2 layers111 × 96.5 mm
2 layers111 × 96.5 mm
ErgoDOX
regack/depot11Stuff
- Size
- 111 × 96.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 129
- Nets
- 59
- Pads
- 487
- Tracks, vias
- 1,088, 61
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 18 Jan 2014
- Updated
- 19 Feb 2014
Overview
ErgoDOX is an open-source printed circuit board by regack, from the regack/depot repository on GitHub. It is a 2-layer board of 111 × 96.5 mm with 129 parts on 59 nets, routed with 1,088 tracks and 61 vias.
It is built around the ATMEGA32U4. Its parts include 29 diodes, 27 switches, 11 connectors, 8 capacitors and 6 resistors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mddepot
Stuff
Parts
129| Qty | Value | Footprint | References |
|---|---|---|---|
| 34 | DRILL | Pad_Drl | M1, M2, M10, M11, M12, M13, M14, M15, M16, M17, M18, M19, M20, M21, M22, M23 +18 |
| 4 | 100n | SM0805 | C2, C3, C4, C5 |
| 2 | 10k | SM0805 | R3, R7 |
| 2 | 1u | SM0805 | C1, C8 |
| 2 | 2.2kΩ | SM0805 | R1, R2 |
| 2 | 22 | SM0805 | R5, R6 |
| 2 | 22p | SM0805 | C6, C7 |
| 2 | LEFT(TOP) | USB_MICRO-B_MOLEX_47346-0001 | J2.1, J2.1.1 |
| 2 | RIGHT(BOTTOM) | USB_MICRO-B_MOLEX_47346-0001 | J2.2, J2.2.1 |
| 2 | USB | USB_MINI-B_OST_M26FTR | J1, J1.1 |
| 1 | ASX3F | ASX3F | X1 |
| 1 | ATMEGA32U4 | TQFP44 | IC1 |
| 1 | D1:0 | SOD-123_2Side | D1:13 |
| 1 | D1:1 | SOD-123_2Side | D1:12 |
| 1 | D1:2 | SOD-123_2Side | D1:11 |
| 1 | D1:3 | SOD-123_2Side | D1:10 |
| 1 | D1:4 | SOD-123_2Side | D1:9 |
| 1 | D2:0 | SOD-123_2Side | D2:13 |
| 1 | D2:1 | SOD-123_2Side | D2:12 |
| 1 | D2:2 | SOD-123_2Side | D2:11 |
| 1 | D2:3 | SOD-123_2Side | D2:10 |
| 1 | D2:4 | SOD-123_2Side | D2:9 |
| 1 | D2:5 | SOD-123_2Side | D2:8 |
| 1 | D3:0 | SOD-123_2Side | D3:13 |
| 1 | D3:1 | SOD-123_2Side | D3:12 |
| 1 | D3:2 | SOD-123_2Side | D3:11 |
| 1 | D3:3 | SOD-123_2Side | D3:10 |
| 1 | D3:4 | SOD-123_2Side | D3:9 |
| 1 | D3:5 | SOD-123_2Side | D3:8 |
| 1 | D4:0 | SOD-123_2Side | D4:13 |
| 1 | D4:1 | SOD-123_2Side | D4:12 |
| 1 | D4:2 | SOD-123_2Side | D4:11 |
| 1 | D4:3 | SOD-123_2Side | D4:10 |
| 1 | D4:4 | SOD-123_2Side | D4:9 |
| 1 | D4:5 | SOD-123_2Side | D4:8 |
| 1 | D5:0 | SOD-123_2Side | D5:13 |
| 1 | D5:1 | SOD-123_2Side | D5:12 |
| 1 | D5:2 | SOD-123_2Side | D5:11 |
| 1 | D5:3 | SOD-123_2Side | D5:10 |
| 1 | D5:4 | SOD-123_2Side | D5:9 |
| 1 | D5:5 | SOD-123_2Side | D5:8 |
| 1 | DTSM-6 | ADTSJW65RV | S0 |
| 1 | GND | Pad | P8 |
| 1 | LEDa | MX_LED | LED_A1 |
| 1 | LEDa | SM0805 | RA1 |
| 1 | LEDb | SM0805 | RB1 |
| 1 | LEDb | MX_LED | LED_B1 |
| 1 | LEDc | SM0805 | RC1 |
| 1 | LEDc | MX_LED | LED_C1 |
| 1 | MCP23018_SSOP | adafruit-SSOP24 | U2 |
| 1 | MISO | Pad | P1 |
| 1 | MOSI | Pad | P6 |
| 1 | RES | Pad | P7 |
| 1 | SCK | Pad | P5 |
| 1 | STAB200 | STAB_PCB940 | S2 |
| 1 | SW1:0 | MX_FLIP | SW1:13 |
| 1 | SW1:1 | MX_FLIP | SW1:12 |
| 1 | SW1:2 | MX_FLIP | SW1:11 |
| 1 | SW1:3 | MX_FLIP | SW1:10 |
| 1 | SW1:4 | MX_FLIP | SW1:9 |
| 1 | SW2:0 | MX_FLIP | SW2:13 |
| 1 | SW2:1 | MX_FLIP | SW2:12 |
| 1 | SW2:2 | MX_FLIP | SW2:11 |
| 1 | SW2:3 | MX_FLIP | SW2:10 |
| 1 | SW2:4 | MX_FLIP | SW2:9 |
| 1 | SW2:5 | MX_FLIP | SW2:8 |
| 1 | SW3:0 | MX_FLIP | SW3:13 |
| 1 | SW3:1 | MX_FLIP | SW3:12 |
| 1 | SW3:2 | MX_FLIP | SW3:11 |
| 1 | SW3:3 | MX_FLIP | SW3:10 |
| 1 | SW3:4 | MX_FLIP | SW3:9 |
| 1 | SW3:5 | MX_FLIP | SW3:8 |
| 1 | SW4:0 | MX_FLIP | SW4:13 |
| 1 | SW4:1 | MX_FLIP | SW4:12 |
| 1 | SW4:2 | MX_FLIP | SW4:11 |
| 1 | SW4:3 | MX_FLIP | SW4:10 |
| 1 | SW4:4 | MX_FLIP | SW4:9 |
| 1 | SW4:5 | MX_FLIP | SW4:8 |
| 1 | SW5:0 | MX_FLIP | SW5:13 |
| 1 | SW5:1 | MX_FLIP | SW5:12 |
The 124 most common of 129 parts.
Questions
How big is the ErgoDOX PCB?
It measures 111 × 96.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ErgoDOX use?
129 parts, built around the ATMEGA32U4. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ErgoDOX KiCad files?
From the regack/depot repository on GitHub, at the commit this page was made from: the board is ergot/ErgoT.19.2/ErgoDOX.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ErgoDOX design in my own project?
Its repository states no licence, so its author keeps all rights: ask regack before reusing the design.
More from regack/depot
3- 2 layers55.9 × 59.7 mm
- 2 layers36.8 × 18.3 mm
Similar boards
- 2 layers89 × 100 mm
Hub16
joshajohnson/Hub16
A macro pad with 16 keys, two rotary encoders, a four port USB hub, and plenty of LEDs!
132 parts388 - 2 layers22.9 × 36.7 mm
Usb2usb
tmk/USB2USB_Converter
USB to USB keyboard protocol converter supported by TMK keyboard firmware
26 parts152 - 2 layers303.6 × 96.1 mm
- 2 layers114.9 × 77 mm
- 2 layers444.1 × 151.2 mm
Gh80-3003
evyd13/gh80-series
GH80-1800, GH80-3700 and GH80-3003 by Evy (aka anykeys.eu)
287 parts69CC-BY-SA-4.0 - 2 layers232.2 × 76.7 mm
- 2 layers373.2 × 131.8 mm
- 2 layers17.8 × 33 mm
