

Microscope
- Size
- 21 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 19
- Pads
- 60
- Tracks, vias
- 83, 4
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 27 Feb 2024
- Updated
- 14 Sep 2024
Overview
Microscope is an open-source printed circuit board by rakennus, from the rakennus/microscope-led-retrofit repository on GitHub. It is a 2-layer board of 21 × 100 mm with 21 parts on 19 nets, routed with 83 tracks and 4 vias.
It is built around the OP07CDRG, AO3400A and MB10S, with the MMBT5551L and NE555D among its other parts. Its parts include 8 resistors, 4 capacitors, 3 transistors, 2 diodes and 2 connectors.
Main components
5OP07CDRG
SOIC-8-22V~-3V、3V~22V -40℃~+85℃ 1 1.8nA 10nV/√Hz 120dB 170V/ms 2.7mA 500kHz 500nV/℃ 60uV 800pA SOIC-8 Operational Amplifier ROHSHANSCHIP semiconductorOperational AmplifierAO3400A
SOT-23-55℃~+150℃ 1 N-channel 1.45V 1.4W 30V 48mΩ@2.5V 5.7A 50pF 630pF 75pF 7nC@10V N-Channel SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsMB10S
MBS-55℃~+150℃ 1.1V@400mA 1A 1kV 35A 5uA@1kV Single-Phase Rectifier MBS Bridge Rectifiers ROHSMDDBridge RectifiersMMBT5551L
SOT-23-55℃~+150℃ 1 NPN 100nA 160V 250mV 300mW 600mA 6V 80 NPN SOT-23 Bipolar (BJT) ROHSonsemiBipolar (BJT)NE555D
SOIC-80℃~+70℃ 10mA 4.5V~16V SOIC-8 555 Timers / Counters ROHSTexas InstrumentsTimers / Counters
README
README.mdmicroscope-led-retrofit
Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100n | Capacitor_SMD:C_0603_1608Metric | C3, C5 |
| 2 | 20k | Resistor_SMD:R_0603_1608Metric | R6, R7 |
| 2 | 51k | Resistor_SMD:R_0603_1608Metric | R4, R9 |
| 2 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q2, Q4 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 10n | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric | C4 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 2.2k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 22 | Resistor_SMD:R_1206_3216Metric | R2 |
| 1 | Conn_01x02_Socket | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J1 |
| 1 | Conn_01x03_Socket | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J3 |
| 1 | LED | LED_SMD:LED_PLCC_2835 | D1 |
| 1 | MB10S | MB10S:SOIC245P670X290-4N | D2 |
| 1 | MMBT5551L | Package_TO_SOT_SMD:SOT-23 | Q3 |
| 1 | NE555D | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | NE555D1 |
| 1 | OP07CDR | OP07CDR:SOIC127P599X175-8N | U1 |
More from rakennus/microscope-led-retrofit
2- 2 layers19 × 101 mm

- 2 layers17 × 90.5 mm

Similar boards
- 4 layers70.4 × 107.2 mm

- 2 layers121 × 75.5 mm

Jlctest
cjheath/jlcbasic
JLC Basic parts library for Kicad fetched and converted from EasyEDA
46 parts5 - 4 layers50 × 50 mm

- 2 layers38.1 × 101.6 mm

- 2 layers120.4 × 85.7 mm

ESPrinkler Retic PCB
slippery-carrot/ESPrinkler-Retic-Controller
8-Zone reticulation controller based on ESPHome for Home Assistant
142 parts6GPL-3.0 - 2 layers140 × 64 mm

Thermostat v3
Connicpu/thermostat
DIY Zigbee thermostat (ESP32-C6) with day/night schedule and a Home Assistant Lovelace card
101 partsMIT - 4 layers160 × 100 mm

Mastertemp esp32
ryanbjohnson/PentairMasterTempESP32
This folder is the KiCad project area for the MasterTemp 125 ESP32 interface board.
95 partsMIT - 2 layers81.5 × 41.5 mm

Questions
How big is the Microscope PCB?
It measures 21 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Microscope use?
21 parts, built around the OP07CDRG, AO3400A, MB10S and MMBT5551L. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Microscope KiCad files?
From the rakennus/microscope-led-retrofit repository on GitHub, at the commit this page was made from: the board is PCB/v0.1/microscope.kicad_pcb and its schematic PCB/v0.1/microscope.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Microscope design in my own project?
Its repository states no licence, so its author keeps all rights: ask rakennus before reusing the design.