Skip to the content
PAD1PAD2PAD3PAD4PAD5PAD7PAD8PAD9

LTP-305G

Lite-OnExtended

THroughhole New Arrivals ROHS

Part id
lite-on/LTP-305G
Category
Uncategorised
Package
THroughhole
Pins
14
In stock
0 at JLCPCB (C7431212)
Used on
5 open-source boards

Overview

The LTP-305G is an uncategorised made by Lite-On in a THroughhole package with 13 pins. THroughhole New Arrivals ROHS.

PCBKit's library has its KiCad symbol (pimoroni-optoelectronics:LTP-305, from Eagle libraries) and its footprint (pimoroni-optoelectronics:LTP-305, from Eagle libraries), ready for a KiCad board. JLCPCB lists it (part C7431212). 5 open-source boards in 5 repositories on GitHub use it.

Symbol

PAD5C1PAD1C2PAD8C3PAD14C4PAD13C5PAD7DECIMALPAD9R7PAD10R6PAD11R5PAD4R4PAD3R3PAD12R2PAD2R1
pimoroni-optoelectronics:LTP-305From Eagle libraries

Footprint

PAD1PAD2PAD3PAD4PAD5PAD7PAD8PAD9
pimoroni-optoelectronics:LTP-305From Eagle libraries

Pinout

13
The pins of the LTP-305G
PinNameType
PAD1C2Unspecified
PAD2R1Unspecified
PAD3R3Unspecified
PAD4R4Unspecified
PAD5C1Unspecified
PAD7DECIMALUnspecified
PAD8C3Unspecified
PAD9R7Unspecified
PAD10R6Unspecified
PAD11R5Unspecified
PAD12R2Unspecified
PAD13C5Unspecified
PAD14C4Unspecified

Open-source boards using it

5
  • 2 layers65 × 56.5 mmLtp kikad, the printed circuit board in 3D

    Ltp kikad

    ADDTDR/Pitanga

    Prototype 0.01 | Pitanga V1 | Pitanga V2.1a :-------------------------:|:-------------------------:|:-------------------------: | |

    54 parts4MIT
  • 2 layers125 × 70 mmLTP305 ESP32 CLOCK, the printed circuit board in 3D

    LTP305 ESP32 CLOCK

    BasementCircuits/BulletTime

    ESP32 based clock using LTP305 led matrices

    65 parts4MIT
  • 2 layers22.7 × 20.6 mmUMatrix, the printed circuit board in 3D

    UMatrix

    PStinno/micro-matrix-pcb

    Small pcb design enabling control of an onboard LED matrix over I2C.

    16 partsCC-BY-SA-4.0
  • 2 layersLowPowerLEDSmartWatch, the printed circuit board in 3D

    LowPowerLEDSmartWatch

    StevenKnudsen/LowPowerLEDSmartWatch

    A nRF5x-based watch with dot LED display and optimized power management

    12 partsMIT
  • 2 layers11.5 × 26.2 mmCh32 led, the printed circuit board in 3D

    Ch32 led

    kingovchouffe/clk_led_matrix

    This repository contains KiCad hardware designs for a GNSS-oriented clock and LED matrix display. The primary design combines an STM32C0-series controller with an ATGM336H GNSS receiver; separate files capture a…

    8 parts

Questions

Is there a KiCad symbol and footprint for the LTP-305G?

Yes. The symbol is pimoroni-optoelectronics:LTP-305 and the footprint pimoroni-optoelectronics:LTP-305, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LTP-305G?

THroughhole, with 13 pins. Its footprint is drawn on this page.

Where can I order the LTP-305G?

JLCPCB lists it as part C7431212, with 0 in stock; the sellers' links on this page open their listings.

Which open-source boards use the LTP-305G?

5 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.