

Chatter charger
A LiIon/LiFePo/NiMH Charger Backpack for the CircuitMess Chatter v2
- Size
- 54 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 30
- Nets
- 22
- Pads
- 153
- Tracks, vias
- 205, 11
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 26 Oct 2024
- Updated
- 26 Oct 2024
Overview
Chatter charger is an open-source printed circuit board by Racer159, from the Racer159/chatter-charger repository on GitHub. It is a 2-layer board of 54 × 100 mm with 30 parts on 22 nets, routed with 205 tracks and 11 vias.
It is built around the TPS61200DRC, BQ25171-Q1 and BK-18650-PC4. Its parts include 11 resistors, 6 connectors, 5 capacitors, 3 diodes and 2 ICs. It belongs with the power boards of this library.
Main components
3TPS61200DRC
VSON-10-EP(3x3)-40℃~+125℃@(TJ) 1 1.65MHz 1.8V~5.5V 300mV~5.5V Adjustable Boost Boost Built-in Yes VSON-10-EP(3x3) DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersBQ25171-Q1
UncategorisedTexas InstrumentsBK-18650-PC4
插件插件 Button And Strip Battery Connector ROHSMPDButton And Strip Battery Connector
README
README.mdchatter-charger
[!CAUTION] This repository is still very WIP.
Parts
30| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10kΩ | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7, R8, R9 |
| 3 | 1μF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C4 |
| 2 | 18kΩ | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R5 |
| 2 | 82kΩ | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R4 |
| 2 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2 |
| 1 | 180kΩ | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11 |
| 1 | 22μF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5 |
| 1 | 22μH | Inductor_SMD:L_0805_2012Metric_Pad1.05x1.20mm_HandSolder | L1 |
| 1 | 2MΩ | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10 |
| 1 | 4.7kΩ | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 4.7μF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 1 | 600Ω | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6 |
| 1 | BAT | Connector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J1 |
| 1 | BK-18650-PC4 | BK-18650-PC4:BAT_BK-18650-PC4 | BT1 |
| 1 | BQ25171-Q1 | Package_SON:Texas_S-PVSON-N10_ThermalVias | U1 |
| 1 | Chem Timer Select | Connector_PinHeader_2.00mm:PinHeader_2x03_P2.00mm_Vertical_SMD | J3 |
| 1 | D_Schottky | Diode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3 |
| 1 | LOAD | Connector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J2 |
| 1 | LiFePO or LiIon/NiMH Select | Connector_PinHeader_2.00mm:PinHeader_2x02_P2.00mm_Vertical_SMD | J4 |
| 1 | PMOS | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q1 |
| 1 | THERM | Connector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J5 |
| 1 | TPS61200DRC | Package_SON:Texas_S-PVSON-N10_ThermalVias | U2 |
| 1 | USB TAP | chatter-usb-tap:Chatter_USB_Tap | J6 |
Similar boards
- 2 layers56.9 × 51.1 mm

- 2 layers103.5 × 41.4 mm

- 2 layers80 × 80 mm

Kubisat power v2
gredzikk/kubisat
Hardware and software of cubesat model for engineering thesis
82 parts2MIT - 2 layers204 × 78 mm

- 2 layers83 × 83 mm

- 4 layers88 × 94.5 mm

InspireFly EPS
inspireFly-VT/inspireFly-EPS
inspireFly's custom EPS made for development of an open CubeSat architecture.
123 parts - 4 layers101.6 × 101.6 mm

Simple Polaroid Trigger
JWehle/polaroid-trigger
Automated trigger board for a polaroid SX-70 type camera.
80 partsApache-2.0 - 2 layers100 × 150 mm

Perancangan
komprinat/Smart-voice-assistant-with-Gemini-AI-using-ESP32
My final project for getting a diploma in Politeknik Negeri Padang
13 parts
Questions
How big is the Chatter charger PCB?
It measures 54 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Chatter charger use?
30 parts, built around the TPS61200DRC, BQ25171-Q1 and BK-18650-PC4. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Chatter charger KiCad files?
From the Racer159/chatter-charger repository on GitHub, at the commit this page was made from: the board is chatter-charger.kicad_pcb and its schematic chatter-charger.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Chatter charger design in my own project?
Its repository states no licence, so its author keeps all rights: ask Racer159 before reusing the design.