
Backplane
PurkkaKoodari/ktane-hw
Fully playable hardware implementation of Keep Talking and Nobody Explodes. Mirror of https://gitlab.com/PurkkaKoodari/ktane-hw

Fully playable hardware implementation of Keep Talking and Nobody Explodes. Mirror of https://gitlab.com/PurkkaKoodari/ktane-hw
Timer is an open-source printed circuit board by PurkkaKoodari, from the PurkkaKoodari/ktane-hw repository on GitHub, published under the MIT licence. It is a 2-layer board of 100 × 100 mm with 22 parts on 65 nets, routed with 211 tracks and 45 vias.
It is built around the HT16K33. Its parts include 9 resistors, 3 diodes, 2 ICs, 2 connectors and 1 capacitor. It belongs with the AVR (ATmega, ATtiny) boards of this library.
This project is a hardware reimplementation of the game Keep Talking and Nobody Explodes. The game runs fully on the physical device and is controlled using a web interface over Wi-Fi. The project will be documented in this repository – expect the links below to be broken for the near future.
(TODO: insert photos here)
The hardware is built around a Raspberry Pi Zero W, which runs the main controller software, attached to a backplane that provides power, connectivity and audio. The game's modules are built as independent devices, usually based on an Arduino Nano, which connect to the backplane using RJ-45 connectors (with a completely nonstandard usage of the pins).
The software can be divided into three parts: the main controller, written in Python 3 using asyncio and websockets; the module software, written in C++ and built using arduino-cli; and the Web interface, written using Preact. In addition, one can run a room server, which supports room-scale audio and DMX lights and other effects.
Unless otherwise noted, all software in this repository is licensed under the MIT license; the hardware design files in hardware/ are licensed under the CERN-OHL-P v2; and the sounds in sounds/ are licensed under CC-BY 3.0 (see sounds/CREDITS.txt for authors).
This project is not in any way related to or endorsed by Steel Crate Games, nor does it include any assets from the original game. If you intend to build a copy of the project, please support them and purchase a copy of the game!
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R5, R6, R7, R8, R9 |
| 2 | 4K7 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R3, R4 |
| 2 | 560R | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R2 |
| 2 | LED_Small | LED_THT:LED_D3.0mm | D1, D2 |
| 1 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1 |
| 1 | 8402BS | ProjectDisplays:8402BS | D3 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | Conn_01x03_Female | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J2 |
| 1 | HT16K33 | Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm | U2 |
| 1 | RJ45_Shielded | RJ45_5224:RJ45_5224 | J1 |
| 1 | WAVGAT_CAN | WAVGAT_CAN:WAVGAT_CAN | U1 |
The 18 most common of 22 parts.

PurkkaKoodari/ktane-hw
Fully playable hardware implementation of Keep Talking and Nobody Explodes. Mirror of https://gitlab.com/PurkkaKoodari/ktane-hw

PurkkaKoodari/ktane-hw
Fully playable hardware implementation of Keep Talking and Nobody Explodes. Mirror of https://gitlab.com/PurkkaKoodari/ktane-hw

PurkkaKoodari/ktane-hw
Fully playable hardware implementation of Keep Talking and Nobody Explodes. Mirror of https://gitlab.com/PurkkaKoodari/ktane-hw

PurkkaKoodari/ktane-hw
Fully playable hardware implementation of Keep Talking and Nobody Explodes. Mirror of https://gitlab.com/PurkkaKoodari/ktane-hw

PurkkaKoodari/ktane-hw
Fully playable hardware implementation of Keep Talking and Nobody Explodes. Mirror of https://gitlab.com/PurkkaKoodari/ktane-hw

PurkkaKoodari/ktane-hw
Fully playable hardware implementation of Keep Talking and Nobody Explodes. Mirror of https://gitlab.com/PurkkaKoodari/ktane-hw

PCBench/PCBench
resolution = [0.5, 0.5] pcbfolder = '../PCBs/' pcbnames = ["1Bitsy1bitsy"] iters = 30 env = PCBRoutingEnv(resolution=resolution, pcbfolder=pcbfolder, pcbnames=pcbnames) obs, info = env.reset() for in range(iters): act =…






Pesc0/Clock
A digital clock with a 7 segment display, attiny85, DS3231 and a lot of cool features

VoltMusic/OB-SX-Programmer-and-Interface
This contains the Arduino code and KiCAD project file for creating a OB-SX Programmer and Interface.
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
22 parts, built around the HT16K33. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the PurkkaKoodari/ktane-hw repository on GitHub, at the commit this page was made from: the board is hardware/timer/timer.kicad_pcb and its schematic hardware/backplane/backplane.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).