2 layers98 × 36.2 mm
4 layers77 × 81 mm
Testekicad
rebedmos/Testekicad- Size
- 77 × 81 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 84
- Nets
- 106
- Pads
- 328
- Tracks, vias
- 669, 100
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 4 Oct 2024
- Updated
- 4 Oct 2024
Overview
Testekicad is an open-source printed circuit board by rebedmos, from the rebedmos/Testekicad repository on GitHub. It is a 4-layer board of 77 × 81 mm with 84 parts on 106 nets, routed with 669 tracks and 100 vias.
It is built around the RP2040, HLK-2M05 and W25Q32FVSSIG, with the AP2112K-3.3, USBLC6-2SC6 and W5500 among its other parts. Its parts include 36 capacitors, 26 resistors, 5 ICs, 4 connectors and 3 diodes. It belongs with the RP2040 boards of this library.
Main components
8
RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
HLK-2M05
SIP,30x16mm0.1W 16mm 19mm 2W 30mm 3kV 400mA 50mVp-p 5V 90VAC~245VAC AC-DC Short Circuit Protection、Over Current Protection SIP,30x16mm AC-DC Power Modules ROHSHI-LINKAC-DC Power Modules
W25Q32FVSSIG
SOIC-8-208milSOIC-8-208mil NOR FLASH ROHSWinbond ElecNOR FLASH
AP2112K-3.3
SOT253.3V 600mA CMOS Low Dropout Linear Regulator with EnableDiodes IncorporatedUncategorised
USBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
W5500
LQFP-48_7x7-40℃~+85℃ 10BASE-T、100BASE-TX 3.3V 32KB SPI SPI Wake-up function、Programmable LED indication、Low-power mode Yes LQFP-48(7x7) Ethernet Controllers ROHSWIZNETEthernet Controllers
FTR250-030
插件,P=5.1mm-40℃~+85℃ 1A 250V 30mA 35Ω 5s 600mW 60mA 90Ω 插件,P=5.1mm Resettable Fuses ROHSFTRResettable Fuses
PMEG2005EH
SOD-123F1 Independent 10A 200uA@20V 20V 390mV@500mA 500mA SOD-123F Schottky Diodes ROHSNexperiaSchottky Diodes
Parts
84| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C16, C18, C20, C22, C23, C24, C25, C28, C29, C31 |
| 10 | 100nF/6.3V | Capacitor_SMD:C_0402_1005Metric | C1, C5, C6, C8, C9, C10, C11, C12, C13, C15 |
| 4 | 1uF | Capacitor_SMD:C_0402_1005Metric | C17, C26, C27, C30 |
| 4 | 330R | Resistor_SMD:R_0402_1005Metric | R12, R24, R25, R26 |
| 4 | 3R3 | Resistor_SMD:R_0402_1005Metric | R15, R16, R17, R18 |
| 4 | 49R9 | Resistor_SMD:R_0402_1005Metric | R19, R20, R21, R22 |
| 3 | 4k7 | Resistor_SMD:R_0402_1005Metric | R5, R6, R10 |
| 2 | 18pF | Capacitor_SMD:C_0402_1005Metric | C4, C7 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R1, R9 |
| 2 | 1uF/6.3V | Capacitor_SMD:C_0402_1005Metric | C2, C3 |
| 2 | 27R | Resistor_SMD:R_0402_1005Metric | R7, R8 |
| 2 | 5k1 | Resistor_SMD:R_0402_1005Metric | R13, R14 |
| 2 | 68nF | Capacitor_SMD:C_0402_1005Metric | C32, C33 |
| 2 | C_Small | Capacitor_SMD:C_0402_1005Metric | C19, C21 |
| 2 | FerriteBead_Small | Inductor_SMD:L_0402_1005Metric | FB1, FB2 |
| 2 | LED | LED_SMD:LED_0603_1608Metric | D2, D25 |
| 2 | NOPOP | Button_Switch_SMD:SW_SPST_FSMSM | SW1, SW2 |
| 1 | 0R | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 10R | Resistor_SMD:R_0402_1005Metric | R23 |
| 1 | 12MHz | Crystal:Crystal_SMD_SeikoEpson_TSX3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 12k4/1% | Resistor_SMD:R_0402_1005Metric | R11 |
| 1 | 1M | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 1nF/2kV | Capacitor_SMD:C_1206_3216Metric | C35 |
| 1 | 220uF | Capacitor_SMD:CP_Elec_8x10 | C36 |
| 1 | 22nF | Capacitor_SMD:C_0402_1005Metric | C34 |
| 1 | 25MHz | Crystal:Crystal_SMD_SeikoEpson_TSX3225-4Pin_3.2x2.5mm | Y2 |
| 1 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C14 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | Conn_01x02 | pixelGatewayLibrary:DB-8-5DP9 | J2 |
| 1 | Conn_01x06 | Connector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J7 |
| 1 | FTR250-030 | Fuse:Fuse_Bourns_MF-RG300 | F1 |
| 1 | HLK-2M05 | Converter_ACDC:Converter_ACDC_Hi-Link_HLK-2Mxx | PS1 |
| 1 | HRO-TYPE-C-31-M-12 | Type-C:HRO-TYPE-C-31-M-12-HandSoldering | USB1 |
| 1 | LOGO | Aesthetics:gabriel_logo1 | G*** |
| 1 | NOPOP | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | NOPOP | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J5 |
| 1 | PMEG2005EH | Diode_SMD:D_SOD-123F | D1 |
| 1 | RJ45_Hanrun_HR911105A_Horizontal | Connector_RJ:RJ45_Hanrun_HR911105A_Horizontal | J1 |
| 1 | RP2040 | rp2040:RP2040 | U1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U14 |
| 1 | W25Q32FVSS | Silicon-Standard:SOIC-8 | U2 |
| 1 | W5500 | Package_QFP:LQFP-48_7x7mm_P0.5mm | U3 |
Questions
How big is the Testekicad PCB?
It measures 77 × 81 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Testekicad use?
84 parts, built around the RP2040, HLK-2M05, W25Q32FVSSIG and AP2112K-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Testekicad KiCad files?
From the rebedmos/Testekicad repository on GitHub, at the commit this page was made from: the board is teste_kicad.kicad_pcb and its schematic mcu_circuit.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Testekicad design in my own project?
Its repository states no licence, so its author keeps all rights: ask rebedmos before reusing the design.
Similar boards
- 2 layers101 × 76.2 mm
Boardlock
ECE477Group13/hardware_pcb
GitHub backup of PCB design files (Schematic and Board files)
131 parts - 2 layers78 × 54 mm
- 2 layers100 × 90 mm
- 4 layers60.1 × 99.4 mm
Ti Circle v1.0
raju-gudala/Custom-Flight-Controller-Carrier-Board
A custom carrier board for pixhawk orange cube+ flight controller
79 parts - 4 layers90 × 57 mm
- 2 layers45 × 55 mm
- 2 layers50 × 50 mm
