

Ch32-dev board
Homebrew devkit PCB for the WCH-CH32V203C8T6 MCU
- Size
- 64.7 × 75.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 37
- Nets
- 56
- Pads
- 185
- Tracks, vias
- 401, 34
- Pours
- 138
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 6 Apr 2025
- Updated
- 6 Apr 2025
Overview
Ch32-dev board is an open-source printed circuit board by rabinniroula, from the rabinniroula/CH32V203C8T6-devkit repository on GitHub. It is a 2-layer board of 64.7 × 75.1 mm with 37 parts on 56 nets, routed with 401 tracks and 34 vias.
It is built around the CH32V203C8T6, YTC-TC16S-26 and XL-1608SURC-06. Its parts include 13 capacitors, 8 resistors, 6 connectors, 5 ICs and 3 diodes. It belongs with the microcontroller boards boards and the RISC-V boards of this library.
Main components
3CH32V203C8T6
LQFP-48(7x7)144MHz 64KB FLASH Others LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSWCH (Nanjing Qinheng Microelectronics)Microcontrollers (MCU/MPU/SOC)YTC-TC16S-26
SMD-20℃~+85℃ 1 16P 5,000 times、10,000 cycles 5A 5V 7.3mm Female Surface Mount, Right Angle Type-C SMD USB ConnectorsYIYUANUSB ConnectorsXL-1608SURC-06
0603-40℃~+85℃ 120° 2.3V 20mA 225mcd 50mW 620nm~630nm 625nm Discrete Diode Red Top-mount Water Clear 0603 LED Indication - Discrete ROHSXINGLIGHTLED Indication - Discrete
README
README.mdCH32V203 Devkit Homebrew PCB

docs to follow soon
Parts
37| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 0.1uf | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C6, C7, C8, C9, C10, C11, C12 |
| 5 | 10K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R5, R6, R7, R8 |
| 3 | Conn_01x12_Pin | Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_Vertical | J1, J2, J4 |
| 2 | 12pf | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C3 |
| 2 | 22pf | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C5 |
| 2 | 5.1K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 1 | 10.0 QHHTZB6.3 | USB-A1HSW6:OST_USB-A1HSW6 | USB1 |
| 1 | 10uf | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C13 |
| 1 | 32.768 | easyeda2kicad:CRYSTAL-SMD_L3.2-W1.5-1 | U5 |
| 1 | 330R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4 |
| 1 | 8 MHz | easyeda2kicad:CRYSTAL-SMD_L11.5-W4.8-LS12.7 | X2 |
| 1 | AMS1117-3.3_C5181460 | easyeda2kicad:SOT-223-3_L6.4-W3.5-P2.30-LS7.0-BR | U2 |
| 1 | BLUE | easyeda2kicad:LED0603-RD_RED | LED2 |
| 1 | CH32V203C8T6 | easyeda2kicad:LQFP-48_L7.0-W7.0-P0.50-LS9.0-BL | U1 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J6 |
| 1 | Conn_01x07_Pin | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J3 |
| 1 | Conn_02x02_Counter_Clockwise | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical | J5 |
| 1 | TS4535TP 250GF 009 | easyeda2kicad:SW-SMD_4P-L4.5-W4.5-P3.00-LS6.8 | U4 |
| 1 | XL-1608SURC-06 | easyeda2kicad:LED0603-RD_RED | LED1 |
| 1 | YELLOW | easyeda2kicad:LED0603-RD_RED | LED3 |
| 1 | YTC-TC16S-26 | easyeda2kicad:USB-C-SMD_YTC-TC16S-26-A | U3 |
Similar boards
- 2 layers82 × 58 mm

- 2 layers114.3 × 42.9 mm

- 4 layers114.9 × 129.9 mm

Tanmatsu
Nicolai-Electronics/tanmatsu-hardware
Hardware design of the Tanmatsu mainboard
372 parts9CERN-OHL-P-2.0 - 2 layers96.6 × 100 mm

- 4 layers36.6 × 39.6 mm

RISKYX68000
arkadiuszmakarenko/RISKYX68000
RISKYX68000 Mouse, Keyboard and Gamepad support
32 parts2MIT - 4 layers102.1 × 73.8 mm

Tape Emulator
SteveLRojas/MC-10_Tape_Emulator
Unified HW and SW repository for the TRS-80 MC-10 tape emulator project.
95 parts2 - 4 layers114.9 × 129.9 mm

- 4 layers55 × 85 mm

Questions
How big is the Ch32-dev board PCB?
It measures 64.7 × 75.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ch32-dev board use?
37 parts, built around the CH32V203C8T6, YTC-TC16S-26 and XL-1608SURC-06. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ch32-dev board KiCad files?
From the rabinniroula/CH32V203C8T6-devkit repository on GitHub, at the commit this page was made from: the board is ch32-dev-board.kicad_pcb and its schematic ch32-dev-board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ch32-dev board design in my own project?
Its repository states no licence, so its author keeps all rights: ask rabinniroula before reusing the design.