2 layers70 × 79 mm
2 layers
ArduinoShield
RASCALUTK/megaPCB1- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 80
- Nets
- 46
- Pads
- 297
- Tracks, vias
- 51, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 1 Apr 2018
- Updated
- 20 Apr 2018
Overview
ArduinoShield is an open-source printed circuit board by RASCALUTK, from the RASCALUTK/megaPCB repository on GitHub. It is a 2-layer board with 80 parts on 46 nets, routed with 51 tracks and 0 vias.
It is built around the MCP6004-E/P, MAX6675ISA+ and NE555, with the PN2222A among its other parts. Its parts include 34 connectors, 18 resistors, 16 transistors, 4 ICs and 3 capacitors. It belongs with the microcontroller boards boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
4
MCP6004-E/P
PDIP-14-40℃~+125℃ 1.8V~6V 100uA 1MHz 1pA 1pA 23mA 28nV/√Hz@1kHz 2uV/℃ 4 4.5mV 600V/ms 76dB ESD protection Rail-to-Rail Input, Rail-to-Rail Output PDIP-14 Operational Amplifier ROHSMicrochip TechnologyOperational Amplifier
MAX6675ISA+
SOIC-8-20℃~+85℃ 3V~5.5V SPI SOIC-8 Interface - Specialized ROHSMaxim Integrated (Analog Devices)Interface - Specialized
NE555
SOP-8-20℃~+70℃ 1 1.5mA 200mA 4.5V~15V Adjustable duty cycle oscillation、Reset function、Duty cycle stabilization SOP-8 555 Timers / Counters ROHSGRTimers / Counters
PN2222A
TO-92-3-55℃~+150℃ 1 NPN 1A 300MHz 300mV 40V 625mW NPN TO-92-3 Bipolar (BJT) ROHSNTE ElectronicsBipolar (BJT)
README
README.mdmegaPCB
Parts
80| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | R | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R10, R11, R12, R13, R14, R15, R16, R17, R18 +2 |
| 12 | Q_NPN_CBE | TO_SOT_Packages_THT:TO-92_Inline_Narrow_Oval | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9, Q14, Q15, Q16 |
| 4 | PN2222A | TO_SOT_Packages_THT:TO-92_Molded_Narrow | Q10, Q11, Q12, Q13 |
| 2 | D | Diodes_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2 |
| 2 | POT | Potentiometers:Potentiometer_WirePads_largePads | RV1, RV2 |
| 1 | +12V_source | Connectors_Terminal_Blocks:TerminalBlock_Altech_AK300-2_P5.00mm | J34 |
| 1 | +12v | Connectors_Terminal_Blocks:TerminalBlock_Altech_AK300-2_P5.00mm | J28 |
| 1 | +24V_source | Connectors_Terminal_Blocks:TerminalBlock_Altech_AK300-2_P5.00mm | J33 |
| 1 | +5V_source | Connectors_Terminal_Blocks:TerminalBlock_Altech_AK300-2_P5.00mm | J21 |
| 1 | ASC712 | Socket_Strips:Socket_Strip_Straight_1x03_Pitch2.54mm | J20 |
| 1 | Arduino_Mega2560_Shield | Arduino:Arduino_Mega2560_Shield | XA1 |
| 1 | C | Capacitors_THT:C_Disc_D6.0mm_W2.5mm_P5.00mm | C1 |
| 1 | CP | Capacitors_THT:CP_Radial_D4.0mm_P1.50mm | C2 |
| 1 | CP | Capacitors_THT:CP_Radial_D5.0mm_P2.00mm | C3 |
| 1 | External Faul(N 0) | Connectors_Terminal_Blocks:TerminalBlock_Altech_AK300-2_P5.00mm | J14 |
| 1 | Flex_Sensor | Connectors_Terminal_Blocks:TerminalBlock_Altech_AK300-2_P5.00mm | J10 |
| 1 | Forward/Stop | Connectors_Terminal_Blocks:TerminalBlock_Altech_AK300-2_P5.00mm | J12 |
| 1 | Jog | Connectors_Terminal_Blocks:TerminalBlock_Altech_AK300-2_P5.00mm | J13 |
| 1 | LM337_TO220 | TO_SOT_Packages_THT:TO-220-3_Vertical | U2 |
| 1 | LM741 | Housings_DIP:DIP-8_W10.16mm_LongPads | U4 |
| 1 | LinActAnalog | Connectors_Terminal_Blocks:TerminalBlock_Altech_AK300-2_P5.00mm | J29 |
| 1 | LinActAnalog0 | Connectors_Terminal_Blocks:TerminalBlock_Altech_AK300-2_P5.00mm | J30 |
| 1 | LinActDirection | Connectors_Terminal_Blocks:TerminalBlock_Altech_AK300-2_P5.00mm | J31 |
| 1 | MAX6675 | Socket_Strips:Socket_Strip_Straight_1x05_Pitch2.54mm | J19 |
| 1 | MCP6004 | Housings_DIP:DIP-8_W10.16mm_LongPads | U3 |
| 1 | NE555 | Housings_DIP:DIP-8_W7.62mm_Socket_LongPads | U1 |
| 1 | Reverse/Stop | Connectors_Terminal_Blocks:TerminalBlock_Altech_AK300-2_P5.00mm | J15 |
| 1 | VFD analog Voltage | Connectors_Terminal_Blocks:TerminalBlock_Altech_AK300-2_P5.00mm | J11 |
| 1 | dirX0 | Connectors_Terminal_Blocks:TerminalBlock_Altech_AK300-2_P5.00mm | J17 |
| 1 | dirX1 | Connectors_Terminal_Blocks:TerminalBlock_Altech_AK300-2_P5.00mm | J2 |
| 1 | dirY | Connectors_Terminal_Blocks:TerminalBlock_Altech_AK300-2_P5.00mm | J5 |
| 1 | dirZ | Connectors_Terminal_Blocks:TerminalBlock_Altech_AK300-2_P5.00mm | J8 |
| 1 | enaX0 | Connectors_Terminal_Blocks:TerminalBlock_Altech_AK300-2_P5.00mm | J18 |
| 1 | enaX1 | Connectors_Terminal_Blocks:TerminalBlock_Altech_AK300-2_P5.00mm | J3 |
| 1 | enaY | Connectors_Terminal_Blocks:TerminalBlock_Altech_AK300-2_P5.00mm | J6 |
| 1 | enaZ | Connectors_Terminal_Blocks:TerminalBlock_Altech_AK300-2_P5.00mm | J9 |
| 1 | gnd_+5v | Connectors_Terminal_Blocks:TerminalBlock_Altech_AK300-2_P5.00mm | J24 |
| 1 | pulX0 | Connectors_Terminal_Blocks:TerminalBlock_Altech_AK300-2_P5.00mm | J16 |
| 1 | pulX1 | Connectors_Terminal_Blocks:TerminalBlock_Altech_AK300-2_P5.00mm | J1 |
| 1 | pulY | Connectors_Terminal_Blocks:TerminalBlock_Altech_AK300-2_P5.00mm | J4 |
| 1 | pulZ | Connectors_Terminal_Blocks:TerminalBlock_Altech_AK300-2_P5.00mm | J7 |
| 1 | xMax | Connectors_Terminal_Blocks:TerminalBlock_Altech_AK300-2_P5.00mm | J23 |
| 1 | xMin | Connectors_Terminal_Blocks:TerminalBlock_Altech_AK300-2_P5.00mm | J22 |
| 1 | yMax | Connectors_Terminal_Blocks:TerminalBlock_Altech_AK300-2_P5.00mm | J27 |
| 1 | yMin | Connectors_Terminal_Blocks:TerminalBlock_Altech_AK300-2_P5.00mm | J26 |
| 1 | zMax | Connectors_Terminal_Blocks:TerminalBlock_Altech_AK300-2_P5.00mm | J25 |
| 1 | zMin | Connectors_Terminal_Blocks:TerminalBlock_Altech_AK300-2_P5.00mm | J32 |
Questions
What parts does the ArduinoShield use?
80 parts, built around the MCP6004-E/P, MAX6675ISA+, NE555 and PN2222A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ArduinoShield KiCad files?
From the RASCALUTK/megaPCB repository on GitHub, at the commit this page was made from: the board is ArduinoShield.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ArduinoShield design in my own project?
Its repository states no licence, so its author keeps all rights: ask RASCALUTK before reusing the design.
Similar boards
- 2 layers
- 2 layers52.4 × 78.4 mm
- 2 layers45.7 × 19.8 mm
- 2 layers145 × 118 mm
- 4 layers95 × 95 mm
APEX v0
NANDHA0804/Apex-Diagnostic-Tool-V1
Hardware design and manufacturing files for Project Apex V1.0: a multi-functional diagnostic tool. Features a custom 4-layer PCB architecture driven by an ESP32 master and ATmega328P co-processor for high-performance…
146 parts - 2 layers129.9 × 63.6 mm
Traeger rev 2.3.0.kicad pro
jazzmonger/Traeger-PID-Controller
Traeger Smoker/Grill Controller based on an
45 parts36 - 2 layers176 × 82.6 mm
