2 layers70 × 120.3 mm
2 layers19 × 15.2 mm
ray33ee/DCT- Size
- 19 × 15.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 11
- Pads
- 24
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 22 Nov 2024
- Updated
- 21 Jul 2025
Overview
Print is an open-source printed circuit board by ray33ee, from the ray33ee/DCT repository on GitHub. It is a 2-layer board of 19 × 15.2 mm with 10 parts on 11 nets.
It is built around the PMBT2222A, BSS138 and S9012. Its parts include 6 resistors and 4 transistors.
Main components
3
PMBT2222A
SOT-231 NPN 10nA 1V 200mW 300 300MHz 40V 600mA 6V NPN SOT-23 Bipolar (BJT) ROHSPAKERBipolar (BJT)BSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETsS9012
SOT-23-55℃~+150℃ 1 PNP 100nA 25V 300MHz 300mW 400 500mA 5V 600mV PNP SOT-23 Bipolar (BJT) ROHSFOSANBipolar (BJT)
Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 2.7k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3, R7, R8 |
| 2 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R4, R5 |
| 2 | PMBT2222A | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q1, Q4 |
| 1 | 5.6k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R6 |
| 1 | BSS138 | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q2 |
| 1 | S9012 | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q3 |
Questions
How big is the Print PCB?
It measures 19 × 15.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Print use?
10 parts, built around the PMBT2222A, BSS138 and S9012. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Print KiCad files?
From the ray33ee/DCT repository on GitHub, at the commit this page was made from: the board is schematics/snap/print/print.kicad_pcb and its schematic schematics/PSU/PSU.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Print design in my own project?
Its repository states no licence, so its author keeps all rights: ask ray33ee before reusing the design.
More from ray33ee/DCT
4- 2 layers47.5 × 27 mm
- 2 layers139.2 × 55.5 mm
- 2 layers45.3 × 28.1 mm
Similar boards
- 2 layers68 × 40 mm
Stm32-io extend
hardenedlinux/cheap-pcb
Cheap PCB: Better understanding the current status of hardware supply chain
44 parts170CC0-1.0 - 4 layers38 × 80 mm
- 2 layers40.4 × 29.6 mm
Filament scale pcb
chof747/filament-scale-pcb
A small board for my samla-filament-scale-box
22 partsCC0-1.0 - 2 layers57.2 × 35.1 mm
- 2 layers83.3 × 76.1 mm
Srom
derekfountain/zx-spectrum-pico-rom
A Raspberry Pi Pico based device to emulate a ROM on a ZX Spectrum
31 parts44GPL-2.0 - 4 layers100 × 99.9 mm
Srom
derekfountain/zx-spectrum-pico-interface-one
A recreation of the ZX Spectrum Expansion System, a hardware Microdrive emulator
43 parts42GPL-2.0 - 6 layers95.9 × 90.2 mm
Cpb
OakwoodEngineering/ObiWanKomputer
The Obi Wan Komputer and Combined Payload Boards from the NyanSat project.
251 parts10 - 2 layers99.9 × 98.2 mm
Zx spectrum diagnostics
derekfountain/zx-spectrum-diagnostics
A hardware diagnostics board for the 48K ZX Spectrum
76 parts8GPL-3.0