
Ltp kikad
ADDTDR/Pitanga
Prototype 0.01 | Pitanga V1 | Pitanga V2.1a :-------------------------:|:-------------------------:|:-------------------------: | |

Jhl synth0 is an open-source printed circuit board by koyoi, from the koyoi/jhl_synth0_pcb repository on GitHub. It is a 4-layer board of 100 × 100 mm with 218 parts on 154 nets, routed with 1,631 tracks and 153 vias.
It is built around the HT16K33, PCA9306D and PCA9306DC, with the PCA9306DP among its other parts. Its parts include 101 diodes, 52 connectors, 20 switches, 13 resistors and 7 ICs.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 100 | LED_Small_Filled | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D100 +84 |
| 24 | Conn_01x01 | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | J1, J11, J12, J13, J14, J15, J16, J17, J19, J21, J22, J23, J24, J25, J26, J28 +8 |
| 10 | R_Potentiometer | Potentiometer_THT:Potentiometer_Vishay_T73YP_Vertical | RV1, RV3, RV5, RV7, RV9, RV11, RV13, RV15, RV17, RV19 |
| 10 | R_Potentiometer | Potentiometer_THT:Potentiometer_Vishay_T93YA_Vertical | RV2, RV4, RV6, RV8, RV10, RV12, RV14, RV16, RV18, RV20 |
| 10 | SW_SPST | Button_Switch_SMD:SW_Push_1P1T_XKB_TS-1187A | SW1, SW3, SW5, SW7, SW9, SW11, SW13, SW15, SW17, SW19 |
| 10 | SW_SPST | Button_Switch_THT:SW_TH_Tactile_Omron_B3F-100x | SW2, SW4, SW6, SW8, SW10, SW12, SW14, SW16, SW18, SW20 |
| 9 | 200k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R5, R6, R7, R8, R9, R10, R11, R12, R13 |
| 8 | Conn_01x04 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J7, J8, J9, J10, J18, J27, J35, J52 |
| 6 | Conn_01x20 | Connector_PinSocket_2.54mm:PinSocket_1x20_P2.54mm_Vertical | J31, J32, J33, J37, J38, J39 |
| 4 | 1k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1, R2, R3, R4 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_2x01_P2.54mm_Vertical | J36, J40, J49 |
| 3 | Conn_01x08 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J5, J6, J51 |
| 3 | SA39-12SRWA | Display_7Segment:Sx39-1xxxxx | U3, U4, U7 |
| 2 | Conn_01x08 | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J42, J43 |
| 2 | Conn_01x10 | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J41, J44 |
| 2 | Conn_02x05_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J20, J30 |
| 1 | 0.1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 1 | Conn_02x08_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_Vertical | J53 |
| 1 | HT16K33 | libs:HT16K33 | IC1 |
| 1 | PCA9306D | Package_SO:SO-8_3.9x4.9mm_P1.27mm | U8 |
| 1 | PCA9306DC | Package_SO:VSSOP-8_2.3x2mm_P0.5mm | U5 |
| 1 | PCA9306DP | Package_SO:TSSOP-8_3x3mm_P0.65mm | U6 |
| 1 | USB_B_Micro | libs:usb b micro jhl | J2 |
| 1 | ~ | libs:BU5004 | D101 |

ADDTDR/Pitanga
Prototype 0.01 | Pitanga V1 | Pitanga V2.1a :-------------------------:|:-------------------------:|:-------------------------: | |

BasementCircuits/BulletTime
ESP32 based clock using LTP305 led matrices

antoinevg/tiliqua
A powerful, hackable FPGA-based audio multitool for Eurorack.

harrymander/fph-snippets-github
C project for Atmel (Microchip) ATSAM4S16B using Freertos. Modules of interest:

INSA-GEI/gei-nxpcup-4w-pwr
Power part for 4 wheels model car used in NXPCUP contest at INSA-GEI

mlab-modules/OLED01
OLED module with SSD1306 controller, I2C interface level shifter, integrated buzzer, touchscreen, and LEDs.

oomlout/oomlout_oomp_project_bot_v_2

chipsalliance/rocket-pcb
PCB libraries and templates for rocket-chip based FPGA/ASIC designs
It measures 100 × 100 mm and has 4 copper layers, 1.6 mm thick.
218 parts, built around the HT16K33, PCA9306D, PCA9306DC and PCA9306DP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the koyoi/jhl_synth0_pcb repository on GitHub, at the commit this page was made from: the board is jhl_synth0.kicad_pcb and its schematic conns.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask koyoi before reusing the design.