

Regs
Arquitetura de processador conceitual
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 74
- Nets
- 137
- Pads
- 497
- Tracks, vias
- 1,210, 12
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 11 Dec 2025
- Updated
- 24 Aug 2026
Overview
Regs is an open-source printed circuit board by rcapaverde, from the rcapaverde/cubo repository on GitHub. It is a 2-layer board with 74 parts on 137 nets, routed with 1,210 tracks and 12 vias.
It is built around the 74LS374PC and 74LS00SC. Its parts include 19 resistors, 19 diodes, 17 capacitors, 17 ICs and 1 connector.
Main components
2README
README.mdcubo - um processador conceitual
Parts
74| Qty | Value | Footprint | References |
|---|---|---|---|
| 19 | LED | LED_THT:LED_D5.0mm | D1, D2, D3, D4, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21 +3 |
| 18 | 470R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R1, R2, R3, R4, R5, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20 +2 |
| 17 | 100nF | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C1, C2, C3, C5, C6, C7, C8, C10, C12, C13, C14, C15, C17, C26, C28, C29 +1 |
| 9 | 74LS374 | Package_DIP:DIP-20_W7.62mm | U1, U2, U3, U5, U6, U7, U8, U9, U10 |
| 4 | 74LS138 | Package_DIP:DIP-16_W7.62mm_Socket | U12, U13, U14, U15 |
| 2 | 74LS06 | Package_DIP:DIP-14_W7.62mm_Socket | U19, U20 |
| 1 | 470R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R21 |
| 1 | 4K7 | Resistor_THT:R_Array_SIP9 | RN1 |
| 1 | 74LS00 | Package_DIP:DIP-14_W7.62mm_Socket | U18 |
| 1 | 74LS244 | Package_DIP:DIP-20_W7.62mm_Socket | U17 |
| 1 | BUS | cardedgeslot:Card Edge Slot 28+44 | J1 |
More from rcapaverde/cubo
12- 2 layers120.6 × 47 mm

- 2 layers137.8 × 73.6 mm

- 2 layers160.7 × 210 mm

- 2 layers297 × 125 mm

- 2 layers160.7 × 210 mm

- 2 layers

- 2 layers126.3 × 210 mm

- 2 layers274.3 × 124.5 mm

- 2 layers297 × 75 mm

- 2 layers77.5 × 125 mm

- 2 layers209.5 × 125.1 mm

- 2 layers209.5 × 125.1 mm

Similar boards
- 2 layers85.7 × 54 mm

ProDOS ROM Drive
tjboldt/ProDOS-ROM-Drive
A bootable 1 MB solid state disk for Apple ][ computers
17 parts77MIT - 4 layers337.6 × 105.7 mm

ISA CGA
hkzlab/CGA_Redux
The Color Graphics Adapter Redux board is a more or less faithful clone of the original IBM CGA, based on the original schematics
170 parts56 - 4 layers203.2 × 105.4 mm

- 2 layers99.1 × 99.1 mm

Plusd
alvaroalea/plusD-clone
Schematic of a clone of the Disk Interface +D for the ZX Spectrum
69 parts25 - 4 layers194.5 × 188.6 mm

MyCpu
fortinsylvain/MyCpu
Home brew CPU Hardware with 1-bit ALU implementation using 74LSxx, a micro-code and assembler coded in C#.
162 parts18MIT - 2 layers98.3 × 107.1 mm

Coco9511pak
barberd/coco9511pak
This board is a cartridge for the Tandy Radio Shack TRS-80 Color Computer (CoCo), an 8 bit computer produced between 1980 and 1991. It provides an Arithmetic Processor Unit (APU), the AMD 9511, to the CoCo.
44 parts13GPL-3.0 - 2 layers143 × 174.7 mm

Intellivision t card replic
abzman/intellivision-t-card
replica of the t-card development cart for the intellivision that takes standard ROMs
77 parts12Unlicense - 2 layers478 × 183 mm

Questions
What parts does the Regs use?
74 parts, built around the 74LS374PC and 74LS00SC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Regs KiCad files?
From the rcapaverde/cubo repository on GitHub, at the commit this page was made from: the board is pcb/regs/regs.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Regs design in my own project?
Its repository states no licence, so its author keeps all rights: ask rcapaverde before reusing the design.