
Tiny
pengshulin/mcush
MCUSH application platform (personal toolkit: firmware platform, debugger, hardware, test and application framework)

Custom STM32F103C8 development board designed in kicad 9.0, featuring micro USB connector, I2C interface, UART interface and SWD programming interface . Built with proper schematic diagram and layout (2 layer pcb) practices , power integrity, USB pair differential routing.
STM32F10 dev board is an open-source printed circuit board by pushtiujeniya, from the pushtiujeniya/STM32F103CBT6-custom-dev-board repository on GitHub. It is a 2-layer board of 36.4 × 24.3 mm with 29 parts on 50 nets, routed with 218 tracks and 23 vias.
It is built around the STM32F103CBT6 and AMS1117-3.3. Its parts include 14 capacitors, 5 resistors, 4 connectors, 2 ICs and 1 diode. It belongs with the interfaces and adapters and microcontroller boards boards and the STM32 boards of this library.
This project contains custom development board based on the STM32F103 microcontroller.This baord created using kicad 9.0 software with proper routing , signal integrity, differential pair routing of USB connection.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C2, C3, C4, C5, C6 |
| 4 | 1K5 | Resistor_SMD:R_0402_1005Metric | R2, R3, R4, R5 |
| 3 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2, J3, J4 |
| 2 | 10pF | Capacitor_SMD:C_0402_1005Metric | C11, C12 |
| 2 | 1uF | Capacitor_SMD:C_0402_1005Metric | C8, C9 |
| 2 | 22uF | Capacitor_SMD:C_0805_2012Metric | C13, C14 |
| 1 | 100nF | Capacitor_SMD:C_0402_1005Metric | C10 |
| 1 | 10kohm | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 10nF | Capacitor_SMD:C_0402_1005Metric | C7 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 120R | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | Crystal_GND24 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | STM32F103CBT6 | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | SW_SPDT | Button_Switch_SMD:SW_SPDT_PCM12 | SW1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Wuerth_629105150521 | J1 |
| 1 | red led | LED_SMD:LED_0603_1608Metric | D1 |

pengshulin/mcush
MCUSH application platform (personal toolkit: firmware platform, debugger, hardware, test and application framework)

dilshan/usb-external-display
USB 10 digit seven segment display unit

Queens-Rocket-Engineering-Team/Avionics-23-26
QRET Avionics hardware, firmware, and documentation for 2023 to 2025.

akhilveeraghanta/the-bots-mainboard
The main board for the the bots SSL robocup team


Queens-Rocket-Engineering-Team/av-power
QRET Avionics PCBs and firmware for delivering power to SRAD PCBs


It measures 36.4 × 24.3 mm and has 2 copper layers, 1.6 mm thick.
29 parts, built around the STM32F103CBT6 and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the pushtiujeniya/STM32F103CBT6-custom-dev-board repository on GitHub, at the commit this page was made from: the board is STM32F10_dev board.kicad_pcb and its schematic STM32F10_dev board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask pushtiujeniya before reusing the design.