2 layers64 × 26.9 mm
2 layers35.6 × 69.9 mm
LEDs
pta2002/esp-rgbAn ESP8266-based RGB strip controller
- Size
- 35.6 × 69.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 16
- Nets
- 28
- Pads
- 63
- Tracks, vias
- 129, 13
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 23 Nov 2020
- Updated
- 25 Nov 2020
Overview
LEDs is an open-source printed circuit board by pta2002, from the pta2002/esp-rgb repository on GitHub. It is a 2-layer board of 35.6 × 69.9 mm with 16 parts on 28 nets, routed with 129 tracks and 13 vias.
It is built around the ESP-12F, LM1117-3.3 and IRLZ44N. Its parts include 5 resistors, 3 transistors, 3 connectors, 2 ICs and 2 switches. It belongs with the ESP8266 boards of this library.
Main components
3
ESP-12F
SMD,24x16mm-40℃~+85℃ -96dBm 15dBm 2.4GHz 3.3V 375mA 55mA PCB UART WIFI4 SMD,24x16mm WiFi Modules ROHSDOITWiFi Modules
LM1117-3.3
SOT-2231 1.3V@(1000mA) 15V 1A 2mA 3.3V Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHShongjiachengUncategorised
IRLZ44N
TO-22055V 47A N-Channel HEXFET® Power MOSFETInfineon TechnologiesUncategorised
README
README.mdESP RGB
An ESP8266-based RGB strip controller
Parts
16| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R3, R4, R5, R6, R7 |
| 3 | IRLZ44N | Package_TO_SOT_THT:TO-220-3_Vertical | Q1, Q2, Q3 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1 |
| 1 | 24V | Connector_Wire:SolderWire-0.75sqmm_1x02_P7mm_D1.25mm_OD3.5mm | J1 |
| 1 | 24V, RGB | Connector_Wire:SolderWire-0.75sqmm_1x04_P7mm_D1.25mm_OD3.5mm | J3 |
| 1 | ESP-12F | RF_Module:ESP-12E | U2 |
| 1 | FTDI 3.3v | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J2 |
| 1 | Flash | Button_Switch_SMD:SW_SPST_B3U-1000P | SW2 |
| 1 | LM1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | Reset | Button_Switch_SMD:SW_SPST_B3U-1000P | SW1 |
Similar boards
- 2 layers91 × 83 mm
DOORSENSOR
greenMikeEU/shrdzm
SHRDZM (just a name, not an acronym) is an ESP8285/ESP8266 based sensor and actor integration platform.
55 partsGPL-3.0 - 4 layers20 × 48.5 mm
Midea WiFi Dongle
reneklootwijk/mideahvac-dongle
This repository contains the hardware design of a WiFi dongle for Midea-like airconditioners and humidifiers. Midea provides a WiFi dongle (SK102/SK103), either as optional feature or built-in, to control the appliances…
21 parts75 - 2 layers93.1 × 41.1 mm
Esp wireless charging
speedy-scooty/opencoil
Goodies to produce your own e-scooter add-ons.
4 parts8GPL-3.0 - 2 layers188.2 × 22.5 mm
Wortuhr pcb
SteMaker/wortuhr
Wortuhr basierend auf ESP-12F incl. Firmware, PCB und Hardware-Beschreibung
16 parts7MIT - 2 layers76.2 × 46.9 mm
IoT Messenger
PR77/IoT_Messenger
IoT Messenger (Pager) For Simple 1 Way Communication
64 parts3LGPL-3.0 - 2 layers28 × 48 mm
E meter hardware
www-ShapeLabs-de/sgm4_to_mqtt
ESP8266 electricity meter reading head for SGM-C4 meter with homeassistant mqtt-discovery
34 parts3MIT - 2 layers69 × 67 mm
Questions
How big is the LEDs PCB?
It measures 35.6 × 69.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the LEDs use?
16 parts, built around the ESP-12F, LM1117-3.3 and IRLZ44N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LEDs KiCad files?
From the pta2002/esp-rgb repository on GitHub, at the commit this page was made from: the board is kicad/LEDs.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the LEDs design in my own project?
Its repository states no licence, so its author keeps all rights: ask pta2002 before reusing the design.