
I2c-32io
rdoetjes/tuts
Assembly of random tutorials, that can be referenced in videos and YT comments

Assembly of random tutorials, that can be referenced in videos and YT comments
C64LED is an open-source printed circuit board by rdoetjes, from the rdoetjes/tuts repository on GitHub. It is a 2-layer board with 16 parts on 49 nets, routed with 257 tracks and 0 vias.
It is built around the L7805, BC547 and GP02-40-E3. Its parts include 3 capacitors, 3 ICs, 2 resistors, 2 connectors and 1 diode.
In the underlying directories, you will find software I have written for training videos and other tutorials. Many of these videos are on https://www.youtube.com/channel/CallousCoder
Many different languages are covered, ranging from MUMPS (M) to modern day languages like Zig (which I adore) and Rust. All these tutorials are based around small (private) projects, that I either created purposely for videos or have been created for small private projects.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | .1uF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C2, C3 |
| 2 | 74LS541 | Package_DIP:DIP-20_W7.62mm_Socket | U1, U2 |
| 2 | HDSP-4830_2 | Display:HDSP-4830 | BAR1, BAR2 |
| 2 | R_Network08 | Resistor_THT:R_Array_SIP9 | RN1, RN2 |
| 1 | .1uF | Capacitor_THT:C_Disc_D6.0mm_W2.5mm_P5.00mm | C1 |
| 1 | 100K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1 |
| 1 | 1K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R2 |
| 1 | BC547 | Package_TO_SOT_THT:TO-92_Inline | Q1 |
| 1 | Barrel_Jack | Connector_BarrelJack:BarrelJack_CUI_PJ-063AH_Horizontal_CircularHoles | J2 |
| 1 | Conn_01x10_Male | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J1 |
| 1 | GP0240 | Diode_THT:D_DO-34_SOD68_P7.62mm_Horizontal | D1 |
| 1 | L7805 | Package_TO_SOT_THT:TO-220-3_Vertical | U3 |

rdoetjes/tuts
Assembly of random tutorials, that can be referenced in videos and YT comments

rdoetjes/tuts
Assembly of random tutorials, that can be referenced in videos and YT comments


peterheinrich/InternetOverSpaghetti
Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.

telec16/modular-synth
Little side project, don't expect much updates.

ashishkumarpardeshi/DIY_Oxygen_Analyzer
This repository is for Design and Development of DIY Oxygen Analyzer Prototyping Board, Writing Code and Calibration.




bmatthieu3/clockdivider
A simple clock divider module made with an Atmega328p
16 parts, built around the L7805, BC547 and GP02-40-E3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the rdoetjes/tuts repository on GitHub, at the commit this page was made from: the board is asm/c64/io_latch/schematic/C64LED.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask rdoetjes before reusing the design.