
Pico ButtonBoard v1
RealtimeRoboticsGroup/electrical
This project is open-source hardware and is licensed under the Solderpad Hardware License v2.1 (the "License"), which is a permissive license based on the Apache License, Version 2.0.

This project is open-source hardware and is licensed under the Solderpad Hardware License v2.1 (the "License"), which is a permissive license based on the Apache License, Version 2.0.
Pico CAN is an open-source printed circuit board by RealtimeRoboticsGroup, from the RealtimeRoboticsGroup/electrical repository on GitHub. It is a 2-layer board of 70 × 53 mm with 18 parts on 43 nets, routed with 282 tracks and 15 vias.
It is built around the MCP2558FD-H/SN and RASPBERRY PI PICO 2. Its parts include 5 capacitors, 3 ICs, 3 connectors and 1 resistor. It belongs with the RP2040 and RP2350 boards of this library.
This project is open-source hardware and is licensed under the Solderpad Hardware License v2.1 (the "License"), which is a permissive license based on the Apache License, Version 2.0.
You may use this work under the terms of the Solderpad Hardware License v2.1, or, at your option, under the terms of the Apache License, Version 2.0.
Solderpad v2.1: Solderpad Hardware License v2.1 - Solderpad Hardware License
Apache 2.0: https://www.apache.org/licenses/LICENSE-2.0
SPDX-License-Identifier: Apache-2.0 WITH SHL-2.1
Place this near your Title Block or in the Notes section of your first sheet.
LEGAL NOTICE Copyright © 2026 [Your Name/Organization]. Licensed under the Solderpad Hardware License v2.1 (the "License"); you may not use this work except in compliance with the License. You may obtain a copy of the License at: Solderpad Hardware License v2.1 - Solderpad Hardware License SPDX-License-Identifier: Apache-2.0 WITH SHL-2.1
Space on a PCB is usually at a premium. You can use this condensed version on the back of the board (Bottom Silkscreen):
© 2026 [Your Name] Licensed under Solderpad v2.1 https://solderpad.org/SHL-2.1/
If you want to signal that this is open-source hardware visually, it is common practice to add the Open Source Hardware Logo (a gear with a missing tooth) next to the license text. Most CAD libraries (like the SparkFun or Adafruit libraries) already have this logo as a "footprint" you can simply drop onto your board.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 0.1uF-25V-10%-0805 | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4, C5 |
| 4 | MountingHole | MountingHole:MountingHole_3.7mm | H1, H2, H3, H4 |
| 2 | CAN | Pico-CAN:70555-0001 | J2, J3 |
| 1 | 1.50k-1%-0805 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 4.0 MHz | Pico-CAN:ECS-5032MV | U2 |
| 1 | Expansion | Connector_PinHeader_2.54mm:PinHeader_2x13_P2.54mm_Vertical | J1 |
| 1 | LOGO | Pico-CAN:SpaceCookiesLogo-10mm | G*** |
| 1 | MCP2518FDT-H/SL | Package_SO:SO-14_3.9x8.65mm_P1.27mm | U3 |
| 1 | MCP2558FD | Package_SO:SO-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | RaspberryPi_Pico2 | Module:RaspberryPi_Pico_Common_Unspecified | A1 |

RealtimeRoboticsGroup/electrical
This project is open-source hardware and is licensed under the Solderpad Hardware License v2.1 (the "License"), which is a permissive license based on the Apache License, Version 2.0.

RealtimeRoboticsGroup/electrical
This project is open-source hardware and is licensed under the Solderpad Hardware License v2.1 (the "License"), which is a permissive license based on the Apache License, Version 2.0.

RealtimeRoboticsGroup/electrical
This project is open-source hardware and is licensed under the Solderpad Hardware License v2.1 (the "License"), which is a permissive license based on the Apache License, Version 2.0.

RealtimeRoboticsGroup/electrical
This project is open-source hardware and is licensed under the Solderpad Hardware License v2.1 (the "License"), which is a permissive license based on the Apache License, Version 2.0.

RealtimeRoboticsGroup/electrical
This project is open-source hardware and is licensed under the Solderpad Hardware License v2.1 (the "License"), which is a permissive license based on the Apache License, Version 2.0.

RealtimeRoboticsGroup/electrical
This project is open-source hardware and is licensed under the Solderpad Hardware License v2.1 (the "License"), which is a permissive license based on the Apache License, Version 2.0.

RealtimeRoboticsGroup/electrical
This project is open-source hardware and is licensed under the Solderpad Hardware License v2.1 (the "License"), which is a permissive license based on the Apache License, Version 2.0.

RealtimeRoboticsGroup/electrical
This project is open-source hardware and is licensed under the Solderpad Hardware License v2.1 (the "License"), which is a permissive license based on the Apache License, Version 2.0.

RealtimeRoboticsGroup/electrical
This project is open-source hardware and is licensed under the Solderpad Hardware License v2.1 (the "License"), which is a permissive license based on the Apache License, Version 2.0.

RealtimeRoboticsGroup/electrical
This project is open-source hardware and is licensed under the Solderpad Hardware License v2.1 (the "License"), which is a permissive license based on the Apache License, Version 2.0.

RealtimeRoboticsGroup/electrical
This project is open-source hardware and is licensed under the Solderpad Hardware License v2.1 (the "License"), which is a permissive license based on the Apache License, Version 2.0.

RealtimeRoboticsGroup/electrical
This project is open-source hardware and is licensed under the Solderpad Hardware License v2.1 (the "License"), which is a permissive license based on the Apache License, Version 2.0.

Seeed-Studio/OSHW-reCamera-Series
reCamera is a series of open-source AI cameras.

Maritime-Hacking-Village/Badge-2025
Public repository for the official MHV 2025 badge.


frc971/electrical
This repo contains the electrical files for the 971 FRC team. The files include PCBs and the electrical system diagrams. The PCBs are created using KiCad.

zinedkahitaf-lang/AKD-SAFE-SourceControl
Infrastructure-Based Active Engineering Safety Platform. Move the safety burden from the worker to the hazard. Engineering prototype - not a certified safety device.

XLNC-APEX/WRO_FE_2026_NATIONAL
XLNC APEX team's repository for WRO Future Engineers 2026 national level. Making a cool car.

Unosoluciones/De-RCA-a-BT
Driver para conectar por bluetooth cualquier dispositivo con salida RCA

It measures 70 × 53 mm and has 2 copper layers, 1.6 mm thick.
18 parts, built around the MCP2558FD-H/SN and RASPBERRY PI PICO 2. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the RealtimeRoboticsGroup/electrical repository on GitHub, at the commit this page was made from: the board is circuit-boards/Pico-CAN/Pico-CAN.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask RealtimeRoboticsGroup before reusing the design.