2 layers68.8 × 53.6 mm
Relatively Universal ROM Programmer
AndersBNielsen/Relatively-Universal-ROM-Programmer
Hardware to program W27C512 EEPROM or any 24/28/32 pin ROM requiring from 5V to 27V programming voltage.
149 parts257GPL-3.0
2 layers66 × 68.6 mm
FP2800A Tester
Qeteshpony/FP2800A-Tester1Arduino Uno compatible shield for testing functionality of a FP2800A
- Size
- 66 × 68.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 99
- Nets
- 87
- Pads
- 280
- Tracks, vias
- 470, 21
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 3 Jul 2023
- Updated
- 29 Aug 2024
Overview
FP2800A Tester is an open-source printed circuit board by Qeteshpony, from the Qeteshpony/FP2800A-Tester repository on GitHub, published under the BSD-2-Clause licence. It is a 2-layer board of 66 × 68.6 mm with 99 parts on 87 nets, routed with 470 tracks and 21 vias.
It is built around the ARDUINO UNO R3. Its parts include 56 diodes, 28 resistors, 1 capacitor, 1 IC and 1 switch. It belongs with the lEDs and displays and microcontroller boards boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdFP2800A-Tester
Arduino Uno compatible shield for testing functionality of a FP2800A
Parts
99| Qty | Value | Footprint | References |
|---|---|---|---|
| 28 | 1k5 | Resistor_SMD:R_0603_1608Metric | R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23, R24 +12 |
| 28 | H | LED_SMD:LED_0603_1608Metric | D1, D3, D11, D13, D15, D17, D19, D21, D23, D25, D27, D29, D31, D33, D35, D37 +12 |
| 28 | L | LED_SMD:LED_0603_1608Metric | D2, D10, D12, D14, D16, D18, D20, D22, D24, D26, D28, D30, D32, D34, D36, D38 +12 |
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | Arduino_UNO_R3 | Module:Arduino_UNO_R3 | A1 |
| 1 | COM | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP1 |
| 1 | FP2800A | Socket:DIP_Socket-40_W11.9_W12.7_W15.24_W17.78_W18.5_3M_240-1280-00-0602J | U1 |
| 1 | LOGO | My_Footprints:CutieMark7.5mmInverted | G*** |
| 1 | Reset | Button_Switch_THT:SW_PUSH_6mm | SW1 |
The 90 most common of 99 parts.
Similar boards
- 2 layers69.1 × 53.8 mm
Motor controller
AlanFord/self-balancing-stick
Dual Axis Reaction Wheel Inverted Pendulum
25 parts79MIT - 2 layers68.6 × 53.3 mm
Protogasm Board V2
Edging-Machines/Edging-Machines
This repository is intended to contain as much information as possible about building, designing, prototyping, and using automated edging machines.
14 parts67MIT - 2 layers53.8 × 69.6 mm
EVSE V2 2
PedroCNeves/AC_ChargingStation
A learning project to create an EV AC Charging station based on an Arduino Uno
32 parts50 - 2 layers113.7 × 61 mm
ArduTester SMD
jonsag/arduTester
An arduino component tester based on https://create.arduino.cc/projecthub/plouc68000/ardutester-v1-13-the-arduino-uno-transistor-tester-dbafb4
17 parts14 - 4 layers65.9 × 52.9 mm
- 4 layers68.6 × 53.3 mm
101 PCB
ICRS/101
The all-new open source Robotics 101 course from ICRS. It's specifically designed to be run in hackspaces, after school clubs and university societies.
89 parts10CC-BY-4.0 - 2 layers53.3 × 68.3 mm
Questions
How big is the FP2800A Tester PCB?
It measures 66 × 68.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the FP2800A Tester use?
99 parts, built around the ARDUINO UNO R3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the FP2800A Tester KiCad files?
From the Qeteshpony/FP2800A-Tester repository on GitHub, at the commit this page was made from: the board is pcb/FP2800A-Tester.kicad_pcb and its schematic pcb/FP2800A-Tester.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the FP2800A Tester design in my own project?
Its repository publishes it under the BSD-2-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).