4 layers99 × 53.3 mm
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0
2 layers115.9 × 70.6 mm
Macrotype-1
PRIMogEnitus/Macrotype-1Macropad for work(maybe?)
- Size
- 115.9 × 70.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 30
- Nets
- 36
- Pads
- 180
- Tracks, vias
- 110, 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 3 Dec 2023
- Updated
- 6 Dec 2023
Overview
Macrotype-1 is an open-source printed circuit board by PRIMogEnitus, from the PRIMogEnitus/Macrotype-1 repository on GitHub, published under the MIT licence. It is a 2-layer board of 115.9 × 70.6 mm with 30 parts on 36 nets, routed with 110 tracks and 2 vias.
It is built around the 1N4148W. Its parts include 14 diodes, 1 IC and 1 switch. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdMacrotype-1
Macropad for work(maybe?)
Parts
30| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 1N4148W | Diode_SMD:D_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14 |
| 14 | MX_SW_HS | marbastlib-mx:SW_MX_HS_1u | MX1, MX2, MX3, MX4, MX5, MX6, MX7, MX8, MX9, MX10, MX11, MX12, MX13, MX14 |
| 1 | MOMENTARY-SWITCH-SPST-SMD-6.0X3.5MM | Switches:TACTILE_SWITCH_SMD_6.0X3.5MM | S1 |
| 1 | ProMicro | marbastlib-xp-promicroish:ProMicro_USBup | U1 |
Questions
How big is the Macrotype-1 PCB?
It measures 115.9 × 70.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Macrotype-1 use?
30 parts, built around the 1N4148W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Macrotype-1 KiCad files?
From the PRIMogEnitus/Macrotype-1 repository on GitHub, at the commit this page was made from: the board is Macrotype-1/Macrotype-1.kicad_pcb and its schematic Macrotype-1/Macrotype-1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Macrotype-1 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers208.8 × 396.9 mm
Ferris
pierrechevalier83/ferris
A low profile split keyboard designed to satisfy one single use case elegantly
145 parts1.3k - 2 layers285.5 × 95 mm
- 4 layers95.6 × 73.6 mm
- 2 layers141.5 × 83 mm
Rolio
MickiusMousius/Rolio46Keyboard
A split wireless keyboard based on the Corne and Sofle
110 parts236MIT - 6 layers160 × 100 mm
- 2 layers99.1 × 90.7 mm
Bgkeeb
sadekbaroudi/bgkeeb
This is a reversible 100mm x 100mm pcb with support for mx or choc switches (no hotswap), per key led, rotary encoders, and exposes the SDA/SCL/GND/VCC lines in the form of the pimoroni trackball pins (meaning you can…
108 parts108 - 2 layers229.8 × 102.6 mm
