4 layers66.3 × 40.2 mm
Cm4 drone
dridri/bcflight
Raspberry Pi based drone flight controller and remote control
56 parts175GPL-3.0
2 layers30 × 85 mm
Transmitter PCB
RDVdev/Interupt-handlersEsw project
- Size
- 30 × 85 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 9
- Nets
- 34
- Pads
- 62
- Tracks, vias
- 46, 4
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 11 Aug 2025
- Updated
- 1 Dec 2025
Overview
Transmitter PCB is an open-source printed circuit board by RDVdev, from the RDVdev/Interupt-handlers repository on GitHub. It is a 2-layer board of 30 × 85 mm with 9 parts on 34 nets, routed with 46 tracks and 4 vias.
It is built around the RFM95W-868S2. Its parts include 2 connectors and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdInterupt-handlers
Esw project Topic:- LoRaWAN
Members-
- Tatva
- Aryan
- Priyanka
- Devansh
Guide-
- Aftab hussain
TA-
- Ruthwik
Parts
9| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | Arduino_Nano_33_IoT_Socket | PCM_arduino-library:Arduino_Nano_33_IoT_Socket | A1 |
| 1 | DBN_HDR | Connector_PinHeader_2.00mm:PinHeader_1x02_P2.00mm_Vertical | J2 |
| 1 | PWR_IN | Connector_PinHeader_2.00mm:PinHeader_1x02_P2.00mm_Vertical | J1 |
| 1 | RFM95W-868S2 | RF_Module:HOPERF_RFM9XW_THT | U1 |
| 1 | TX_BTN | Button_Switch_SMD:SW_SPST_PTS645Sx43SMTR92 | SW |
The 5 most common of 9 parts.
Questions
How big is the Transmitter PCB PCB?
It measures 30 × 85 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Transmitter PCB use?
9 parts, built around the RFM95W-868S2. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Transmitter PCB KiCad files?
From the RDVdev/Interupt-handlers repository on GitHub, at the commit this page was made from: the board is Transmitter PCB/Transmitter PCB.kicad_pcb and its schematic Transmitter PCB/Transmitter PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Transmitter PCB design in my own project?
Its repository states no licence, so its author keeps all rights: ask RDVdev before reusing the design.
Similar boards
- 4 layers83 × 109 mm
- 2 layers57 × 35.5 mm
- 2 layers45 × 53 mm
LoRa Node
cernohorsky/LoRa-Node
Simple LoRa Node based on Arduino Pro mini with RFM95W module and PCB antenna.
35 parts66 - 2 layers72 × 27 mm
- 2 layers61.5 × 18.7 mm
LoRA USBStick
ElectronicCats/CatWAN_USB_Stick
An Open Source USB Stick compatible with LoRa and LoRaWAN with Cortex M0+. To connect, review and analyze packages of LoRa®
36 parts50GPL-3.0 - 2 layers79.2 × 68.8 mm
Environment slave
pcbcupid/Lora-Wireless-Sensor-Network
A wireless sensor network based on Lora and esp32C3. This repo will help you build a complete product from scratch to finish!
72 parts30MIT - 2 layers50 × 25 mm
LoRa Environmental Sensors
spielhuus/LoRa-Environmental-Sensors
ATtiny85 based LoRa atmospheric sensor board with BME280
5 parts28