Skip to the content
4 layers45 × 42.8 mmDistribution amp for singapore dude, the printed circuit board in 3D

Distribution amp for singapore dude

FilipCichowski/4-channel-distribution-amplifier2

Modern distribution amplifier. Cheap and robust.

Size
45 × 42.8 mm
Copper layers
4
Thickness
1.6 mm
Parts
58
Nets
56
Pads
184
Tracks, vias
271, 536
Pours
5
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
19 Mar 2025
Updated
14 Aug 2025

Overview

Distribution amp for singapore dude is an open-source printed circuit board by FilipCichowski, from the FilipCichowski/4-channel-distribution-amplifier repository on GitHub. It is a 4-layer board of 45 × 42.8 mm with 58 parts on 56 nets, routed with 271 tracks and 536 vias.

It is built around the TC7660M/TR, STCM11+ and TYPE-C16PIN. Its parts include 24 capacitors, 15 resistors, 6 inductors and 2 ICs. It belongs with the audio and music boards of this library.

Main components

3

README

README.md

4-channel-distribution-amplifier

Parts

58
QtyValueFootprintReferences
12100neasyeda2kicad:C0805C2, C5, C10, C16, C17, C18, C19, C20, C21, C22, C23, C24
551easyeda2kicad:R0805R3, R5, R7, R12, R15
410keasyeda2kicad:R0805R6, R9, R11, R14
420keasyeda2kicad:R0805R4, R8, R10, R13
4STCM11+easyeda2kicad:XFMR-SMD_STCM11XF1, XF2, XF3, XF4
4out_1easyeda2kicad:ANT-TH_KH-SMA-K513-GRF3, RF4, RF5, RF6
3470neasyeda2kicad:L0805L2, L3, L4
210ueasyeda2kicad:C1206C14, C15
2240peasyeda2kicad:C0805C1, C11
2330peasyeda2kicad:C0805C3, C9
2470uHeasyeda2kicad:IND-SMD_L4.0-W4.0L5, L6
24u7easyeda2kicad:C1206C12, C13
25k1easyeda2kicad:R0805R1, R2
275peasyeda2kicad:C0805C4, C8
12u2easyeda2kicad:C1206C7
1390peasyeda2kicad:C0805C6
182uHeasyeda2kicad:IND-SMD_L4.5-W4.0_CD43L1
1DIO2644Package_SO:TSSOP-14_4.4x5mm_P0.65mmU2
1TC7660M/TReasyeda2kicad:SOP-8_L4.9-W3.9-P1.27-LS6.0-BLU1
1TYPE-C16PINeasyeda2kicad:USB-C-SMD_TYPE-C16PINUSB1
1filtered_inputeasyeda2kicad:ANT-TH_KH-SMA-K513-GRF1
1unfiltered_inputeasyeda2kicad:ANT-TH_KH-SMA-K513-GRF2

Similar boards

  • 2 layers100 × 90 mmMcu board, the printed circuit board in 3D

    Mcu board

    Kononenko-K/IN12-STM32-Nixie-Clock

    STM32 Nixie clock project.

    66 parts3
  • 4 layers80 × 72 mmPH ORP Card, the printed circuit board in 3D

    PH ORP Card

    brandtks/AquaPicModules

    AquaPic modules, board design and firmware

    118 parts2
  • 2 layersSensor water, the printed circuit board in 3D

    Sensor water

    boiduykhanh/kicad-sensor-water

    73 parts1
  • 4 layers35.6 × 22.9 mmActive Notch Filter Cigar Box Electric Guitar, the printed circuit board in 3D

    Active Notch Filter Cigar Box Electric Guitar

    ardaanbhatia7/Active-Notch-Filter-Cigar-Box-Electric-Guitar

    A complete analog hardware project that designs, simulates, and demonstrates an active notch filter for removing unwanted frequency content in a cigar box electric guitar signal path.

    24 parts
  • 2 layers71.9 × 100 mmVco, the printed circuit board in 3D

    Vco

    cookiemonsternz/Eurorack-VCO

    Also, a lot of eurorack modules are quite bland in terms of design, often lacking any personality and focusing purely on cramming as many knobs in as possible.

    115 parts
  • 2 layers41.1 × 55.2 mmTemperature sensor, the printed circuit board in 3D

    Temperature sensor

    Knnthiti/LM35DZ_Temperature_sensor

    โปรเจกต์นี้เป็นการออกแบบและสร้างวงจรปรับแต่งสัญญาณ (Signal Conditioning) เพื่อแปลงแรงดันจากเซนเซอร์ LM35 ให้เหมาะสมกับ ADC ของ Microcontroller โดยค่าที่ได้จากการทดลองอยู่ในช่วงประมาณ 0.218V – 0.507V และแปลงเป็นค่า ADC…

    41 parts
  • 2 layers67.6 × 63.8 mmOutAna, the printed circuit board in 3D

    OutAna

    radioelf/OpenPlc

    Hardware for OpenPLC with raspberry PI Z and Mod. software OpenPlc

    92 parts7

Questions

How big is the Distribution amp for singapore dude PCB?

It measures 45 × 42.8 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Distribution amp for singapore dude use?

58 parts, built around the TC7660M/TR, STCM11+ and TYPE-C16PIN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Distribution amp for singapore dude KiCad files?

From the FilipCichowski/4-channel-distribution-amplifier repository on GitHub, at the commit this page was made from: the board is distribution_amp_for_singapore_dude.kicad_pcb and its schematic distribution_amp_for_singapore_dude.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Distribution amp for singapore dude design in my own project?

Its repository states no licence, so its author keeps all rights: ask FilipCichowski before reusing the design.