2 layers90.2 × 95.9 mm
2 layers45 × 28 mm
PiVideoCapturer
Sasasu/PiVideoCapturer30A video capturer using TC358840XBG and arm SoC
- Size
- 45 × 28 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 44
- Nets
- 107
- Pads
- 289
- Tracks, vias
- 3,445, 91
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 12 Feb 2021
- Updated
- 20 Nov 2023
Overview
PiVideoCapturer is an open-source printed circuit board by Sasasu, from the Sasasu/PiVideoCapturer repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 45 × 28 mm with 44 parts on 107 nets, routed with 3,445 tracks and 91 vias.
It is built around the AP2127K-ADJTRG1, TC358840XBG and ESD0524P, with the SG-310SCF among its other parts. Its parts include 18 capacitors, 11 resistors, 4 ICs, 4 connectors and 3 diodes.
Main components
4
AP2127K-ADJTRG1
SOT-23-5-40℃~+85℃ 1 300mA 300mV@(300mA) 45dB@(10kHz)、68dB@(100Hz) 60uA 60uVrms 800mV~5.5V 9V Adjustable Over Current Protection、Over Temperature Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
TC358840XBG
VFBGA-80(7x7x0.65)VFBGA-80(7x7x0.65) New Arrivals ROHSToshibaUncategorised
ESD0524P
DFN2510-10-55℃~+125℃ 10V 1A 1uA 5V 60W 9V ESD DFN2510-10 ESD and Surge Protection (TVS/ESD) ROHSMDDESD And Surge Protection (TVS/ESD)
SG-310SCF
Crystal OscillatorSeiko EpsonUncategorised
README
README.mdPiVideoCapturer
A video capturer using TC358840XBG and arm SoC
Linux driver for Linux 4.x and Linux 5.x
Also a DTS example.
And a debugging driver for RK3399 with kernel 4.4.
License: GPLv3
TC358840XBG is completely EOL now. I personally recommend use RK3588 instead, RK3588 has a HDMI IN port.
Parts
44| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C5, C6, C8, C9, C10, C11, C12, C14, C15, C16, C17 |
| 6 | 10uf | Capacitor_SMD:C_0402_1005Metric | C2, C3, C4, C7, C13, C18 |
| 3 | AP2127K-ADJTRG1 | pi_video_capturer:SOT-23-5 | U2, U3, U4 |
| 3 | ESD0524P | pi_video_capturer:Diodes_UDFN-10_1.0x2.5mm_P0.5mm | D1, D2, D3 |
| 2 | 33k | Resistor_SMD:R_0402_1005Metric | R18, R20 |
| 2 | 47k | Resistor_SMD:R_0402_1005Metric | R10, R12 |
| 2 | 68k | Resistor_SMD:R_0402_1005Metric | R16, R17 |
| 2 | MIPI_30PIN | pi_video_capturer:MIPI_30PIN_FPC_0.5mm | J3, J4 |
| 1 | 10K | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 1K | Resistor_SMD:R_0402_1005Metric | R11 |
| 1 | 20pF | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | 22k | Resistor_SMD:R_0402_1005Metric | R15 |
| 1 | 2K | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 75k | Resistor_SMD:R_0402_1005Metric | R19 |
| 1 | Conn_01x09_Female | Connector_PinSocket_2.54mm:PinSocket_1x09_P2.54mm_Vertical | J2 |
| 1 | HDMI | pi_video_capturer:TE_5-1903015-5 | J1 |
| 1 | LOGO | pi_video_capturer:logo | G*** |
| 1 | SG-310SCF | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | X1 |
| 1 | TC358840XBG | pi_video_capturer:BGA80C65P10X10_700X700X100N | U1 |
The 42 most common of 44 parts.
Similar boards
- 2 layers22.9 × 50.3 mm
- 4 layers44 × 44 mm
- 6 layers80 × 70 mm
IMX6 Demo Board from REF
ts-manuel/iMX6-Demo-Board
Demo board for the i.MX6ULL Single-Core Processor with Arm Cortex-A7 Core
504 parts10GPL-3.0 - 4 layers100 × 90 mm
- 2 layers234.5 × 128 mm
PCB PCB Q Ballz Corrective Old Sensors 2024-09-24
protieusz/Q-Ballz
Q-Ballz, inspired by an anime with 2 trackballs, 2x CORE-A Mcus, 34 keys, 10 RGBs
104 parts3 - 4 layers25 × 12.5 mm
- 2 layers
Questions
How big is the PiVideoCapturer PCB?
It measures 45 × 28 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PiVideoCapturer use?
44 parts, built around the AP2127K-ADJTRG1, TC358840XBG, ESD0524P and SG-310SCF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PiVideoCapturer KiCad files?
From the Sasasu/PiVideoCapturer repository on GitHub, at the commit this page was made from: the board is PiVideoCapturer.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the PiVideoCapturer design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).