
Fan pwm disconnecter panel 2x9
CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
Functional Reactive MIDI Controller Board #1
FRMIDIConBoard1 is an open-source printed circuit board by psg-titech, from the psg-titech/FRMIDIConBoard1 repository on GitHub, published under the MIT licence. It is a 2-layer board of 95 × 72 mm with 25 parts on 26 nets, routed with 234 tracks and 7 vias.
It is built around the 74AHC1G125GW. Its parts include 5 switches, 3 resistors, 3 connectors, 1 capacitor and 1 IC.
Functional Reactive MIDI Controller Board #1
![]()
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 10k | Potentiometer_THT:Potentiometer_Alps_RK09K_Single_Vertical | RV1, RV2, RV3, RV4, RV5, RV6, RV7, RV8 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_ISO14580 | H1, H2, H3, H4 |
| 2 | 220 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 1 | 0.1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 74AHC1G125 | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U1 |
| 1 | Arduino Pro Micro | Package_DIP:DIP-24_W15.24mm_Socket_LongPads | J1 |
| 1 | Button1 | FRMIDIConBoard:SW_PUSH-12mm | SW1 |
| 1 | Button2 | FRMIDIConBoard:SW_PUSH-12mm | SW2 |
| 1 | Button3 | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW4 |
| 1 | Grove | Connector:NS-Tech_Grove_1x04_P2mm_Vertical | J2 |
| 1 | MIDI OUT | Connector_Audio:Jack_3.5mm_Switronic_ST-005-G_horizontal | J3 |
| 1 | RESET | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW5 |
| 1 | RotaryEncoder_LED | FRMIDIConBoard:RotaryEncoder_TopUp_EC12PL-LED_Vertical_H20mm_CircularMountingHoles | SW3 |

CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.


jsphuebner/inverter-hardware
Eagle schematics of inverter main board, sensor boards and gate drivers


maholli/SAM32
Feather-sized SAMD51 with M4 core serving as UART bridge to WROOM ESP32

spel-uchile/balloon_experiment
Radiosonde platform to develop, test and integrate payloads for the future CubeSats missions

Loic74650/ioBoard
A relay (and more!) board with Ethernet connectivity and MQTT support

It measures 95 × 72 mm and has 2 copper layers, 1.6 mm thick.
25 parts, built around the 74AHC1G125GW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the psg-titech/FRMIDIConBoard1 repository on GitHub, at the commit this page was made from: the board is FRMIDIConBoard1.kicad_pcb and its schematic FRMIDIConBoard1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).