

FuzzyDuck
If it quacks like a duck, and is fuzzy to the touch...
- Size
- 100 × 139 mm
- Copper layers
- 6
- Thickness
- 1.2 mm
- Parts
- 281
- Nets
- 588
- Pads
- 1,762
- Tracks, vias
- 26,330, 581
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 5 (file 20210108)
- Created
- 22 Mar 2021
- Updated
- 22 Mar 2021
Overview
FuzzyDuck is an open-source printed circuit board by Jegeva, from the Jegeva/FuzzyDuck repository on GitHub. It is a 6-layer board of 100 × 139 mm with 281 parts on 588 nets, routed with 26,330 tracks and 581 vias.
It is built around the NLSX3018DT, AP2303N-VB and FT2232HQ, with the XC7A100T-FGG484, DMG2301L and ASTMLPE-18-100.000MHZ-LJ-E-T among its other parts. Its parts include 100 capacitors, 80 resistors, 26 connectors, 17 ICs and 11 diodes. It belongs with the FPGA and CPLD boards of this library.
Main components
6NLSX3018DT
TSSOP-20-40℃~+85℃ 1 1.3V~4.5V 110Mbps 8 900mV~4.5V Automatic direction detection、Output enable high-impedance Bidirectional Level translator Tri-State TSSOP-20 Translators, Level Shifters ROHSonsemiTranslators, Level ShiftersAP2303N-VB
SOT-23(TO-236)MOSFETsVBsemi ElecFT2232HQ
QFN64Dual High Speed USB To Multipurpose UART/FIFO ICFTDIUncategorisedXC7A100T-FGG484
UncategorisedAMD/XILINXDMG2301L
SOT-23-55℃~+150℃ 1 P-Channel 1.2V 1.5W 150mΩ@2.5V 20V 3A 5.5nC@4.5V P-Channel SOT-23 MOSFETs ROHSDiodes IncorporatedMOSFETsASTMLPE-18-100.000MHZ-LJ-E-T
SMD3225-4PProgrammable OscillatorsAbracon
Parts
281| Qty | Value | Footprint | References |
|---|---|---|---|
| 25 | 200nF | Capacitor_SMD:C_0603_1608Metric | C53, C54, C55, C56, C57, C59, C60, C61, C62, C63, C81, C83, C101, C102, C103, C104 +9 |
| 16 | 1k x4 | FuzzyDuck:Resistor_Array_4x0503 | RN1, RN2, RN3, RN4, RN5, RN6, RN7, RN8, RN9, RN10, RN11, RN12, RN13, RN14, RN15, RN16 |
| 16 | R_Small | Capacitor_SMD:C_0603_1608Metric | R73, R74, R75, R76, R77, R78, R79, R80, R81, R82, R83, R84, R85, R86, R87, R89 |
| 15 | 47k | Resistor_SMD:R_0603_1608Metric | R18, R19, R20, R21, R22, R23, R24, R25, R33, R34, R35, R42, R43, R70, R71 |
| 14 | 0.47uF | Capacitor_SMD:C_0603_1608Metric | C23, C25, C26, C28, C30, C31, C32, C35, C97, C98, C99, C100, C105, C106 |
| 13 | 100nF | Capacitor_SMD:C_0603_1608Metric | C2, C5, C66, C68, C70, C71, C72, C73, C75, C79, C80, C82, C95 |
| 12 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C9, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C21 |
| 8 | 100uF | Capacitor_SMD:C_Elec_6.3x5.8 | C22, C27, C40, C42, C43, C44, C48, C50 |
| 7 | 100 | Resistor_SMD:R_0603_1608Metric | R48, R49, R54, R55, R56, R60, R61 |
| 7 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R10, R31, R38, R40 |
| 7 | 10nF | Capacitor_SMD:C_0603_1608Metric | C3, C6, C65, C67, C69, C76, C77 |
| 7 | 10uF | Capacitor_SMD:C_0603_1608Metric | C49, C52, C74, C78, C84, C85, C86 |
| 7 | 1k x4 | Resistor_SMD:R_Cat16-4 | RN17, RN18, RN19, RN20, RN21, RN22, RN23 |
| 6 | 1k | Resistor_SMD:R_0603_1608Metric | R6, R52, R53, R57, R58, R59 |
| 6 | DMG2301L | Package_TO_SOT_SMD:SOT-23 | Q2, Q3, Q4, Q5, Q6, Q7 |
| 6 | MMSZ4678-TPMSCT-ND | Diode_SMD:D_SOD-123 | D5, D6, D7, D8, D10, D11 |
| 5 | 4.7k | Resistor_SMD:R_0603_1608Metric | R9, R44, R47, R50, R51 |
| 5 | 5.6nF | Capacitor_SMD:C_0603_1608Metric | C41, C45, C46, C47, C51 |
| 5 | Conn_01x01_Male | Connector:Banana_Jack_1Pin | J11, J12, J13, J19, J20 |
| 5 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J14, J15, J16, J21, J22 |
| 5 | NCP59744-DFN10 | Package_DFN_QFN:DFN-10-1EP_3x3mm_P0.5mm_EP1.7x2.5mm | U3, U6, U7, U8, U9 |
| 4 | 220 | Resistor_SMD:R_0603_1608Metric | R7, R8, R12, R17 |
| 4 | 50 | Resistor_SMD:R_0603_1608Metric | R65, R66, R67, R68 |
| 4 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_2x01_P2.54mm_Vertical | J7, J8, J9, J10 |
| 4 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | J3, J4, J5, J6 |
| 4 | NLSX3018 | FuzzyDuck:ON_Semiconductor-517AK-01-11_2006-O-MFG | U12, U13, U14, U15 |
| 3 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C36, C38, C39 |
| 3 | LED_Small | LED_SMD:LED_0603_1608Metric | D1, D2, D9 |
| 2 | 1.8k | Resistor_SMD:R_0603_1608Metric | R63, R64 |
| 2 | 12.5k | Resistor_SMD:R_0603_1608Metric | R32, R41 |
| 2 | 15pF | Capacitor_SMD:C_0603_1608Metric | C20, C24 |
| 2 | 20pF | Capacitor_SMD:C_0603_1608Metric | C7, C8 |
| 2 | 4.7uF TA | Capacitor_SMD:C_0603_1608Metric | C1, C4 |
| 2 | 5k | Resistor_SMD:R_0603_1608Metric | R30, R39 |
| 2 | 600R/100MHz | Resistor_SMD:R_0603_1608Metric | L1, L2 |
| 2 | LED | LED_SMD:LED_0603_1608Metric | D3, D4 |
| 2 | M.2_Socket_M | FuzzyDuck:m.2 | J25, J29 |
| 1 | 1.13k | Resistor_SMD:R_0603_1608Metric | R37 |
| 1 | 12 MHz | Crystal:Crystal_SMD_HC49-SD | Y1 |
| 1 | 12k | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 2.2k | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 2.5k | Resistor_SMD:R_0603_1608Metric | R28 |
| 1 | 200 | Resistor_SMD:R_0603_1608Metric | R62 |
| 1 | 240 | Resistor_SMD:R_0603_1608Metric | R69 |
| 1 | 3.3k | Resistor_SMD:R_0603_1608Metric | R45 |
| 1 | 4.53k | Resistor_SMD:R_0603_1608Metric | R36 |
| 1 | 49.9 | Resistor_SMD:R_0603_1608Metric | R46 |
| 1 | 68 | Resistor_SMD:R_0603_1608Metric | R88 |
| 1 | 74LX1G00 | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | AP2303 | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm_ThermalVias | U10 |
| 1 | ASTMLPE-18-100.000MHZ-LJ-E-T | FuzzyDuck:ABRACON_ASFLMB | X1 |
| 1 | ASTMLPE-18-133.333MHZ-LJ-E-T | FuzzyDuck:ABRACON_ASFLMB | X2 |
| 1 | AT93C66C | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | ATX-24 | Connector_Molex:Molex_Mini-Fit_Jr_5566-24A2_2x12_P4.20mm_Vertical | J2 |
| 1 | Conn_01x05_Male | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J30 |
| 1 | Conn_01x06_Male | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J32 |
| 1 | Conn_02x03_Counter_Clockwise | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J33 |
| 1 | Conn_02x16_Counter_Clockwise | Connector_PinHeader_2.54mm:PinHeader_2x16_P2.54mm_Vertical | J31 |
| 1 | FT2232HQ | FuzzyDuck:VQFN-56-ftdi2232h-56q | U2 |
| 1 | LOGO | FuzzyDuck:logo3 | G*** |
| 1 | MT25Q128-8-ESF_SO16 | Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm | U16 |
| 1 | MT41K512M8DA-107P | FuzzyDuck:Micron-DA-0-0-0 | U17 |
| 1 | SWITCH_DP3T | FuzzyDuck:JS203011SCQN | U5 |
| 1 | SW_SPDT | Button_Switch_SMD:SW_SPDT_CK-JS102011SAQN | SW1 |
| 1 | SW_SPST | FuzzyDuck:FSM4JSMATR | SW2 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex_47346-0001 | J1 |
| 1 | XC7A100T-FGG484 | FuzzyDuck:Xilinx_FGG484.p2d | U11 |
The 271 most common of 281 parts.
More from Jegeva/FuzzyDuck
2- 6 layers100 × 86.5 mm

- 2 layers100 × 86.5 mm

Similar boards
- 6 layers50 × 75 mm

Ecp5u85-bse usb
open-ephys/ECP5U85-BSE-USB
USB development board featuring USB3.0, Lattice ECP5U85 FPGA, and Samtec BSE GPIO Headers
223 parts10 - 6 layers144.7 × 92.3 mm

- 8 layers65 × 56 mm

RPi HwAB-1
prestofuoco/RPi-HwAB
raspberry pi 5 hardware acceleration hat+ over pcie using xc7a
149 parts1MIT - 4 layers210.7 × 85 mm

- 4 layers57 × 22.5 mm

NB3 hindbrain
NoBlackBoxes/LastBlackBox
A course for brains interested in brains (not tools interested in tools)
147 parts69 - 6 layers60.6 × 100 mm

Gecko5education
logisim-evolution/GECKO5Education
Openhardware educational platform based on the ideas of the ulx3s and Gecko4Education
311 parts18MIT - 4 layers80.1 × 78.6 mm

Gb fpga
blazer82/gb.fpga
FPGA-based handheld console that plays games from Gameboy cartridges
151 parts12 - 4 layers68 × 43 mm

Questions
How big is the FuzzyDuck PCB?
It measures 100 × 139 mm and has 6 copper layers, 1.2 mm thick.
What parts does the FuzzyDuck use?
281 parts, built around the NLSX3018DT, AP2303N-VB, FT2232HQ and XC7A100T-FGG484. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the FuzzyDuck KiCad files?
From the Jegeva/FuzzyDuck repository on GitHub, at the commit this page was made from: the board is hardware/FD/FD.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the FuzzyDuck design in my own project?
Its repository states no licence, so its author keeps all rights: ask Jegeva before reusing the design.