

OutAna
Hardware for OpenPLC with raspberry PI Z and Mod. software OpenPlc
- Size
- 67.6 × 63.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 92
- Nets
- 78
- Pads
- 362
- Tracks, vias
- 818, 71
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20190905)
- Created
- 3 Dec 2019
- Updated
- 1 May 2023
Overview
OutAna is an open-source printed circuit board by radioelf, from the radioelf/OpenPlc repository on GitHub. It is a 2-layer board of 67.6 × 63.8 mm with 92 parts on 78 nets, routed with 818 tracks and 71 vias.
It is built around the MAX485ED, MCP4728-E/UN and TC7660M/TR, with the BAT54S and MMZ2012Y152B among its other parts. Its parts include 40 resistors, 25 capacitors, 10 diodes, 7 ICs and 2 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
5MAX485ED
SOP-8-40℃~+85℃ 1 1 1mA 32 4.75V~5.25V 5Mbps Half-Duplex Transceiver ±8kV SOP-8 RS-485 / RS-422 ICs ROHSHTCRS-485 / RS-422 ICsMCP4728-E/UN
MSOP-10-40℃~+125℃ 12 2.7V~5.5V 2LSB 4 40nA 6us I2C Integrated buffer、Power-on reset、Power-down mode、Programmable gain Voltage Buffer MSOP-10 Digital to Analog Converters (DAC) ROHSMicrochip TechnologyDigital To Analog Converters (DAC)TC7660M/TR
SOP-8-10V~-2.5V -40℃~+85℃ 10kHz 3V~9.5V 40uA 70Ω 98% Cascade support Inverted SOP-8 Charge Pumps ROHSHGSEMIDC-DC ConvertersBAT54S
SOT-231 Pair Series Connection 1V@100mA 200mA 2uA@25V 30V 600mA SOT-23 Schottky Diodes ROHSMDDSchottky DiodesMMZ2012Y152B
08050805 Ferrite Beads ROHSTDKFerrite Beads
README
README.mdOpenPlc
Hardware for OpenPLC with raspberry PI Z and Mod. software OpenPlc
Original code:
https://github.com/thiagoralves/OpenPLC_v3
Creative Commons License Disclaimer
UNLESS OTHERWISE MUTUALLY AGREED TO BY THE PARTIES IN WRITING, LICENSOR OFFERS THE WORK AS-IS AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING THE WORK, EXPRESS, IMPLIED, STATUTORY OR OTHERWISE, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTIBILITY, FITNESS FOR A PARTICULAR PURPOSE, NONINFRINGEMENT, OR THE ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OF ABSENCE OF ERRORS, WHETHER OR NOT DISCOVERABLE. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES, SO SUCH EXCLUSION MAY NOT APPLY TO YOU. EXCEPT TO THE EXTENT REQUIRED BY APPLICABLE LAW, IN NO EVENT WILL LICENSOR BE LIABLE TO YOU ON ANY LEGAL THEORY FOR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL, PUNITIVE OR EXEMPLARY DAMAGES ARISING OUT OF THIS LICENSE OR THE USE OF THE WORK, EVEN IF LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Parts
92| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | 100nF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C10, C11, C12, C13, C14, C15, C16, C17, C21, C22, C23, C24, C25 +2 |
| 10 | 1K | Resistor_SMD:R_0805_2012Metric | R9, R12, R15, R18, R31, R32, R34, R35, R36, R37 |
| 8 | 5K1 | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4, R5, R6, R7, R8 |
| 5 | 10K | Resistor_SMD:R_0805_2012Metric | R21, R22, R23, R24, R40 |
| 4 | 15R | Resistor_SMD:R_0805_2012Metric | R11, R14, R17, R20 |
| 4 | 1k8 | Resistor_SMD:R_0805_2012Metric | R10, R13, R16, R19 |
| 4 | 47nF | Capacitor_SMD:C_0805_2012Metric | C5, C6, C7, C8 |
| 4 | 750R | Resistor_SMD:R_0805_2012Metric | R25, R26, R27, R28 |
| 4 | BAT54S | Package_TO_SOT_SMD:SOT-23 | D3, D4, D5, D6 |
| 4 | XTR300 | Package_DFN_QFN:QFN-20-1EP_5x5mm_P0.65mm_EP3.35x3.35mm | U1, U2, U3, U4 |
| 2 | 100R | Resistor_SMD:R_0805_2012Metric | R38, R39 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric | C18, C19 |
| 2 | 4K7 | Resistor_SMD:R_0805_2012Metric | R29, R30 |
| 1 | 100pF | Capacitor_SMD:C_0805_2012Metric | C20 |
| 1 | 120R | Resistor_SMD:R_0805_2012Metric | R33 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | Conn_02x07_Odd_Even | Connector_IDC:IDC-Header_2x07_P2.54mm_Vertical | J1 |
| 1 | Conn_Output | Connector_Phoenix_MC:PhoenixContact_MCV_1,5_8-G-3.5_1x08_P3.50mm_Vertical | J2 |
| 1 | DATA | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | Jumper | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | Logo_Open_Hardware_Large | Symbol:OSHW-Logo2_9.8x8mm_SilkScreen | LOGO1 |
| 1 | MAX485E | Package_SO:PowerIntegrations_SO-8 | U7 |
| 1 | MCP4728 | Package_SO:MSOP-10_3x3mm_P0.5mm | U5 |
| 1 | MMZ2012Y152B | Inductor_SMD:L_0805_2012Metric | L1 |
| 1 | RUN | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | TC7660 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U6 |
| 1 | mA/V_A | LED_SMD:LED_0603_1608Metric | D7 |
| 1 | mA/V_B | LED_SMD:LED_0603_1608Metric | D8 |
| 1 | mA/V_C | LED_SMD:LED_0603_1608Metric | D9 |
| 1 | mA/V_D | LED_SMD:LED_0603_1608Metric | D10 |
The 88 most common of 92 parts.
More from radioelf/OpenPlc
2- 2 layers129.5 × 72.6 mm

- 2 layers66.2 × 63.5 mm

Similar boards
- 2 layers119.4 × 30.5 mm

Zynthian zynaptik
zynthian/zynthian-hw
Zynthian hardware stuff: PCBs, schemes, parts specifications, pin assignment, ...
49 parts156 - 2 layers255 × 92 mm

LoRaQuadV2
roloran/ROLORAN-Hardware
Custom PCB designs and cases/mounting tools for ROLORAN devices
82 partsGPL-2.0 - 4 layers90 × 100 mm

8ch v3
saewoonam/8ch_currentsource_jlc_v3
V3 of 8 channel current source for biasing superconducting circuits
237 parts - 4 layers100 × 77 mm

- 2 layers100 × 90 mm

- 4 layers80 × 72 mm

- 4 layers45 × 42.8 mm

Distribution amp for singapore dude
FilipCichowski/4-channel-distribution-amplifier
Modern distribution amplifier. Cheap and robust.
58 parts2 - 2 layers

Questions
How big is the OutAna PCB?
It measures 67.6 × 63.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the OutAna use?
92 parts, built around the MAX485ED, MCP4728-E/UN, TC7660M/TR and BAT54S. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the OutAna KiCad files?
From the radioelf/OpenPlc repository on GitHub, at the commit this page was made from: the board is hard/cad/Out_Analogica/OutAna/OutAna.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the OutAna design in my own project?
Its repository states no licence, so its author keeps all rights: ask radioelf before reusing the design.