
LCD OLinuXino-5TS Rev.B
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

Kicad project files for my senior design PCB.
Project1 is an open-source printed circuit board by reedjosh, from the reedjosh/senior_design_pcb repository on GitHub. It is a 2-layer board of 143.5 × 22.9 mm with 56 parts on 59 nets, routed with 841 tracks and 63 vias.
It is built around the ICL7136CPL and LT1460GIZ-5#PBF. Its parts include 27 connectors, 8 resistors, 5 capacitors, 2 ICs and 1 diode.
Just install Kicad and open 'project1.pro'
| Qty | Value | Footprint | References |
|---|---|---|---|
| 23 | CONN_02X01 | IDC:Net_Tie_SMD | P10, P11, P12, P13, P14, P15, P16, P17, P18, P19, P20, P21, P22, P23, P24, P25 +7 |
| 3 | 180k | Resistors_ThroughHole:Resistor_Horizontal_RM7mm | R1, R5, R7 |
| 3 | CONN_02X04 | IDC:IDC_Header_Straight_10pins | P3, P4, P6 |
| 2 | 10k | Potentiometers:Potentiometer_Bourns_3296W_3-8Zoll_Inline_ScrewUp | RV1, RV2 |
| 2 | 39k | Resistors_ThroughHole:Resistor_Horizontal_RM7mm | R4, R6 |
| 1 | 0.01u | Capacitors_ThroughHole:C_Rect_L7_W2.5_P5 | C3 |
| 1 | 0.01uF | Capacitors_ThroughHole:C_Rect_L7_W2.5_P5 | C5 |
| 1 | 0.047u | Capacitors_ThroughHole:C_Rect_L7_W2.5_P5 | C4 |
| 1 | 0.1uF | Capacitors_ThroughHole:C_Rect_L7_W2.5_P5 | C2 |
| 1 | 1.8M | Resistors_ThroughHole:Resistor_Horizontal_RM7mm | R2 |
| 1 | 1M | Resistors_ThroughHole:Resistor_Horizontal_RM7mm | R3 |
| 1 | 50pF | Capacitors_ThroughHole:C_Rect_L7_W2.5_P5 | C1 |
| 1 | 5V | Connect:PINTST | W3 |
| 1 | 820 | Resistors_ThroughHole:Resistor_Horizontal_RM7mm | R8 |
| 1 | 9V | Connect:PINTST | W1 |
| 1 | CONN_01X02 | Pin_Headers:Pin_Header_Straight_1x02 | P1 |
| 1 | GND | Connect:PINTST | W2 |
| 1 | ICL7136CPL | Housings_DIP:DIP-40_W15.24mm | I1 |
| 1 | LCD-S101D40TR | IDC:LCD-S101D40TR | LCD1 |
| 1 | LED | LEDs:LED-3MM | D1 |
| 1 | LT1460GIZ-5 | TO_SOT_Packages_THT:TO-92_Inline_Narrow_Oval | U1 |
| 1 | Ref1 | Connect:PINTST | W4 |
| 1 | Ref2 | Connect:PINTST | W5 |
| 1 | TS912IN | Housings_DIP:DIP-8_W7.62mm | U2 |
The 52 most common of 56 parts.

OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!



GEIGEIGEIST/KLOTZ
KLOTZ is 34 keys column-staggered split keyboard. It uses an encoder and three status LEDs on each side.

ergonautkb/one
Ergonaut One is an open-source ergonomic wireless split mechanical keyboard designed by Ergonaut Keyboards.

matthewcieplak/super-sixteen
Code and schematics for the Super Sixteen Eurorack sequencer

EnriqueNeyra/Aeroq
An Indoor Air Quality Monitor Powered by ESP32, SCD40, and SEN54
It measures 143.5 × 22.9 mm and has 2 copper layers, 1.6 mm thick.
56 parts, built around the ICL7136CPL and LT1460GIZ-5#PBF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the reedjosh/senior_design_pcb repository on GitHub, at the commit this page was made from: the board is project1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask reedjosh before reusing the design.