2 layers65 × 30 mm
TinyNumber
ADDTDR/Pitanga
Prototype 0.01 | Pitanga V1 | Pitanga V2.1a :-------------------------:|:-------------------------:|:-------------------------: | |
9 parts4MIT
2 layers65 × 56.5 mm
Ltp kikad
ADDTDR/Pitanga4Prototype 0.01 | Pitanga V1 | Pitanga V2.1a :-------------------------:|:-------------------------:|:-------------------------: | |
- Size
- 65 × 56.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 54
- Nets
- 96
- Pads
- 286
- Tracks, vias
- 702, 74
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 13 Jul 2023
- Updated
- 12 Feb 2025
Overview
Ltp kikad is an open-source printed circuit board by ADDTDR, from the ADDTDR/Pitanga repository on GitHub, published under the MIT licence. It is a 2-layer board of 65 × 56.5 mm with 54 parts on 96 nets, routed with 702 tracks and 74 vias.
It is built around the PCA9306DP, LTP-305G and SM04B-SRSS-TB(LF)(SN). Its parts include 16 resistors, 12 capacitors, 5 switches, 3 ICs and 3 diodes.
Main components
3
PCA9306DP
TSSOP-8-40℃~+85℃ 1 1.8V~5.5V 1V~3.6V 2 2Mbps Automatic direction detection、Output enable high-impedance Bidirectional Level translator Open-drain SMBus、I2C TSSOP-8 Translators, Level Shifters ROHSNXP SemiconductorsTranslators, Level Shifters
LTP-305G
THroughholeTHroughhole New Arrivals ROHSLite-OnUncategorised
SM04B-SRSS-TB(LF)(SN)
SMD,P=1mm,卧贴-25℃~+85℃ 1 1A 1mm 1x4P 2.9mm 4 4.32mm 4P 50V 6mm Auxiliary Solder Pin Copper alloy PA SH Surface Mount, Right Angle Tin UL94V-0 White SMD,P=1mm,卧贴 Wire To Board Connector ROHSJSTWire To Board Connector
README
README.mdPitanga Project
| Prototype 0.01 | Pitanga V1 | Pitanga V2.1a |
|---|---|---|
 |  |  |
3D
Parts
54| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 47k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R13 |
| 6 | LTP-305G | Library:DIPS762W50P254L1850H400Q14N | DS1, DS2, DS3, DS4, DS5, DS6 |
| 5 | SW_Omron_B3FS | Button_Switch_SMD:SW_SPST_Omron_B3FS-105xP | SW1, SW2, SW3, SW4, SW5 |
| 4 | RPi_Hat:RPi_Hat_Mounting_Hole | , , , | |
| 4 | 15uF | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C1, C2, C6, C7 |
| 3 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C8, C11, C12 |
| 3 | 10uF | Capacitor_SMD:C_0603_1608Metric | C4, C9, C10 |
| 3 | 1N4148 | Diode_SMD:D_0805_2012Metric | D1, D2, D3 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C5 |
| 2 | LOGO | LOGO | G***, G*** |
| 2 | SM04B-SRSS-TB(LF)(SN) | ltp_kikad:JST_SM04B-SRSS-TB(LF)(SN) | J2, J3 |
| 2 | SamacSys_Parts_HT16K33-28SOP | Holtek:SOIC127P1031X264-28N | IC2, locked |
| 2 | i2c | Resistor_SMD:R_0603_1608Metric | R17, R18 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R15 |
| 1 | 200k | Resistor_SMD:R_0603_1608Metric | R16 |
| 1 | PCA9306DP | Package_SO:TSSOP-8_3x3mm_P0.65mm | U1 |
| 1 | RPi_GPIO | LTP-305G:Pin_Header_Straight_2x20 | J1 |
More from ADDTDR/Pitanga
1Similar boards
- 2 layers125 × 70 mm
LTP305 ESP32 CLOCK
BasementCircuits/BulletTime
ESP32 based clock using LTP305 led matrices
65 parts4MIT - 2 layers22.7 × 20.6 mm
UMatrix
PStinno/micro-matrix-pcb
Small pcb design enabling control of an onboard LED matrix over I2C.
16 partsCC-BY-SA-4.0 - 2 layers
LowPowerLEDSmartWatch
StevenKnudsen/LowPowerLEDSmartWatch
A nRF5x-based watch with dot LED display and optimized power management
12 partsMIT - 2 layers11.5 × 26.2 mm
Ch32 led
kingovchouffe/clk_led_matrix
This repository contains KiCad hardware designs for a GNSS-oriented clock and LED matrix display. The primary design combines an STM32C0-series controller with an ATGM336H GNSS receiver; separate files capture a…
8 parts - 4 layers31.7 × 110 mm
Tiliqua motherboard
antoinevg/tiliqua
A powerful, hackable FPGA-based audio multitool for Eurorack.
134 partsCERN-OHL-S-2.0 - 4 layers100 × 115 mm
Instrumentation v3
harrymander/fph-snippets-github
C project for Atmel (Microchip) ATSAM4S16B using Freertos. Modules of interest:
157 parts - 4 layers124 × 62 mm
Carte puissance
INSA-GEI/gei-nxpcup-4w-pwr
Power part for 4 wheels model car used in NXPCUP contest at INSA-GEI
110 partsMIT - 4 layers100 × 100 mm
Questions
How big is the Ltp kikad PCB?
It measures 65 × 56.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ltp kikad use?
54 parts, built around the PCA9306DP, LTP-305G and SM04B-SRSS-TB(LF)(SN). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ltp kikad KiCad files?
From the ADDTDR/Pitanga repository on GitHub, at the commit this page was made from: the board is Hardware_Kicad/ltp_kikad.kicad_pcb and its schematic Hardware_Kicad/TinyNumber/TinyNumber.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ltp kikad design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).