2 layers70 × 120.3 mm
2 layers139.2 × 55.5 mm
Debug
ray33ee/DCT- Size
- 139.2 × 55.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 27
- Nets
- 88
- Pads
- 202
- Tracks, vias
- 286, 9
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 22 Nov 2024
- Updated
- 21 Jul 2025
Overview
Debug is an open-source printed circuit board by ray33ee, from the ray33ee/DCT repository on GitHub. It is a 2-layer board of 139.2 × 55.5 mm with 27 parts on 88 nets, routed with 286 tracks and 9 vias.
Its parts include 6 resistors, 5 diodes, 5 connectors, 1 IC and 1 switch.
Parts
27| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2, R3, R4, R5, R6 |
| 6 | SJ_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP1, JP2, JP3, JP4, JP5, JP6 |
| 5 | LED | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D2, D3, D5, D6, PWM1 |
| 2 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_2x01_P2.54mm_Vertical | J1, J2 |
| 2 | Conn_02x19_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x19_P2.54mm_Vertical | CN7, CN10 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | NUCLEO-G474RE | Library:G474 | U1 |
| 1 | PWR_LED | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | PWR1 |
| 1 | SW_MISC | Button_Switch_SMD:SW_SPST_FSMSM | SW2 |
| 1 | SW_RST | Button_Switch_SMD:SW_SPST_FSMSM | RST1 |
| 1 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP7 |
Questions
How big is the Debug PCB?
It measures 139.2 × 55.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Debug use?
27 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Debug KiCad files?
From the ray33ee/DCT repository on GitHub, at the commit this page was made from: the board is schematics/debug_board/debug/debug.kicad_pcb and its schematic schematics/PSU/PSU.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Debug design in my own project?
Its repository states no licence, so its author keeps all rights: ask ray33ee before reusing the design.
More from ray33ee/DCT
4- 2 layers47.5 × 27 mm
- 2 layers45.3 × 28.1 mm
- 2 layers19 × 15.2 mm
Similar boards
- 2 layers47.6 × 27.3 mm
- 2 layers77.4 × 77.4 mm
CORAZON LEDS CON FADE
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
27 parts915 - 2 layers44.2 × 29.3 mm
- 2 layers40 × 40 mm
- 2 layers22 × 42 mm
Nvme bm to e
CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
27 parts253GPL-3.0 - 2 layers80 × 61 mm
PicoProducer
pjgpetecodes/pico-streamdeck
This project is an OBS Controller using a Raspberry Pi Pico and CircuitPython.
27 parts230MIT - 2 layers186 × 45 mm
AddOnD
freeDSP/freeDSP-aurora
freeDSP ADAU1452 with 8 analog input, 8 analog outputs, S/P-DIF I/O, ADAT I/O, USB Audio Class2, WiFi, Bluetooth
27 parts226CC-BY-SA-4.0 - 2 layers29.6 × 40.6 mm
Dbwifi revB
ugcs/ddc
Drone Show Software is software designed for drone shows, allowing flight path planning as well as control of dozens of drones simultaneously in a synchronized manner.
27 parts223