
Esp wireless charging
speedy-scooty/opencoil
Goodies to produce your own e-scooter add-ons.

Goodies to produce your own e-scooter add-ons.
Esp wireless charging is an open-source printed circuit board by speedy-scooty, from the speedy-scooty/opencoil repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 93.1 × 41.1 mm with 4 parts on 21 nets, routed with 32 tracks and 0 vias.
It is built around the ESP-12F and LM1117-3.3. Its parts include 2 ICs and 1 connector. It belongs with the ESP8266 boards of this library.

Goodies to produce your own e-scooter add-ons.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | ESP-12F | RF_Module:ESP-12E | U1 |
| 1 | LM1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | Val** | esp-wireless-charging-2:drawing | Ref** |

speedy-scooty/opencoil
Goodies to produce your own e-scooter add-ons.

reneklootwijk/mideahvac-dongle
This repository contains the hardware design of a WiFi dongle for Midea-like airconditioners and humidifiers. Midea provides a WiFi dongle (SK102/SK103), either as optional feature or built-in, to control the appliances…

SteMaker/wortuhr
Wortuhr basierend auf ESP-12F incl. Firmware, PCB und Hardware-Beschreibung

PR77/IoT_Messenger
IoT Messenger (Pager) For Simple 1 Way Communication

www-ShapeLabs-de/sgm4_to_mqtt
ESP8266 electricity meter reading head for SGM-C4 meter with homeassistant mqtt-discovery


dsi-fceia/persianaPCB
Proyecto desarrollado en Curso: Diseño integral de productos tecnológicos basados en Sistemas Electrónicos Embebidos


It measures 93.1 × 41.1 mm and has 2 copper layers, 1.6 mm thick.
4 parts, built around the ESP-12F and LM1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the speedy-scooty/opencoil repository on GitHub, at the commit this page was made from: the board is electronics/esp-wireless-charging-pcb/esp-wireless-charging.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).