

PCB EPS 1 CIMA
- Size
- 83 × 83 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 8
- Nets
- 44
- Pads
- 62
- Tracks, vias
- 60, 5
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 21 Aug 2026
- Updated
- 21 Aug 2026
Overview
PCB EPS 1 CIMA is an open-source printed circuit board by GamaCubeDesign, from the GamaCubeDesign/pcbsGCD26 repository on GitHub. It is a 2-layer board of 83 × 83 mm with 8 parts on 44 nets, routed with 60 tracks and 5 vias.
It is built around the DS18B20, BK-18650-PC4 and TIP120. Its parts include 4 resistors, 1 IC, 1 transistor and 1 connector.
Main components
3DS18B20
TO-92-55℃~+125℃ 12bit 3V~5.5V 750ms Single-bus ±0.4℃ TO-92 Temperature Sensors ROHSUMWTemperature SensorsBK-18650-PC4
插件插件 Button And Strip Battery Connector ROHSMPDButton And Strip Battery ConnectorTIP120
TO-220-55℃~+150℃ 200uA 2V@3A,12mA 2W 5A 5V 60V NPN TO-220 Darlington Transistors ROHSJiangsu Changjing Electronics Technology (CJ)Darlington Transistors
README
README.mdpcbsGCD26
Parts
8| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | Heater | Resistor_THT:R_Axial_DIN0922_L20.0mm_D9.0mm_P25.40mm_Horizontal | R1, R2, R3, R4 |
| 1 | BK-18650-PC4 | BK-18650-PC4:BAT_BK-18650-PC4 | BT1 |
| 1 | Conn_02x20_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | J1 |
| 1 | DS18B20 | Package_TO_SOT_THT:TO-92_Inline | U1 |
| 1 | TIP120 | Package_TO_SOT_THT:TO-220-3_Vertical | Q1 |
More from GamaCubeDesign/pcbsGCD26
2- 2 layers65 × 30 mm

- 2 layers83 × 83 mm

Similar boards
- 2 layers103.5 × 41.4 mm

- 2 layers80 × 80 mm

Kubisat power v2
gredzikk/kubisat
Hardware and software of cubesat model for engineering thesis
82 parts2MIT - 2 layers54 × 100 mm

Chatter charger
Racer159/chatter-charger
A LiIon/LiFePo/NiMH Charger Backpack for the CircuitMess Chatter v2
30 parts1 - 2 layers204 × 78 mm

- 4 layers88 × 94.5 mm

InspireFly EPS
inspireFly-VT/inspireFly-EPS
inspireFly's custom EPS made for development of an open CubeSat architecture.
123 parts - 4 layers101.6 × 101.6 mm

Simple Polaroid Trigger
JWehle/polaroid-trigger
Automated trigger board for a polaroid SX-70 type camera.
80 partsApache-2.0 - 2 layers100 × 150 mm

Perancangan
komprinat/Smart-voice-assistant-with-Gemini-AI-using-ESP32
My final project for getting a diploma in Politeknik Negeri Padang
13 parts - 2 layers202.6 × 80 mm

Questions
How big is the PCB EPS 1 CIMA PCB?
It measures 83 × 83 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PCB EPS 1 CIMA use?
8 parts, built around the DS18B20, BK-18650-PC4 and TIP120. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PCB EPS 1 CIMA KiCad files?
From the GamaCubeDesign/pcbsGCD26 repository on GitHub, at the commit this page was made from: the board is PCB_EPS_1_CIMA/PCB_EPS_1_CIMA.kicad_pcb and its schematic PCB_EPS_1_CIMA/PCB_EPS_1_CIMA.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PCB EPS 1 CIMA design in my own project?
Its repository states no licence, so its author keeps all rights: ask GamaCubeDesign before reusing the design.