Skip to the content
2 layers25.4 × 9.4 mmLDO-5vTo3.3v, the printed circuit board in 3D

This repository contains some 2 layer of module PCB board schematic and layout files designed using kicad software

Size
25.4 × 9.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
9
Nets
4
Pads
20
Tracks, vias
26, 0
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
16 Mar 2026
Updated
6 Apr 2026

Overview

LDO-5vTo3.3v is an open-source printed circuit board by pushtiujeniya, from the pushtiujeniya/Kicad-Projects repository on GitHub. It is a 2-layer board of 25.4 × 9.4 mm with 9 parts on 4 nets, routed with 26 tracks and 0 vias.

It is built around the AMS1117-3.3. Its parts include 4 capacitors, 2 connectors, 1 resistor, 1 IC and 1 diode.

Main components

1

README

README.md

Kicad-Projects

This repository contains some 2 layer of PCB module board schematic and layout files designed using kicad software

BME280 module board

  • BME280 module measures pressure, temperature humidity, two mode interface one is I2C and other is SPI so in this design BME280 is interfaced by I2C mode.
  • 3.3V DC power supply for operating the board

DAC module board

  • Digital to analog converter using MCP4721 ic
  • pull up resistors for i2c communication protocol SDA and SCL lines
  • decoupling capacitor at ouput voltage
  • decoupling capacitors at input voltage used MLCC and tantalum as it has low ESR
  • 1X5 pin through hole connector to connect the module with controller

LDO voltage regulator

  • AMS1117-3.3V ldo regulator convert 5V DC to 3.3V DC
  • Two 1x02 connector for vin and vout
  • led indication for voltage input with pretected by 1Kohm resistor
  • decoupling capacitor at voltage input and voltage output

DHT11 module

  • This module measures the temperature and humidity value
  • DHT11 sensor (input voltage range 3.3V DC to 5.5V DC)
  • 3 pin header conenctor for vcc, gnd and data line
  • power on led indication with resistor protection

Parts

9
QtyValueFootprintReferences
20.1uFCapacitor_SMD:C_0603_1608MetricC2, C4
210uFCapacitor_SMD:C_0603_1608MetricC1, C3
2Conn_01x02_PinConnector_PinHeader_1.00mm:PinHeader_1x02_P1.00mm_VerticalJ1, J2
11KohmResistor_SMD:R_0603_1608MetricR1
1AMS1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U1
1LEDLED_SMD:LED_0603_1608MetricD1

More from pushtiujeniya/Kicad-Projects

3
  • 2 layers17.9 × 9.5 mmBME280 module, the printed circuit board in 3D

    BME280 module

    pushtiujeniya/Kicad-Projects

    This repository contains some 2 layer of module PCB board schematic and layout files designed using kicad software

    8 parts2
  • 2 layers15.4 × 16.1 mmDAC MCP4725ic, the printed circuit board in 3D

    DAC MCP4725ic

    pushtiujeniya/Kicad-Projects

    This repository contains some 2 layer of module PCB board schematic and layout files designed using kicad software

    7 parts2
  • 2 layers23.9 × 21.5 mmDHT11, the printed circuit board in 3D

    DHT11

    pushtiujeniya/Kicad-Projects

    This repository contains some 2 layer of module PCB board schematic and layout files designed using kicad software

    5 parts2

Similar boards

  • 2 layers290.1 × 130 mmPro V2, the printed circuit board in 3D

    Pro V2

    kata0510/Lily58

    6×4+4keys column-staggered split keyboard.

    312 parts2.3k
  • 2 layers26.2 × 45.5 mmPL18 multiprotocol, the printed circuit board in 3D

    PL18 multiprotocol

    pascallanger/DIY-Multiprotocol-TX-Module

    Multiprotocol TX Module (or MULTI-Module) is a 2.4GHz transmitter module which controls many different receivers and models.

    24 parts1.9kGPL-3.0
  • 4 layers99 × 53.3 mmPSLab, the printed circuit board in 3D

    PSLab

    fossasia/pslab-hardware

    PSLab Hardware Design and Schematics https://pslab.io

    199 parts1.7kApache-2.0
  • 4 layers85 × 56 mmPslab mini, the printed circuit board in 3D

    Pslab mini

    fossasia/pslab-mini-hardware

    PSLab Mini Hardware https://pslab.io

    182 parts1.2kApache-2.0
  • 4 layers100 × 54 mm32Bit shift register, the printed circuit board in 3D

    32Bit shift register

    MaltWhiskey/Mega-Cube

    16x16x16 PL9823 Cube with Teensy 4.0 and FlexIO driver

    64 parts766
  • 2 layers44.2 × 29.3 mmI2c tiny usb, the printed circuit board in 3D

    I2c tiny usb

    harbaum/I2C-Tiny-USB

    Cheap and simple I²C to USB interface

    27 parts454
  • 2 layers78 × 60 mmIce viz, the printed circuit board in 3D

    Ice viz

    muni-works/vcad

    BRep CAD kernel in Rust/WASM

    44 parts442Apache-2.0
  • 2 layers59.1 × 99.9 mmCheap FOCer 2 60mm, the printed circuit board in 3D

    Cheap FOCer 2 60mm

    shamansystems/Cheap-FOCer-2

    Low-Cost Motor Controller based on the VESC 6

    193 parts407

Questions

How big is the LDO-5vTo3.3v PCB?

It measures 25.4 × 9.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the LDO-5vTo3.3v use?

9 parts, built around the AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the LDO-5vTo3.3v KiCad files?

From the pushtiujeniya/Kicad-Projects repository on GitHub, at the commit this page was made from: the board is LDO_AMS1117-3.3/LDO-5vTo3.3v.kicad_pcb and its schematic BME280_ModuleBoard/BME280 module.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the LDO-5vTo3.3v design in my own project?

Its repository states no licence, so its author keeps all rights: ask pushtiujeniya before reusing the design.