Skip to the content
2 layers42 × 39 mmDaughterboard, the printed circuit board in 3D

Daughterboard

profdc9/VNA93

Vector Network Analyzer based on the STM32F103C8T6 bluepill

Size
42 × 39 mm
Copper layers
2
Thickness
1.6 mm
Parts
18
Nets
13
Pads
67
Tracks, vias
191, 10
Pours
2
Routed
Yes
KiCad
KiCad 4
Created
2 Oct 2018
Updated
2 Jan 2021

Overview

Daughterboard is an open-source printed circuit board by profdc9, from the profdc9/VNA repository on GitHub. It is a 2-layer board of 42 × 39 mm with 18 parts on 13 nets, routed with 191 tracks and 10 vias.

Its parts include 8 resistors, 5 connectors and 4 switches. It belongs with the sensors and measurement boards of this library.

README

README.md

This a project to create a Vector Network Analyzer based on the EU1KY antenna tuner that can be reconfigured for different needs. This material is copyrighted by Daniel Marks (KW4TI) and licensed under the Creative Commons License CC-BY-SA 4.0. The software is licensed under the zlib license. These are open source licenses that permit commercial use, modification and redistribution with attribution, and require licensees to assume all risk for using the copyrighted materials.

Currently what is on this github are the Kicad files for the VNA and the software. The software uses the "stm32duino" extension to the Arduino IDE. The Arduino IDE can be downloaded from

https://www.arduino.cc/en/Main/Software

The stm32duino software can be installed using the instructions on the stm32duino web site

https://github.com/rogerclarkmelbourne/Arduino_STM32/wiki/Installation

which involves (at this time) downloading the git archive for the stm32duino and placing it under the "hardware" folder in your Arduino folder.

There are several Arduino libraries that are required for the SI5351A frequency synthesizer chip, ILI9341 TFT display module, and XPT2046 touchscreen controller. These are provided for your use under the "libraries" directory of this archive, but may not be the most recent versions. You could copy these directories into the "libraries" folder in your Arduino directory.


The VNA may be used with or without a touchscreen. If a touchscreen it used, it should be compiled with the "VNA_TOUCHSCREEN" defined in VNA.h. If you do not have a touchscreen, you can ground the pin PB13 and it will start up without a touchscreen, only appearing a USB CDC serial port device. You can then type "HELP" to see the list of commands.

The touchscreen used is a 2.8" touchscreen with a SPI interface to the ILI9341 and XPT2046. These are commonly available at a low price. To connect it to the SPI interface connector header "J1" on the board, use a 14 pin IDC ribbon cable.

Parts

18
QtyValueFootprintReferences
4100kResistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR2, R4, R6, R8
4100kResistors_SMD:R_0805_HandSolderingR1, R3, R5, R7
4Conn_01x01Connectors:1pinJ2, J3, J4, J5
3SW_PushButtons_Switches_THT:SW_PUSH_6mmSW1, SW3, SW4
1Conn_02x07_Odd_EvenPin_Headers:Pin_Header_Straight_2x07_Pitch2.54mmJ1
1ILIdisplayPin_Headers:Pin_Header_Straight_1x14_Pitch2.54mmDISP1
1Rotary_Encoder_Switch_Alpsdaughterboard:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mmSW2

More from profdc9/VNA

2
  • 2 layers100 × 85 mmVNA, the printed circuit board in 3D

    VNA

    profdc9/VNA

    Vector Network Analyzer based on the STM32F103C8T6 bluepill

    178 parts93
  • 2 layers100 × 100 mmVNA, the printed circuit board in 3D

    VNA

    profdc9/VNA

    Vector Network Analyzer based on the STM32F103C8T6 bluepill

    138 parts93

Similar boards

  • 2 layers27.9 × 16.5 mmPowerSSO-24 breakout, the printed circuit board in 3D

    PowerSSO-24 breakout

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    18 parts1.2k
  • 2 layers42.7 × 13.7 mmStm32-mini12864, the printed circuit board in 3D

    Stm32-mini12864

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    18 parts1.1kGPL-3.0
  • 2 layers41.2 × 46.6 mmThumb cluster left, the printed circuit board in 3D

    Thumb cluster left

    JesusFreke/lalboard

    A 3D-printed keyboard inspired by the DataHand

    18 parts993
  • 2 layers44 × 51.3 mm4272MAVcoder R4, the printed circuit board in 3D

    4272MAVcoder R4

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    18 parts915
  • 2 layers28.3 × 14.3 mmTap Photosensor PCB, the printed circuit board in 3D

    Tap Photosensor PCB

    VoronDesign/Voron-Tap

    Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:

    18 parts716GPL-3.0
  • 2 layers20.3 × 15.2 mmL0 stepper driver, the printed circuit board in 3D

    L0 stepper driver

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    18 parts546MIT
  • 2 layersMooltipass, the printed circuit board in 3D

    Mooltipass

    limpkin/mooltipass

    Github repository dedicated to the mooltipass project

    18 parts531
  • 2 layers42.5 × 28.8 mmC5VRX JACK DIY V2, the printed circuit board in 3D

    C5VRX JACK DIY V2

    Twotoz/C5VRX

    Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS

    18 parts515GPL-3.0

Questions

How big is the Daughterboard PCB?

It measures 42 × 39 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Daughterboard use?

18 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Daughterboard KiCad files?

From the profdc9/VNA repository on GitHub, at the commit this page was made from: the board is daughterboard/daughterboard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Daughterboard design in my own project?

Its repository states no licence, so its author keeps all rights: ask profdc9 before reusing the design.