Skip to the content
2 layers20.8 × 18.3 mmNe555-astable adapter, the printed circuit board in 3D

Ne555-astable adapter

rafw87/hardware-modules7

Set of DIY hardware modules.

Size
20.8 × 18.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
4
Nets
6
Pads
24
Tracks, vias
23, 0
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
27 Jan 2021
Updated
12 Nov 2022

Overview

Ne555-astable adapter is an open-source printed circuit board by rafw87, from the rafw87/hardware-modules repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 20.8 × 18.3 mm with 4 parts on 6 nets, routed with 23 tracks and 0 vias.

It is built around the NE555P. Its parts include 2 connectors, 1 capacitor and 1 IC. It belongs with the interfaces and adapters boards and the ESP32 and ESP8266 boards of this library.

Main components

1

README

modules/esp-32-board/README.md

ESP-32 board on Arduino footprint

ESP-WROOM-32 (or ESP32-SOLO-1) development kit with Micro-USB port, DC Input and ESP-PROG interface.

Based on Arduino Uno/Leonardo footprint, so (apart from interesting appearance) allows to use stands and (partially) enclosures from original Arduino.

Note: It's not an Arduino clone, so it's not compatible (neither electrically nor physically) with Arduino shields. Functionally it's evaluation board like ESP32-DevKitC.

Picture 1

Picture 2

Picture 2

FAB Layer

Resources

License

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Parts

4
QtyValueFootprintReferences
2Conn_01x07_MaleConnector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_VerticalJ1, J2
110 nFCapacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mmC1
1NE555PPackage_DIP:DIP-8_W7.62mmU1

More from rafw87/hardware-modules

3
  • 2 layers65 × 56 mmPower monitor hat, the printed circuit board in 3D

    Power monitor hat

    rafw87/hardware-modules

    Set of DIY hardware modules.

    53 parts7CC-BY-SA-4.0
  • 2 layers53.4 × 68.6 mmEsp-32-board, the printed circuit board in 3D

    Esp-32-board

    rafw87/hardware-modules

    Set of DIY hardware modules.

    39 parts7CC-BY-SA-4.0
  • 2 layers25.4 × 22.2 mmEsp prog adapter, the printed circuit board in 3D

    Esp prog adapter

    rafw87/hardware-modules

    Set of DIY hardware modules.

    4 parts7CC-BY-SA-4.0

Similar boards

  • 2 layers327.9 × 139 mmCoco2, the printed circuit board in 3D

    Coco2

    baldengineer/bit-preserve

    Project for capturing vintage, classic, aka old computer schematics in KiCad.

    147 parts446
  • 2 layers370.8 × 298.5 mm8 Bit Computer, the printed circuit board in 3D

    8 Bit Computer

    The-Invent0r/8-bit-Computer-PCB

    These are the KiCAD files for my 8-Bit Computer.

    323 parts142
  • 2 layers200 × 96 mmTouchtone555, the printed circuit board in 3D

    Touchtone555

    DarcyJProjects/touchtone555

    An open-source DIY, NE555-based analogue synthesizer - play notes with a stylus

    73 parts33
  • 4 layers340 × 210 mmYddraig, the printed circuit board in 3D

    Yddraig

    ddraig68k/hardware

    Schematic and CAD files for my 68K based computer

    224 parts29MIT
  • 2 layers152.9 × 74.9 mmClock, the printed circuit board in 3D

    Clock

    erikvanzijst/clock

    24H digital quartz clock from scratch

    82 parts21
  • 2 layers88.9 × 50.8 mmSynthCard, the printed circuit board in 3D

    SynthCard

    benjiaomodular/SynthCard

    I designed this project with the help of PCBWay. You can get a copy of these cards through the PCBWay Shared Projects page.

    16 parts19MIT
  • 4 layers194.5 × 188.6 mmMyCpu, the printed circuit board in 3D

    MyCpu

    fortinsylvain/MyCpu

    Home brew CPU Hardware with 1-bit ALU implementation using 74LSxx, a micro-code and assembler coded in C#.

    162 parts18MIT
  • 2 layers145.3 × 129.9 mmC128Diag, the printed circuit board in 3D

    C128Diag

    hackup/C128Diag

    Replica of the Commodore C128 Diagnostic Test cartridge Assy No. 325093-01.

    61 parts16

Questions

How big is the Ne555-astable adapter PCB?

It measures 20.8 × 18.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Ne555-astable adapter use?

4 parts, built around the NE555P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Ne555-astable adapter KiCad files?

From the rafw87/hardware-modules repository on GitHub, at the commit this page was made from: the board is modules/ne555-astable-adapter/ne555-astable-adapter.kicad_pcb and its schematic modules/power-monitor-hat/power-monitor-hat.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Ne555-astable adapter design in my own project?

Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).