

Lora nano
Lora Radio
- Size
- 79.3 × 52 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 54
- Nets
- 51
- Pads
- 170
- Tracks, vias
- 302, 30
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 11 Dec 2022
- Updated
- 28 Jan 2023
Overview
Lora nano is an open-source printed circuit board by radioelf, from the radioelf/Lora repository on GitHub. It is a 2-layer board of 79.3 × 52 mm with 54 parts on 51 nets, routed with 302 tracks and 30 vias.
It is built around the ULN2803A, BAV199 and BSS138, with the STPS1L30A among its other parts. Its parts include 18 resistors, 10 diodes, 4 capacitors, 4 transistors and 4 connectors. It belongs with the radio and wireless boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
4ULN2803A
SOP-18-300mil-40℃~+85℃ 0.93mA 100uA 15pF 20uA 30V 500mA 50V 8 SOP-18-300mil Darlington Transistor Arrays ROHSUMWDarlington Transistor ArraysBAV199
SOT-231 Pair Series Connection 1.25V@150mA 160mA 4A 5nA@75V 85V SOT-23 Diodes - General Purpose ROHSNexperiaDiodes - General PurposeBSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETsSTPS1L30A
SMA(DO-214AC)1 Independent 1A 200uA@30V 30V 395mV@1A 75A SMA(DO-214AC) Schottky Diodes ROHSSTMicroelectronicsSchottky Diodes
README
README.mdLora
Lora Radio Molule E220 https://www.ebyte.com/en/product-view-news.html?id=1207
Creative Commons License DisclaimerUNLESS OTHERWISE MUTUALLY AGREED TO BY THE PARTIES AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY STATUTORY OR OTHERWISE, INCLUDING, WITHOUT LIMITAT FITNESS FOR A PARTICULAR PURPOSE, NONINFRINGEMENT, ACCURACY, OR THE PRESENCE OF ABSENCE OF ERRORS, WH DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES, EXCEPT TO THE EXTENT REQUIRED BY APPLICABLE LAW, I ON ANY LEGAL THEORY FOR ANY SPECIAL, INCIDENTAL, C ARISING OUT OF THIS LICENSE OR THE USE OF THE WORK POSSIBILITY OF SUCH DAMAGES.
Parts
54| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 10K | Resistor_SMD:R_0805_2012Metric | R5, R6, R7, R8, R9, R10, R11, R12 |
| 8 | BAV199 | Package_TO_SOT_SMD:SOT-23 | D8, D9, D10, D11, D12, D13, D14, D15 |
| 4 | 22K | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4 |
| 4 | 300 | Resistor_SMD:R_0805_2012Metric | R15, R16, R17, R18 |
| 4 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4 |
| 4 | Pin_D0.7mm_L6.5mm_W1.8mm_FlatFork | Connector_Pin:Pin_D0.7mm_L6.5mm_W1.8mm_FlatFork | +5V, GND, SCL, SDA |
| 3 | Pin_D1.0mm_L10.0mm | Connector_Pin:Pin_D1.0mm_L10.0mm | GND, RXD, TXD |
| 2 | 100nF | Capacitor_SMD:C_0805_2012Metric | C1, C4 |
| 2 | STPS1L30A | Diode_SMD:D_2010_5025Metric_Pad1.52x2.65mm_HandSolder | D5, D6 |
| 1 | 100K 1% | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R13 |
| 1 | 220K 1% | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R14 |
| 1 | 220uF | Capacitor_SMD:CP_Elec_5x5.9 | C3 |
| 1 | 220uF | Capacitor_SMD:CP_Elec_8x6.2 | C2 |
| 1 | ADC | Connector_Phoenix_MC:PhoenixContact_MCV_1,5_5-G-3.5_1x05_P3.50mm_Vertical | J2 |
| 1 | Arduino_Nano | Module:Arduino_Nano | A1 |
| 1 | E220-868T22D | Module:E32-xxxT20D-E220 | U1 |
| 1 | Input | Connector_Phoenix_MC:PhoenixContact_MCV_1,5_5-G-3.5_1x05_P3.50mm_Vertical | J1 |
| 1 | Output | Connector_Phoenix_MC:PhoenixContact_MCV_1,5_5-G-3.5_1x05_P3.50mm_Vertical | J3 |
| 1 | Power | Connector_Phoenix_MC_HighVoltage:PhoenixContact_MCV_1,5_3-G-5.08_1x03_P5.08mm_Vertical | J4 |
| 1 | ULN2803A | Package_SO:SOIC-18W_7.5x11.6mm_P1.27mm | U2 |
The 50 most common of 54 parts.
More from radioelf/Lora
1- 2 layers87.9 × 65.1 mm

Similar boards
- 2 layers129.5 × 72.6 mm

- 4 layers100 × 100 mm

- 4 layers43 × 66 mm

- 2 layers80 × 51.4 mm

P44ttngw
plan44/p44ttngw-hardware
KiCAD files for TTN LoRA gateway based on RAK831 and Omega2S
78 parts4 - 2 layers50 × 50 mm

Ro system
oxfordfish/STM32G0F6Px-ROC
A reverse osmosis controller system designed around STM32.
57 parts1CERN-OHL-P-2.0 - 2 layers102 × 84 mm

RelayCard
chapppy/Board-for-Relay-Card
Design of schematic and PCB for Relay Card control over USB and CAN based on STM32
81 partsGPL-3.0 - 2 layers65 × 30 mm

Eink NFC
MateuszKozaczek/eink-NFC-PCB
This is PCB project of smart tag for master's degree diploma project
43 parts - 2 layers63.3 × 63.1 mm

Nano drone
radioelf/nano_Drone_ESP32
Small drone with ESP32 to experiment with this https://github.com/rtlopez/esp-fc
59 parts
Questions
How big is the Lora nano PCB?
It measures 79.3 × 52 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Lora nano use?
54 parts, built around the ULN2803A, BAV199, BSS138 and STPS1L30A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Lora nano KiCad files?
From the radioelf/Lora repository on GitHub, at the commit this page was made from: the board is Hard/Lora_nano/lora-nano.kicad_pcb and its schematic Hard/Lora_nano/lora-nano.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Lora nano design in my own project?
Its repository states no licence, so its author keeps all rights: ask radioelf before reusing the design.