
EBS logic SMD
PUT-Motorsport/PUTM_DV_EBS_2022
A KiCad schematic and PCB project of the Emergency Brake System circuit board.

EBS logic SMD is an open-source printed circuit board by PUT-Motorsport, from the PUT-Motorsport/PUTM_DV_EBS_control repository on GitHub. It is a 2-layer board with 15 parts on 61 nets.
It is built around the 74HC00D,653-JSM, 74HC157D,653-JSM and MM74HC74AM, with the SN74HC08D, SN74HC32D and UCC2946PW among its other parts. Its parts include 9 connectors and 6 ICs.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 74HC00D,653 | KiCAD:SOIC127P600X175-14N | U2 |
| 1 | 74HC157D,653 | KiCAD:SOIC127P600X175-16N | U1 |
| 1 | AS_close_SDC | Connector_PinHeader_1.00mm:PinHeader_1x01_P1.00mm_Vertical | J5 |
| 1 | AS_driving_mode | Connector_PinHeader_1.00mm:PinHeader_1x01_P1.00mm_Vertical | J1 |
| 1 | MM74HC74AM | KiCAD:SOIC127P600X175-14N | U3 |
| 1 | SDC_is_ready | Connector_PinHeader_1.00mm:PinHeader_1x01_P1.00mm_Vertical | J8 |
| 1 | SN74HC08D | KiCAD:SOIC127P600X175-14N | IC2 |
| 1 | SN74HC32D | KiCAD:SOIC127P600X175-14N | IC3 |
| 1 | Shutdown_circuit | Connector_PinHeader_1.00mm:PinHeader_1x01_P1.00mm_Vertical | J7 |
| 1 | TS_Activation_Button cockpit | Connector_PinHeader_1.00mm:PinHeader_1x01_P1.00mm_Vertical | J2 |
| 1 | TS_Activation_Button external | Connector_PinHeader_1.00mm:PinHeader_1x01_P1.00mm_Vertical | J3 |
| 1 | To_SDC_relais | Connector_PinHeader_1.00mm:PinHeader_1x01_P1.00mm_Vertical | J9 |
| 1 | UCC2946PW | Package_SO:TSSOP-8_4.4x3mm_P0.65mm | IC1 |
| 1 | VCC | Connector_PinHeader_1.00mm:PinHeader_1x01_P1.00mm_Vertical | J4 |
| 1 | Watchdog | Connector_PinHeader_1.00mm:PinHeader_1x01_P1.00mm_Vertical | J6 |

PUT-Motorsport/PUTM_DV_EBS_2022
A KiCad schematic and PCB project of the Emergency Brake System circuit board.




DD1SB/ARDF-TX
Date: 2026-10-15. Engineering review only; unbuilt and unenergized. Open RF80.kicadpro, schematic and native PCB in KiCad10.0.6. Three primary PCBs and the separate VHF true-AM design are unchanged.

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
15 parts, built around the 74HC00D,653-JSM, 74HC157D,653-JSM, MM74HC74AM and SN74HC08D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the PUT-Motorsport/PUTM_DV_EBS_control repository on GitHub, at the commit this page was made from: the board is EBS_logic_SMD/EBS_logic_SMD.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask PUT-Motorsport before reusing the design.