2 layers117.3 × 54.5 mm
2 layers134.6 × 78.7 mm
Meson
PyrooL/Meson2A split 3x14 keyboard with spacebars on a fourth row. Reversible MX/Alps/Choc support.
- Size
- 134.6 × 78.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 69
- Nets
- 49
- Pads
- 503
- Tracks, vias
- 284, 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 17 Apr 2019
- Updated
- 28 Jul 2019
Overview
Meson is an open-source printed circuit board by PyrooL, from the PyrooL/Meson repository on GitHub, published under the MIT licence. It is a 2-layer board of 134.6 × 78.7 mm with 69 parts on 49 nets, routed with 284 tracks and 1 via.
Its parts include 25 switches, 23 diodes, 3 resistors and 1 IC. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.
README
README.mdMeson
A split 3x14 keyboard with spacebars on a fourth row. Reversible MX//Alps/Choc support.
KiCAD libraries here:
Parts
69| Qty | Value | Footprint | References |
|---|---|---|---|
| 23 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +7 |
| 23 | KEYSW | Keebio-Parts:MX-Alps-Choc-1U-NoLED-Reversible | K1, K2, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K20, K21, K22, K23 +7 |
| 6 | LOGO | silks:pi | G***, G***, G***, G***, G***, G*** |
| 2 | 4.7k | Keebio-Parts:Resistor-Hybrid | R1, R2 |
| 2 | Conn_01x04_Female | Keebio-Parts:TRRS-PJ-320A | TRRS1, TRRS2 |
| 2 | LOGO | silks:gluon | G***, G*** |
| 2 | SW_DPST | random-keyboard-parts:SKQG-1155865 | SW1, SW2 |
| 1 | 10k | Keebio-Parts:Resistor-Hybrid | R3 |
| 1 | Conn_01x03_Female | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | RGB1 |
| 1 | KEYSW | MX_Alps_Hybrid:MX-1U-NoLED-Reversible | Kb22 |
| 1 | ProMicro | Keebio-Parts:ArduinoProMicro | U1 |
The 64 most common of 69 parts.
Questions
How big is the Meson PCB?
It measures 134.6 × 78.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Meson use?
69 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Meson KiCad files?
From the PyrooL/Meson repository on GitHub, at the commit this page was made from: the board is PCB/meson.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Meson design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers100 × 96 mm
Backlight
jackw01/scanlight
A better light source for scanning color negative film
69 parts397CERN-OHL-W-2.0 - 2 layers135.9 × 102.2 mm
Ergo42
Biacco42/Ergo42
7x4 ortho linear split keyboard - The Answer to the Ultimate Question of Life, the Universe, and at least Keyboards
69 parts218 - 2 layers104.1 × 71.1 mm
Minifp
eigenco/frankenpi
This is an experimental project to connect Raspberry Pi with the help of cheap Cyclone IV FPGA board to 8-bit ISA bus to act as multiple different devices.
69 parts139 - 2 layers90 × 140 mm
Drumkid
mattybrad/drumkid
Version 4 was the first successful working design, with full code, schematics, Gerbers, etc available on GitHub.
69 parts137 - 2 layers120 × 60 mm
Overglade Badges
KaiPereira/Overglade-Badges
NFC hackathon badges for the Overglade game jam in Singapore!
69 parts126 - 2 layers142 × 20 mm
DeskController
BerkeleyHCI/PolymorphicBlocks
A Python-based hardware description language for PCBs for higher-level (block-diagram / system-architecture level) PCB design through libraries of directly reusable subcircuit generators.
69 parts94BSD-3-Clause - 2 layers163.1 × 111.9 mm
