

2018-03-05-StateVariable2
Manually variable stereo filter (BP, HP, LP) in two sections
- Size
- 100 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 125
- Nets
- 61
- Pads
- 319
- Tracks, vias
- 702, 78
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 10 Jan 2019
- Updated
- 27 Jan 2019
Overview
2018-03-05-StateVariable2 is an open-source printed circuit board by promesoft, from the promesoft/Kicad-BiquadFilter repository on GitHub. It is a 2-layer board of 100 × 100 mm with 125 parts on 61 nets, routed with 702 tracks and 78 vias.
It is built around the MC33078D, L7812 and L7912. Its parts include 43 resistors, 36 capacitors, 23 connectors, 11 ICs and 4 fuses.
Main components
3MC33078D
SOIC-8-40℃~+85℃ -5V~18V 100dB 150uV 16MHz 2 25nA 29mA 2uV/℃ 300nA 4.1mA 4.5nV/√Hz@1kHz 7V/us SOIC-8 Operational Amplifier ROHSonsemiOperational AmplifierL7812
TO-220ST0℃~+125℃@(Tj) 1 1.2A 12V 2V@(1A) 30V 71dB@(120Hz) 76uV Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsL7912
TO-220ST0℃~+125℃@(Tj) 1 1.2A 12V 200uV 2V@(1A) 35V 3mA 60dB@(120Hz) Fixed Negative Over Voltage Protection、Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdKicadBiquadFilter
Manually variable stereo filter (BP, HP, LP) in two sections
Status - Rev A Produced Both sections operational
Errata
- Section 2 feedback OpAmp incorrect - has to be bypassed
- Footprint of Op Amp little too small for the packages in stock
Issues and Notes
Issues
Wishlist for Rev B
- should handle connectors and Potmeters on the PCB
- Potmeters should have optional resistor in series and parallel
- Section 1 adjustable: R5/6 stereo 100k + 680R and R11/13 stereo 20k + 680R
- Capacitors as THT 47nF polyprop
- Focus on Eurorack compatibility
- Mono filter
- VCF option
Physical Construction
- 100x100mm
- Several resistors has been selected as THT components so a Potmeter can be placed instead
The board is split in two, joined at the center of the board. Each section is a stereo section that can operate individually.
Section 1 - State Variable filter and buffer amp

Section 2 - State Variable filter and regulator
Vital Components
- Op Amp is chosen as MC33078 but can be selected as long as its pin compatible like (ua833, TL062, TL072, TL082, etc)
Section 1 Filter components for High Q variable freq and Q:
- R8 / R5 - 680R + 100k Stereo Pot
- R10 / R7 - 680R + 100k Stereo Pot
- R3 / R1 - 47k
- R4 / R2 - 47k
- R9 / R6 - 47k
- R12 / R11 - 680R + 20k Stereo Pot
- R14 / R13 - 680R + 20k Stereo Pot
- R16 / C15 - 47nF
- R18 / C17 - 47nF
Fc - 163Hz - 5KHz
Q - 0,68 - 6,9
Features
The state variable filter can be configured in different ways and needs to be calculated before the components are selected.
https://www.electronics-tutorials.ws/filter/state-variable-filter.html
Parts
125| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | 10k | Resistors_SMD:R_0805_HandSoldering | R2, R4, R10, R17, R18, R20, R22, R24, R25, R27, R28, R29, R30, R38, R39, R40 +4 |
| 16 | 10k | Resistors_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R1, R3, R5, R8, R11, R12, R13, R14, R19, R21, R23, R26, R31, R32, R35, R36 |
| 12 | 100nF | Capacitors_SMD:C_0805_HandSoldering | C5, C6, C11, C12, C13, C14, C23, C24, C27, C28, C31, C32 |
| 9 | MC33078 | Active:SO-8 | U1, U2, U3, U4, U5, U6, U7, U8, U9 |
| 6 | MountingHole_3.2mm_M3 | Mounting_Holes:MountingHole_3.2mm_M3 | MNT-M3.1, MNT-M3.1, MNT-M3.1, MNT-M3.1, MNT-M3.1, MNT-M3.1 |
| 4 | 1000uF | Capacitors_THT:CP_Radial_D12.5mm_P5.00mm | C1, C2, C19, C20 |
| 4 | 100nF | Capacitors_SMD:C_1206_HandSoldering | C7, C8, C25, C26 |
| 4 | 100uF | Capacitors_Tantalum_SMD:CP_Tantalum_Case-B_EIA-3528-21_Hand | C3, C4, C21, C22 |
| 4 | 10k | Resistors_Universal:Resistor_SMD+THTuniversal_0805to1206_RM10_HandSoldering | R15, R16, R33, R34 |
| 4 | C | Capacitors_THT:C_Rect_L10.0mm_W4.0mm_P7.50mm_MKS4 | C9, C10, C35, C36 |
| 4 | Fuse | Fuse_Holders_and_Fuses:Fuse_TE5_Littlefuse-395Series | F1, F2, F3, F4 |
| 3 | Power | Connectors_WAGO:WAGO_734_3pin_Straight | J5, J16, J23 |
| 2 | 10nF | Capacitors_THT:C_Rect_L11.5mm_W5.0mm_P10.00mm_MKT | C29, C33 |
| 2 | 10nF | Resistors_Universal:Resistor_SMD+THTuniversal_0805to1206_RM10_HandSoldering | C17, C18 |
| 2 | 10nF | Capacitors_THT:C_Rect_L10.0mm_W4.0mm_P7.50mm_MKS4 | C15, C16 |
| 2 | 10nF | Resistors_Universal:Resistor_SMD+THTuniversal_0805to2512_RM10_HandSoldering | C30, C34 |
| 2 | 1k | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R37, R42 |
| 2 | LED | LEDs:LED_D5.0mm | D1, D2 |
| 1 | 0R | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R43 |
| 1 | Amp Input L | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J19 |
| 1 | Amp Input R | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J20 |
| 1 | Amp Out L | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J21 |
| 1 | Amp Out R | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J22 |
| 1 | BP L1 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J6 |
| 1 | BP L2 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J15 |
| 1 | BP R1 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J7 |
| 1 | BP R2 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J14 |
| 1 | HP L1 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J3 |
| 1 | HP L2 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J13 |
| 1 | HP R1 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J4 |
| 1 | HP R2 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J12 |
| 1 | Input L | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J1 |
| 1 | Input L2 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J11 |
| 1 | Input R | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J2 |
| 1 | Input R2 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J10 |
| 1 | L7812 | Power_Integrations:TO-220 | U10 |
| 1 | L7912 | Power_Integrations:TO-220 | U11 |
| 1 | LP L1 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J8 |
| 1 | LP L2 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J18 |
| 1 | LP R1 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J9 |
| 1 | LP R2 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J17 |
Similar boards
- 2 layers140 × 75 mm

- 2 layers107.9 × 44.5 mm

PSU
JacobParent7/Eurorack-PSU
This repository has the KiCAD design files for a simple +12/-12V Eurorack PSU PCB that does not require a center tapped transformer. It also includes the BOM and CPL to order directly from a PCB Fab such as JLC PCB
22 parts1 - 2 layers100 × 40 mm

- 2 layers72 × 47 mm

- 2 layers130 × 100 mm

Audiovisualiser
alimleahat/analog-audio-visualizer-pcb
Three-band analog audio visualizer built in KiCad for ELEC2101, with PCB files, assembly photos, and bench measurements.
69 parts - 2 layers193 × 160 mm

- 2 layers188.3 × 93 mm

- 2 layers178 × 127 mm

Questions
How big is the 2018-03-05-StateVariable2 PCB?
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the 2018-03-05-StateVariable2 use?
125 parts, built around the MC33078D, L7812 and L7912. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 2018-03-05-StateVariable2 KiCad files?
From the promesoft/Kicad-BiquadFilter repository on GitHub, at the commit this page was made from: the board is 2018-03-05-StateVariable2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the 2018-03-05-StateVariable2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask promesoft before reusing the design.