

PCB PCB Q Ballz Corrective Old Sensors 2024-09-24
Q-Ballz, inspired by an anime with 2 trackballs, 2x CORE-A Mcus, 34 keys, 10 RGBs
- Size
- 234.5 × 128 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 104
- Nets
- 102
- Pads
- 482
- Tracks, vias
- 905, 175
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 18 Sep 2024
- Updated
- 21 Oct 2024
Overview
PCB PCB Q Ballz Corrective Old Sensors 2024-09-24 is an open-source printed circuit board by protieusz, from the protieusz/Q-Ballz repository on GitHub. It is a 2-layer board of 234.5 × 128 mm with 104 parts on 102 nets, routed with 905 tracks and 175 vias.
It is built around the PMW3360DM-T2QU, AP2127K-ADJTRG1 and SN74LVC1T45DCKRE4, with the PRTR5V0U2X,215, TYPE-C-31-M-12 and NSMD050 among its other parts. Its parts include 34 switches, 22 diodes, 18 ICs, 14 resistors and 8 capacitors. It belongs with the keyboards and input and sensors and measurement boards of this library.
Main components
6PMW3360DM-T2QU
DIP-16Low-power mode、Interrupt output、Self-test function DIP-16 Specialized Sensors ROHSPixArtSpecialized SensorsAP2127K-ADJTRG1
SOT-23-5-40℃~+85℃ 1 300mA 300mV@(300mA) 45dB@(10kHz)、68dB@(100Hz) 60uA 60uVrms 800mV~5.5V 9V Adjustable Over Current Protection、Over Temperature Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsSN74LVC1T45DCKRE4
SC-70-6-40℃~+85℃ 1 1 1.65V~5.5V 1.65V~5.5V 24mA 24mA 420Mbps Bidirectional Level translator Power-off protection、Output enable high-impedance Tri-State SC-70-6 Translators, Level Shifters ROHSTexas InstrumentsTranslators / Level ShiftersPRTR5V0U2X,215
-UncategorisedNXP SemiconductorsTYPE-C-31-M-12
SMD-30℃~+80℃ 1 10,000 cycles 16P 20V 5A 7.35mm Female Surface Mount, Right Angle Type-C SMD USB Connectors ROHSHRO ElectronicsUSB ConnectorsNSMD050
1206-40℃~+85℃ 100A 100ms 150mΩ 1A 500mA 600mW 6V 700mΩ 1206 Resettable Fuses ROHS台湾陆海Resettable Fuses
README
README.mdQ-Ballz
Q-Ballz, inspired by an anime with 2 trackballs, 2x CORE-A Mcus, 34 keys, 10 RGBs
Description
Case design shape was inspired by a Neo Zeon prototype mobile suit, Qubeley, one of the underrated MS from the Gundam Zeta series hence the name "Q-Ballz". Q-Ballz uses 2 trackballs as the previous OverLord, where this time the top ball is mouse movement and bottom is scrolling. The size of the custom keeb design is similar size to Sachiel or the Excelsior. Nice and compact for office use and wow factor with 10 RGBs on the vents and eyes. There might be some flaws on the "notches" that clips both top and bottom case together. Slight oversight but can make it work with tiny DIY. Print at your own risk.
Oct 19, 2024: Q-Ballz is fully build and functional. All RGBs on both sides are fully working. Thanks to Drashna Jael're from fingerpunch discord for helping me out with QMK part and validation of my solder hack. Please see below pic for the hack details.
Oct 17, 2024: Q-Ballz fully build but only RIGHT side RGBs are fully working. Voltage and continuity all checks out. So I suspect it might be the QMK code. Hopefully the QMK code can be fixed. As for the effect of having set color RGBs for each sides, I tried using transparent colored plastic but it turns out that they are too thin and the RGB lights overpowered it. If someone can program where the RGBs on the right are always constant Blue for the circle vents while the Right eye is Pink, right vents pink while the rest of the LEFT side is pink. Anywayz Qubeley custom keeb mission accomplished.
Sept 18, 2024: PCB print will not be printed until October ish since my PMW3360 sensors and SA keycaps have not arrive yet. I am very excited for this build design.
Disclaimer
This work is a non-commercial fan creation of custom keyboard case and PCB in the shape of Qubeley from the Gundam Zeta series. It is made out of love and respect for the Gundam Zeta series. All rights to Gundam and related content are owned by Bandai Namco Holdings Inc and its associated companies. The images, names, storylines and other elements of Gundam used in this work are the property of their respective copyright holders. Unauthorized commercial use is strictly prohibited. The license of this design reflects not for commercial use. Only the PCB files, QMK source will be open source. The case files due to copyright issues will not be open sourced.
Please print and use the case and PCB at your own risk. QMK code is derived from the QMK documentation and copy over from my OverLord build.
Full Build
Oct 17, 2024
I had to think outside the box by making the RGBs working on both sides. I edit the config.h RGB split settings to (0, 10) to have all the RGBs sourced from the RIGHT side for all the RGBs.
Then I solder the DOUT from the RIGHT side to the DIN of the LEFT for the RGBs and it worked! Shout out to Drashna Jael're from fingerpunch Discord channel for helping me out with QMK part and validation of my solder hack.
Renders
License
You are free to:
Share — copy and redistribute the material in any medium or format
Adapt — remix, transform, and build upon the material
The licensor cannot revoke these freedoms as long as you follow the license terms. Under the following terms:
Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
NonCommercial — You may not use the material for commercial purposes.
ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
Q-Ballz by ProtieusKeebs is licensed under CC BY-NC-SA 4.0
Parts
104| Qty | Value | Footprint | References |
|---|---|---|---|
| 34 | 100 | easyeda:CHERRY_MX_100_MILLMAX | K000, K000B, K001, K001B, K002, K002B, K003, K003B, K004, K004B, K100, K100B, K101, K101B, K102, K102B +18 |
| 20 | BAV70-C68978 | easyeda:SOT-23-3_L3.0-W1.7-P0.95-LS2.9-BR | D000, D000B, D002, D002B, D004, D004B, D100, D100B, D102, D102B, D104, D104B, D200, D200B, D202, D202B +4 |
| 10 | SK6812MINI-E_C5149201 | easyeda:LED-SMD_L3.2-W2.8-TR | U01, U01R, U02, U02R, U03, U03R, U04, U04R, U05, U05R |
| 6 | 10kΩ | easyeda:R0402 | R10, R10B, R12, R12B, R13, R13B |
| 6 | 4.7uF | easyeda:C0402 | C17, C17B, C19, C19B, C20, C20B |
| 4 | 5.1kΩ | easyeda:R0402 | R1, R2, R3, R4 |
| 4 | SOLDER JUMPER PADS | easyeda:SOLDER BRIDGE JUMPER PADS | JP1GND, JP2RX, JP3TX, JP4+5V |
| 2 | 100nF | easyeda:C0402 | C18, C18B |
| 2 | 15kΩ | easyeda:R0402 | R14, R14B |
| 2 | 39Ω | easyeda:R0402 | R11, R11B |
| 2 | 5 | easyeda:RP2040-CORE-A | U1L, U1R |
| 2 | AP2127K-ADJTRG1 | easyeda:SOT-23-5_L3.0-W1.7-P0.95-LS2.8-BR | U8, U8B |
| 2 | PMW3360DM-T2QU | easyeda:PMW3360DM-T2QU.PACK | U7, U7B |
| 2 | PRTR5V0U2X,215 | easyeda:SOT-143_L2.9-W1.3-P1.92-LS2.3-BR | D6, D11 |
| 2 | SN74LVC1T45DCKR | easyeda:SC-70-6_L2.2-W1.3-P0.65-LS2.2-BR | U6L, U6R |
| 2 | TYPE-C-31-M-12 | easyeda:USB-C_SMD-TYPE-C-31-M-12 | USBCL, USBCR |
| 2 | nSMD050 | easyeda:F1206 | F1, F3 |
Similar boards
- 2 layers34.3 × 16 mm

- 2 layers286.4 × 96.1 mm

VoidHHKB Solder
hungrygeek/HSKB
Open-source HHKB-layout MX custom keyboard — KiCad PCB, case STL, QMK/VIA firmware. Personal iteration of the HSKB (Happy Sabi Keyboard).
163 parts5 - 2 layers45 × 28 mm

PiVideoCapturer
Sasasu/PiVideoCapturer
A video capturer using TC358840XBG and arm SoC
44 parts30GPL-3.0 - 6 layers80 × 70 mm

IMX6 Demo Board from REF
ts-manuel/iMX6-Demo-Board
Demo board for the i.MX6ULL Single-Core Processor with Arm Cortex-A7 Core
504 parts10GPL-3.0 - 4 layers100 × 90 mm

- 2 layers65 × 54 mm

Coffeecaller
tiacsys/ecad-coffeecaller
CoffeeCaller. Once a nice office gadget it now evolved to a small development board for the Nordic nRF52840.
85 parts14CERN-OHL-S-2.0 - 2 layers76.2 × 123.5 mm

- 4 layers100 × 60 mm

Questions
How big is the PCB PCB Q Ballz Corrective Old Sensors 2024-09-24 PCB?
It measures 234.5 × 128 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PCB PCB Q Ballz Corrective Old Sensors 2024-09-24 use?
104 parts, built around the PMW3360DM-T2QU, AP2127K-ADJTRG1, SN74LVC1T45DCKRE4 and PRTR5V0U2X,215. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PCB PCB Q Ballz Corrective Old Sensors 2024-09-24 KiCad files?
From the protieusz/Q-Ballz repository on GitHub, at the commit this page was made from: the board is Non Sponsored Gerbers REV02/PCB_PCB_Q-Ballz-Corrective-Old-Sensors_2024-09-24.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the PCB PCB Q Ballz Corrective Old Sensors 2024-09-24 design in my own project?
Its repository states no licence, so its author keeps all rights: ask protieusz before reusing the design.