

RPi HwAB-1
raspberry pi 5 hardware acceleration hat+ over pcie using xc7a
- Size
- 65 × 56 mm
- Copper layers
- 8
- Thickness
- 1.61 mm
- Parts
- 149
- Nets
- 398
- Pads
- 1,044
- Tracks, vias
- 2,532, 494
- Pours
- 1,000
- Routed
- Yes
- KiCad
- KiCad 9.99 (file 20260101)
- Created
- 23 Aug 2025
- Updated
- 27 Jan 2026
Overview
RPi HwAB-1 is an open-source printed circuit board by prestofuoco, from the prestofuoco/RPi-HwAB repository on GitHub, published under the MIT licence. It is an 8-layer board of 65 × 56 mm with 149 parts on 398 nets, routed with 2,532 tracks and 494 vias.
It is built around the CAT24C256LI and XC7A100T-FGG484. Its parts include 75 capacitors, 42 resistors, 9 ICs, 4 inductors and 3 diodes. It belongs with the FPGA and CPLD boards of this library.
Main components
2Parts
149| Qty | Value | Footprint | References |
|---|---|---|---|
| 50 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C1, C2, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25, C26, C27, C28, C29 +34 |
| 9 | 100 1% | Resistor_SMD:R_0402_1005Metric | R16, R25, R26, R27, R28, R34, R35, R36, R37 |
| 9 | 4.7K | Resistor_SMD:R_0402_1005Metric | R17, R18, R21, R22, R29, R30, R33, R39, R42 |
| 7 | 10uF | Capacitor_SMD:C_1206_3216Metric | C5, C43, C48, C50, C57, C59, C61 |
| 7 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C49, C51, C52, C58, C60, C62, C70 |
| 6 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | 1V0_FD, 1V0_MGT, 1V2, 1V8, 1V35, 3V3_FD |
| 5 | 2.2uF | Capacitor_SMD:C_0603_1608Metric | C7, C8, C9, C10, C11 |
| 5 | 20K | Resistor_SMD:R_0402_1005Metric | R11, R12, R13, R14, R15 |
| 5 | 22uF | Capacitor_SMD:C_0603_1608Metric | C3, C12, C13, C14, C15 |
| 4 | 1.5uH | Inductor_SMD:L_Coilcraft_XAL4020-XXX | L1, L2, L3, L4 |
| 4 | 10 | Resistor_SMD:R_0402_1005Metric | R4, R5, R8, R9 |
| 2 | 1K | Resistor_SMD:R_0402_1005Metric | R19, R40 |
| 2 | 2.2K 1% | Resistor_SMD:R_0402_1005Metric | R31, R32 |
| 2 | 3.9k | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | Fiducial | Fiducial:Fiducial_1mm_Mask3mm | FID1, FID2 |
| 2 | INA230AIRGTR | Package_DFN_QFN:VQFN-16-1EP_3x3mm_P0.5mm_EP1.6x1.6mm | U8, U10 |
| 2 | MountingHole_2.7mm_M2.5 | MountingHole:MountingHole_2.7mm_M2.5 | MH1, MH4 |
| 1 | 0.003 1% | Resistor_SMD:R_1206_3216Metric | R3 |
| 1 | 0.005 | Resistor_SMD:R_1206_3216Metric | R6 |
| 1 | 100K | Resistor_SMD:R_0402_1005Metric | R24 |
| 1 | 10K 1% | Resistor_SMD:R_0402_1005Metric | R7 |
| 1 | 120R @ 100MHz | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | 15K 1% | Resistor_SMD:R_0402_1005Metric | R10 |
| 1 | 1k | Resistor_SMD:R_0402_1005Metric | R38 |
| 1 | 2.2K | Resistor_SMD:R_0402_1005Metric | R23 |
| 1 | 240 1% | Resistor_SMD:R_0402_1005Metric | R20 |
| 1 | 330 | Resistor_SMD:R_0402_1005Metric | R41 |
| 1 | 4.7nF | Capacitor_SMD:C_0402_1005Metric | C6 |
| 1 | CAT24C256 | Package_DFN_QFN:DFN-8-1EP_3x2mm_P0.5mm_EP1.7x1.4mm | U1 |
| 1 | GPIO | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | J2 |
| 1 | Hirose_FH12-16S | Connector_FFC-FPC:Hirose_FH12-17S-0.5SH_1x17-1MP_P0.50mm_Horizontal | J3 |
| 1 | ID_WP | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1 |
| 1 | LED Blue | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | LED Green | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | LED Red | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | MAX20029 | Package_DFN_QFN:WQFN-28-1EP_4x4mm_P0.4mm_EP2.7x2.7mm | U3 |
| 1 | MCP9804T-E/MC | Package_DFN_QFN:DFN-8-1EP_3x2mm_P0.5mm_EP1.7x1.4mm | U9 |
| 1 | MT41K256M16TW-107:P TR | Package_BGA:Micron_FBGA-96_7.5x13.5mm_Layout9x16_P0.8mm | U6 |
| 1 | MX25L12835F | Package_SON:WSON-8-1EP_6x5mm_P1.27mm_EP3.4x4mm | U7 |
| 1 | SiT9365AI-2B2-33 | Oscillator:Oscillator_SMD_SiTime_PQFD-6L_3.2x2.5mm | Y1 |
| 1 | TC2030 | Connector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J1 |
| 1 | TPSM82903 | library:TPSM82903SISR | U2 |
| 1 | XC7A100T-FGG484 | library:Xilinx_FGG484 | U4 |
Similar boards
- 6 layers144.7 × 92.3 mm

- 4 layers210.7 × 85 mm

- 6 layers100 × 139 mm

- 6 layers160 × 100 mm

- 2 layers65 × 56.5 mm

- 2 layers

- 4 layers158.8 × 104.1 mm

- 4 layers205.5 × 152 mm

Questions
How big is the RPi HwAB-1 PCB?
It measures 65 × 56 mm and has 8 copper layers, 1.61 mm thick.
What parts does the RPi HwAB-1 use?
149 parts, built around the CAT24C256LI and XC7A100T-FGG484. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RPi HwAB-1 KiCad files?
From the prestofuoco/RPi-HwAB repository on GitHub, at the commit this page was made from: the board is pcb/RPi-HwAB-1.kicad_pcb and its schematic pcb/1v0.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the RPi HwAB-1 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).