

Vu meter processor
Physical VU meter for use with rack audio equipment
- Size
- 53 × 69 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 54
- Nets
- 58
- Pads
- 161
- Tracks, vias
- 179, 4
- Pours
- 37
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 18 Jun 2025
- Updated
- 3 Jul 2025
Overview
Vu meter processor is an open-source printed circuit board by radioegor146, from the radioegor146/vu-meter repository on GitHub. It is a 2-layer board of 53 × 69 mm with 54 parts on 58 nets, routed with 179 tracks and 4 vias.
It is built around the CH32X035F7P6, DPU01L-15 and LM2904. Its parts include 17 capacitors, 16 resistors, 7 connectors, 4 ICs and 2 diodes. It belongs with the audio and music boards of this library.
Main components
3CH32X035F7P6
TSSOP-20TSSOP-20 Microcontrollers (MCU/MPU/SOC) ROHSWCH (Nanjing Qinheng Microelectronics)Microcontrollers (MCU/MPU/SOC)DPU01L-15
SIP-6SIP-6 Power Module/Power Supply ROHSMWPower Supply Module,Power SuppliesLM2904
SOP-8-15V~-1.5V、1.5V~15V 0℃~+70℃ 1MHz 2 2mV 3V~30V 3nA 40mA 45nA 500uA 85dB SOP-8 Operational Amplifier ROHSGOODWORKOperational Amplifier
README
README.mdvu-meter
Physical VU meter for use with rack audio equipment
Consists of:
- 1 processor board
- 4 indicator boards (2 boards per channel)
Processor board
The processor board is a simple board with converter from balanced input to unbalanced with 2 x CH32X035F7P6 MCU to convert from analog domain to digital for output to SPI for shift registers.
Indicator board
This board consists of 5 74HC595D shift registers for 35 individual LEDs.
Parts
54| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 13.3k | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4, R7, R8, R9, R10 |
| 6 | 0.1u | Capacitor_SMD:C_0805_2012Metric | C11, C15, C16, C21, C23, C24 |
| 4 | 10 | Capacitor_SMD:C_0805_2012Metric | C3, C4, C8, C9 |
| 4 | 20k | Resistor_SMD:R_0805_2012Metric | R5, R6, R11, R12 |
| 4 | 47 | Capacitor_SMD:C_0805_2012Metric | C1, C2, C6, C7 |
| 4 | ? | Resistor_SMD:R_0805_2012Metric | R16, R17, R21, R22 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad_TopOnly | H1, H2, H3, H4 |
| 2 | 47u | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C17, C18 |
| 2 | 5.1V | Diode_SMD:D_MiniMELF | D9, D12 |
| 2 | ? | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV1, RV2 |
| 2 | CH32X035F7P6 | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U3, U5 |
| 1 | +5V | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J4 |
| 1 | 220u | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C19 |
| 1 | DPU01L-15 | Custom_Symbols:DPU01L-15 | U4 |
| 1 | L | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J2 |
| 1 | LM2904 | Package_SO:SOP-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | R | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J3 |
| 1 | SPI L | Connector_JST:JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J1 |
| 1 | SPI R | Connector_JST:JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J5 |
| 1 | SWD L | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | SWD R | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J7 |
The 52 most common of 54 parts.
More from radioegor146/vu-meter
1- 2 layers209.5 × 29.3 mm

Similar boards
- 2 layers81 × 73 mm

BalancedAudioBox
samo4/BalancedAudioBox
USB connected balanced +4dBu DAC. Also USB powered. Allegedly 192kHz/24bit.
65 parts1 - 2 layers101.6 × 90.1 mm

Ch32x035f7p6 micro devboard panelized
esehehelp/ch32x035f7p6-micro-devboard
micro devboard for ch32x035
255 parts1MIT - 2 layers85.6 × 54 mm

Business Card v2
SattiDaBeaver/Business_Card_v2
RISC-V supercluster PCB business card with 1 master + 8 worker MCUs over a shared UART bus, USB-C edge connector
183 parts1 - 2 layers95 × 30 mm

Tsubaki lite
ametou/tsubaki_lite
4key+knob ortholinear osu! keyboard w/ individual LED, powered by CH32X035. With reference to https://github.com/rgoulter/keyboard-labs
39 partsCERN-OHL-W-2.0 - 2 layers

Key
kannakanna1/key
key.kicadsch の 4 行 × 3 列スイッチを読み取り、USB HID Boot Keyboard として入力するファームウェアです。CDC シリアルも複合デバイスのまま残し、参照実装と同じ 1200 bps touch → BootROM 書き込みを使用します。スケッチは firmware/keypad/keypad.ino、ボードパッケージは hardware/key/ch32x035f7p6/ です。
40 parts - 2 layers63.5 × 63.5 mm

Main pcb
peterkrull/quad
Firmware, hardware and documentation for my autonomous quad copter project
45 parts210GPL-3.0 - 4 layers100 × 100 mm

DAC ADC PWM IO
DanielMartensson/STM32-PLC
STM32 microcontroller with lots of periferials such as ADC, differential ADC, Input Capture, PWM, USB, Encoder, DAC, Digital Input, RTC, CAN-bus + Alarm etc.
270 parts183MIT - 2 layers133 × 98 mm

Precharge
michaelruppe/FSAE
Projects for Formula SAE Electric Vehicle competition (Australia 2019/2020)
121 parts59MIT
Questions
How big is the Vu meter processor PCB?
It measures 53 × 69 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Vu meter processor use?
54 parts, built around the CH32X035F7P6, DPU01L-15 and LM2904. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Vu meter processor KiCad files?
From the radioegor146/vu-meter repository on GitHub, at the commit this page was made from: the board is vu-meter-processor/vu-meter-processor.kicad_pcb and its schematic vu-meter-indicator/vu-meter-indicator.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Vu meter processor design in my own project?
Its repository states no licence, so its author keeps all rights: ask radioegor146 before reusing the design.