl | M1, M2, M10, M11, M12, M13, M14, M15, M16, M17, M18, M19, M20, M21, M22, M23 +18 |
| 29 | LED | MX_LED | L1:0, L1:1, L1:2, L1:3, L1:4, L2:0, L2:1, L2:2, L2:3, L2:4, L2:5, L3:0, L3:1, L3:2, L3:3, L3:4 +13 |
| 21 | LED | LED0805_(1-2)_2Side | L1, L2, L3, L4, L10, L10.1, L11, L11.1, L12, L12.1, L13, L14, L15, L16, L17, L18 +5 |
| 6 | JUMPER3 | 40milX3 | JP1, JP2, JP3, JP4, JP5, JP6 |
| 4 | 100n | SM0805 | C2, C3, C4, C5 |
| 2 | 1u | SM0805 | C1, C8 |
| 2 | 2.2kΩ | SM0805 | R1, R2 |
| 2 | 22 | SM0805 | R5, R6 |
| 2 | 22p | SM0805 | C6, C7 |
| 2 | LEFT(TOP) | USB_MICRO-B_MOLEX_47346-0001 | J2.1, J2.1.1 |
| 2 | RIGHT(BOTTOM) | USB_MICRO-B_MOLEX_47346-0001 | J2.2, J2.2.1 |
| 2 | USB | USB_MINI-B_OST_M26FTR | J1, J1.1 |
| 1 | 0.1μF | SM0805 | C10 |
| 1 | 10k | SM0805 | R3 |
| 1 | 10μF | SM0805 | C9 |
| 1 | 22.6k | SM0805 | R4 |
| 1 | ASX3F | ASX3F | X1 |
| 1 | ATMEGA32U2 | adafruit-TQFP32-08 | IC1 |
| 1 | D1:0 | SOD-123_2Side | D1:13 |
| 1 | D1:1 | SOD-123_2Side | D1:12 |
| 1 | D1:2 | SOD-123_2Side | D1:11 |
| 1 | D1:3 | SOD-123_2Side | D1:10 |
| 1 | D1:4 | SOD-123_2Side | D1:9 |
| 1 | D2:0 | SOD-123_2Side | D2:13 |
| 1 | D2:1 | SOD-123_2Side | D2:12 |
| 1 | D2:2 | SOD-123_2Side | D2:11 |
| 1 | D2:3 | SOD-123_2Side | D2:10 |
| 1 | D2:4 | SOD-123_2Side | D2:9 |
| 1 | D2:5 | SOD-123_2Side | D2:8 |
| 1 | D3:0 | SOD-123_2Side | D3:13 |
| 1 | D3:1 | SOD-123_2Side | D3:12 |
| 1 | D3:2 | SOD-123_2Side | D3:11 |
| 1 | D3:3 | SOD-123_2Side | D3:10 |
| 1 | D3:4 | SOD-123_2Side | D3:9 |
| 1 | D3:5 | SOD-123_2Side | D3:8 |
| 1 | D4:0 | SOD-123_2Side | D4:13 |
| 1 | D4:1 | SOD-123_2Side | D4:12 |
| 1 | D4:2 | SOD-123_2Side | D4:11 |
| 1 | D4:3 | SOD-123_2Side | D4:10 |
| 1 | D4:4 | SOD-123_2Side | D4:9 |
| 1 | D4:5 | SOD-123_2Side | D4:8 |
| 1 | D5:0 | SOD-123_2Side | D5:13 |
| 1 | D5:1 | SOD-123_2Side | D5:12 |
| 1 | D5:2 | SOD-123_2Side | D5:11 |
| 1 | D5:3 | SOD-123_2Side | D5:10 |
| 1 | D5:4 | SOD-123_2Side | D5:9 |
| 1 | D5:5 | SOD-123_2Side | D5:8 |
| 1 | DTSM-6 | ADTSJW65RV | S0 |
| 1 | GND | Pad | P8 |
| 1 | LEDa | SM0805 | RA1 |
| 1 | LEDb | SM0805 | RB1 |
| 1 | LEDc | SM0805 | RC1 |
| 1 | MCP23018 | adafruit-SSOP24 | U2 |
| 1 | MISO | Pad | P1 |
| 1 | MOSI | Pad | P6 |
| 1 | RES | Pad | P7 |
| 1 | SCK | Pad | P5 |
| 1 | STAB200 | STAB_PCB940 | S2 |
| 1 | SW1:0 | MX_FLIP | SW1:13 |
| 1 | SW1:1 | MX_FLIP | SW1:12 |
| 1 | SW1:2 | MX_FLIP | SW1:11 |
| 1 | SW1:3 | MX_FLIP | SW1:10 |
| 1 | SW1:4 | MX_FLIP | SW1:9 |
| 1 | SW2:0 | MX_FLIP | SW2:13 |
| 1 | SW2:1 | MX_FLIP | SW2:12 |
| 1 | SW2:2 | MX_FLIP | SW2:11 |
| 1 | SW2:3 | MX_FLIP | SW2:10 |
| 1 | SW2:4 | MX_FLIP | SW2:9 |
| 1 | SW2:5 | MX_FLIP | SW2:8 |
| 1 | SW3:0 | MX_FLIP | SW3:13 |
| 1 | SW3:1 | MX_FLIP | SW3:12 |
| 1 | SW3:2 | MX_FLIP | SW3:11 |
| 1 | SW3:3 | MX_FLIP | SW3:10 |
| 1 | SW3:4 | MX_FLIP | SW3:9 |
| 1 | SW3:5 | MX_FLIP | SW3:8 |
| 1 | SW4:0 | MX_FLIP | SW4:13 |
| 1 | SW4:1 | MX_FLIP | SW4:12 |
| 1 | SW4:2 | MX_FLIP | SW4:11 |
| 1 | SW4:3 | MX_FLIP | SW4:10 |
| 1 | SW4:4 | MX_FLIP | SW4:9 |
The 176 most common of 184 parts.
Questions
How big is the ErgoDOX PCB?
It measures 111 × 96.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ErgoDOX use?
184 parts, built around the ATMEGA32U2-AU, MCP23018-E/SP and JUMPER3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ErgoDOX KiCad files?
From the regack/depot repository on GitHub, at the commit this page was made from: the board is ergot/ErgoT.20.1/ErgoDOX.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ErgoDOX design in my own project?
Its repository states no licence, so its author keeps all rights: ask regack before reusing the design.
More from regack/depot
3- 2 layers55.9 × 59.7 mm
- 2 layers36.8 × 18.3 mm
Similar boards
- 4 layers117.7 × 100.9 mm
Shield
adamgreen/rugrover
A Work In Progress: My modern interpretation of the Rug Warrior Pro
46 parts1 - 4 layers225 × 111.5 mm
- 2 layers426.4 × 498.2 mm
Rotonometron v1
Zoestra/Rotonometron
Split Keyboard PCB with all the bells and whistles
294 partsGPL-3.0 - 2 layers299.5 × 105.8 mm
- 2 layers168 × 109.2 mm
- 2 layers194.3 × 79 mm
- 2 layers57.2 × 38.9 mm
Cookpad pad
cookpad/cookpad-pad
Cookpad Pad — A six keys macro pad made by Cookpad.
32 parts76Apache-2.0 - 2 layers120.1 × 52.3 mm
