
A2Pico2Lite
rallepalaveev/A2Pico2Lite
This repository is the home of the A2Pico2Lite-SMD reference hardware based on the RP2354A processor. It is an expansion mass storage card for Apple2 computers.

This repository is the home of the A2Pico2Lite-SMD reference hardware based on the RP2354A processor. It is an expansion mass storage card for Apple2 computers.
A2Pico2Lite SMD is an open-source printed circuit board by rallepalaveev, from the rallepalaveev/A2Pico2Lite repository on GitHub. It is a 4-layer board of 65.5 × 28.6 mm with 101 parts on 55 nets, routed with 662 tracks and 116 vias.
It is built around the SS14. Its parts include 19 capacitors, 16 resistors, 4 diodes, 2 ICs and 1 connector. It belongs with the RP2350 boards of this library.
This repository is the home of the A2Pico2Lite-SMD reference hardware based on the RP2354A processor. It is an expansion mass storage card for Apple2 computers. It is a limited version of the A2Pico2 design with the restriction that it can use only a USB stick as a storage device. Please refer to the repository at https://github.com/oliverschmidt/a2pico for general information on A2Pico2.
Version 1.0 is the initial design.
Version 1.1 is the current version with added parallel capacitors to the voltage dividers of the 5V non-tolerant GPIOs for correction of the waveforms.
The GPIO usage is as follows:
| GPIO | Usage |
|---|---|
| 0 | IRQ |
| 1 | PHI0 |
| 2 - 13 | A0 - A11 |
| 14-21 | D0-D7 |
| 25 | LED |
| 26 | DEVSEL |
| 27 | IOSEL |
| 28 | IOSTB |
| Qty | Value | Footprint | References |
|---|---|---|---|
| 50 | , , , , , , , , , , , , , , , +34 | ||
| 11 | 100n | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C9, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19 |
| 6 | 1k | Resistor_SMD:R_0402_1005Metric | R1, R3, R6, R8, R9, R13 |
| 4 | 2k | Resistor_SMD:R_0402_1005Metric | R2, R4, R5, R7 |
| 3 | 10uF | Capacitor_SMD:C_0603_1608Metric | C6, C7, C8 |
| 3 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C3, C4, C5 |
| 3 | SS14 | Diode_SMD:D_SMA | D1, D2, D3 |
| 2 | 12pF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C2 |
| 2 | 27 | Resistor_SMD:R_0402_1005Metric | R14, R15 |
| 2 | 5k1 | Resistor_SMD:R_0402_1005Metric | R10, R11 |
| 1 | clipboard:5dfb3da5-b7fb-448a-b8a5-5886f6c7228d | ||
| 1 | 100k | Resistor_SMD:R_0402_1005Metric | R12 |
| 1 | 27 | Resistor_SMD:R_0603_1608Metric | R16 |
| 1 | 3.3uH | Inductor_SMD:L_Wuerth_MAPI-2512 | L1 |
| 1 | 500mA | Fuse:Fuse_0805_2012Metric | FU1 |
| 1 | Crystal_SMD_Abracon_ABM8AIG-4Pin_3.2x2.5mm | Crystal:Crystal_SMD_Abracon_ABM8AIG-4Pin_3.2x2.5mm | X1 |
| 1 | LED_CHR | LED_SMD:LED_0603_1608Metric | LED1 |
| 1 | LOGO | LOGO | G1 |
| 1 | ME6211 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | OSHW-Logo2_7.3x6mm_SilkScreen | Symbol:OSHW-Logo2_7.3x6mm_SilkScreen | G2 |
| 1 | PinHeader_1x03_P2.54mm_Vertical | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | H2 |
| 1 | RP2354A_QFN-60_EP_7.75x7.75_Pitch0.4mm | Library:RP2350A_QFN-60_EP_7.75x7.75_Pitch0.4mm | U1 |
| 1 | SW_BOOTSEL | Button_Switch_SMD:SW_SPST_B3U-1000P | SW1 |
| 1 | SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | J1 |
| 1 | USB-C-16P-F(A40-00119-A52-12) | OLIMEX_Connectors-FP:USB2.0_TYPE-C(A40-00119-A52-12) | H1 |

rallepalaveev/A2Pico2Lite
This repository is the home of the A2Pico2Lite-SMD reference hardware based on the RP2354A processor. It is an expansion mass storage card for Apple2 computers.

rallepalaveev/A2Pico2Lite
This repository is the home of the A2Pico2Lite-SMD reference hardware based on the RP2354A processor. It is an expansion mass storage card for Apple2 computers.

JGAguado/Smart_Plant
The Smart Plant is a board that can be plugged directly on the soil, close to the plant, that allows the measurement of the environment (soil moisture, environment temperature & illuminance), and presents the…

ugcs/ddc
Drone Show Software is software designed for drone shows, allowing flight path planning as well as control of dozens of drones simultaneously in a synchronized manner.

eddyem/stm32samples
Code samples and ready projects based on bare-metal STM32



execuc/u2if
USB to interfaces implementing MicroPython "machine" module functionalities on a computer.

ZeroPhone/ZeroPhone-PCBs
PCB files for ZeroPhone - for gerbers and schematics, go to "Releases" tab!

It measures 65.5 × 28.6 mm and has 4 copper layers, 1 mm thick.
101 parts, built around the SS14. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the rallepalaveev/A2Pico2Lite repository on GitHub, at the commit this page was made from: the board is SMT/A2Pico2Lite-SMD.kicad_pcb and its schematic SMT/A2Pico2Lite-SMD.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask rallepalaveev before reusing the design.