
Ch32x035f7p6 micro devboard panelized
esehehelp/ch32x035f7p6-micro-devboard
micro devboard for ch32x035

4key+knob ortholinear osu! keyboard w/ individual LED, powered by CH32X035. With reference to https://github.com/rgoulter/keyboard-labs
Tsubaki lite is an open-source printed circuit board by ametou, from the ametou/tsubaki_lite repository on GitHub, published under the CERN-OHL-W-2.0 licence. It is a 2-layer board of 95 × 30 mm with 39 parts on 38 nets, routed with 204 tracks and 63 vias.
It is built around the CH32X035F7P6, USBLC6-2SC6 and EC12E1240406. Its parts include 5 resistors, 3 capacitors, 3 connectors, 3 switches and 2 ICs. It belongs with the keyboards and input boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 1N4148 | Diode_SMD:D_SOD-123 | D_1_1, D_1_2, D_1_3, D_1_4, D_1_5, D_1_6 |
| 4 | 560R | Resistor_SMD:R_0402_1005Metric | R_1_1, R_1_2, R_1_3, R_1_4 |
| 4 | LED_Small | LED_SMD:LED_0805_2012Metric | L_1_1, L_1_2, L_1_3, L_1_4 |
| 4 | MX-compatible | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW_1_1, SW_1_2, SW_1_3, SW_1_4 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2_DIN965 | H1, H2, H3, H4 |
| 3 | 10K | Resistor_SMD:R_0805_2012Metric | R1, R5, R16 |
| 2 | 100n | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric | R2, R3 |
| 2 | SW_SPST | Button_Switch_SMD:SW_SPST_B3U-1000P | SW1, SW2 |
| 1 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | CH32X035F7P6 | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U1 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | EC12E1240406 | local:SW-TH_EC12E1240406 | SW3 |
| 1 | LED | LED_SMD:LED_1206_3216Metric | D1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |

esehehelp/ch32x035f7p6-micro-devboard
micro devboard for ch32x035

SattiDaBeaver/Business_Card_v2
RISC-V supercluster PCB business card with 1 master + 8 worker MCUs over a shared UART bus, USB-C edge connector

kannakanna1/key
key.kicadsch の 4 行 × 3 列スイッチを読み取り、USB HID Boot Keyboard として入力するファームウェアです。CDC シリアルも複合デバイスのまま残し、参照実装と同じ 1200 bps touch → BootROM 書き込みを使用します。スケッチは firmware/keypad/keypad.ino、ボードパッケージは hardware/key/ch32x035f7p6/ です。




TalismanDesign/PocketMage_PDA
An E-Ink PDA device using the ESP32 S3.

It measures 95 × 30 mm and has 2 copper layers, 1.6 mm thick.
39 parts, built around the CH32X035F7P6, USBLC6-2SC6 and EC12E1240406. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ametou/tsubaki_lite repository on GitHub, at the commit this page was made from: the board is tsubaki_lite.kicad_pcb and its schematic tsubaki_lite.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-W-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).