
Ecp5u85-bse usb io tester
open-ephys/ECP5U85-BSE-USB
USB development board featuring USB3.0, Lattice ECP5U85 FPGA, and Samtec BSE GPIO Headers

USB development board featuring USB3.0, Lattice ECP5U85 FPGA, and Samtec BSE GPIO Headers
Ecp5u85-bse usb is an open-source printed circuit board by open-ephys, from the open-ephys/ECP5U85-BSE-USB repository on GitHub. It is a 6-layer board of 50 × 75 mm with 223 parts on 331 nets, routed with 7,532 tracks and 1,184 vias.
It is built around the LFE5U-85F-6BG381C, LTM8051IY and W25Q128JVPIQ, with the ECMF02-4CMX8, ECMF04-4HSWM10 and NLSX3018DT among its other parts. Its parts include 131 capacitors, 44 resistors, 11 diodes, 10 ICs and 5 connectors. It belongs with the fPGA and programmable logic boards and the FPGA and CPLD boards of this library.

| Qty | Value | Footprint | References |
|---|---|---|---|
| 49 | 100n | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C33, C35, C37, C39, C43, C100, C101, C108, C111, C112, C115, C116, C117 +33 |
| 11 | 10nF | Capacitor_SMD:C_0402_1005Metric | C9, C11, C12, C14, C15, C16, C21, C23, C25, C26, C28 |
| 10 | 10u | Capacitor_SMD:C_0805_2012Metric | C64, C68, C74, C75, C87, C93, C98, C106, C110, C114 |
| 9 | 100nF | Capacitor_SMD:C_0402_1005Metric | C10, C13, C17, C20, C22, C24, C27, C29, C31 |
| 7 | 10K | Resistor_SMD:R_0402_1005Metric | R29, R30, R31, R32, R33, R34, R39 |
| 7 | 470n | Capacitor_SMD:C_0402_1005Metric | C42, C44, C46, C48, C52, C54, C56 |
| 6 | 100u | Capacitor_SMD:C_0805_2012Metric | C119, C120, C123, C124, C126, C127 |
| 6 | 10n | Capacitor_SMD:C_0402_1005Metric | C4, C66, C67, C72, C107, C109 |
| 6 | 1K | Resistor_SMD:R_0402_1005Metric | R11, R12, R13, R14, R23, R25 |
| 6 | 22u | Capacitor_SMD:C_1210_3225Metric | C63, C73, C86, C97, C105, C113 |
| 6 | 4.7k | Resistor_SMD:R_0402_1005Metric | R8, R9, R10, R17, R21, R22 |
| 5 | 1u | Capacitor_SMD:C_0603_1608Metric | C88, C103, C104, C121, C125 |
| 5 | 22p | Capacitor_SMD:C_0402_1005Metric | C118, C122, C128, C130, C131 |
| 5 | LED_GREEN | LED_SMD:LED_0603_1608Metric | D2, D4, D5, D6, D7 |
| 5 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP2, TP3, TP4, TP5, TP6 |
| 4 | 0 | Resistor_SMD:R_0402_1005Metric | R1, R20, R45, R48 |
| 4 | 1uF | Capacitor_SMD:C_0603_1608Metric | C18, C19, C30, C40 |
| 4 | 6800p | Capacitor_SMD:C_0402_1005Metric | C32, C34, C36, C38 |
| 4 | DNP | Resistor_SMD:R_0402_1005Metric | R35, R36, R46, R47 |
| 3 | BLM15AG601SN1D | Inductor_SMD:L_0402_1005Metric | L1, L2, L3 |
| 3 | PMEG3030EP,115 | Diode_SMD:D_SOD-128 | D8, D9, D10 |
| 2 | 100u | Capacitor_Tantalum_SMD:CP_EIA-6032-15_Kemet-U_Pad2.25x2.35mm_HandSolder | C71, C102 |
| 2 | 10k | Resistor_SMD:R_0402_1005Metric | R18, R19 |
| 2 | 18p | Capacitor_SMD:C_0402_1005Metric | C61, C62 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R15, R16 |
| 2 | 22uF | Capacitor_SMD:C_1210_3225Metric | C7, C8 |
| 2 | 4.7u | Capacitor_SMD:C_0805_2012Metric | C41, C51 |
| 2 | 50 | Resistor_SMD:R_0402_1005Metric | R26, R27 |
| 2 | BSE-040-01-X-D-A | jonnew:SAMTEC_BSE-040-01-X-D-A | J1, J2 |
| 2 | LED_RED | LED_SMD:LED_0603_1608Metric | D1, D3 |
| 2 | LOGO | LOGO | G***, G*** |
| 2 | R_US | Resistor_SMD:R_0402_1005Metric | R38, R40 |
| 1 | jonnew-eagle:OE-LOGO-14X10 | ||
| 1 | 1.6k | Resistor_SMD:R_0402_1005Metric | R37 |
| 1 | 10p | Capacitor_SMD:C_0402_1005Metric | C129 |
| 1 | 118k | Resistor_SMD:R_0402_1005Metric | R50 |
| 1 | 24.9k | Resistor_SMD:R_0402_1005Metric | R44 |
| 1 | 240 | Resistor_SMD:R_0402_1005Metric | R24 |
| 1 | 375k | Resistor_SMD:R_0402_1005Metric | R43 |
| 1 | 4.7K | Resistor_SMD:R_0402_1005Metric | R28 |
| 1 | 40.2k | Resistor_SMD:R_0402_1005Metric | R41 |
| 1 | 665k | Resistor_SMD:R_0402_1005Metric | R42 |
| 1 | 78.7k | Resistor_SMD:R_0402_1005Metric | R49 |
| 1 | ABM8G-30.000MHZ-18-D2Y-T | Crystal:Crystal_SMD_Abracon_ABM8G-4Pin_3.2x2.5mm | Y1 |
| 1 | Barrel_Jack_Switch | Connector_BarrelJack:BarrelJack_CUI_PJ-102AH_Horizontal | J5 |
| 1 | ECMF02-4CMX8 | jonnew:ST_MICROQFN-8L-2.5x1.15x0.45 | U5 |
| 1 | ECMF04-4HSWM10 | jonnew:ST_QFN10L-2.6x1.35x0.5 | U6 |
| 1 | FT600Q-B-x | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP5.6x5.6mm | U7 |
| 1 | G*** | kibuzzard-623B3B2E | kibuzzard-623B3B2E |
| 1 | G*** | kibuzzard-6234B8C8 | kibuzzard-6234B8C8 |
| 1 | G*** | kibuzzard-6234B857 | kibuzzard-6234B857 |
| 1 | G*** | kibuzzard-623B3E4D | kibuzzard-623B3E4D |
| 1 | G*** | kibuzzard-623B3E64 | kibuzzard-623B3E64 |
| 1 | GBLC08C | Diode_SMD:D_SOD-323 | D11 |
| 1 | JTAG | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Horizontal | J3 |
| 1 | LFE5U-85F-6BG381 | jonnew:LATTICE_caBGA-381_17.0x17.0mm | U1 |
| 1 | LTC4360-2 | Package_TO_SOT_SMD:SC-70-8 | U8 |
| 1 | LTM8051 | jonnew:LINEAR_LTM8051 | U9 |
| 1 | MH2029-221Y | Inductor_SMD:L_0805_2012Metric | L4 |
| 1 | MT41K64M16TW-x | jonnew:MICRON_BGA96-10.5x8x1.3 | U4 |
| 1 | NLSX3018 | jonnew:ONSEMI_UDFN20-P0.4-4.0x2.0 | U10 |
| 1 | Q_NMOS_GSD | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | SiT9120AC-2C2-25E100.000000X | jonnew:SITIME_LGA6-5x3.2x0.75 | U2 |
| 1 | USB3_B_micro | jonnew:HIROSE_ZX360D-B-10P | J4 |
| 1 | W25Q128JVP | jonnew:WINBOND_WSON8-6x5x0.75 | U3 |
| 1 | ZXMC3A16DN8 | Package_SO:SO-8_3.9x4.9mm_P1.27mm | Q2 |
| 1 | ~{FPGA_RESET} | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
The 222 most common of 223 parts.

open-ephys/ECP5U85-BSE-USB
USB development board featuring USB3.0, Lattice ECP5U85 FPGA, and Samtec BSE GPIO Headers




OpenElectronicsLab/OpenHardwareExG
The OpenHardwareExG is a platform for ECG, EEG, EMG, ENG, EOG, and evoked potential applications. http://openelectronicslab.github.io/OpenHardwareExG/

OpenElectronicsLab/OpenHardwareExG_Shield
Arduino shield OpenHardwareExG

CYP4502D6/DCJ11CoreBoard
PDP-11 replica project based on the DEC DCJ-11 chipset, utilizing FPGA as bus controller and peripheral emulator, using external SRAM to provide system memory

openconcepts-ar/accel2d
This project aims to provide a graphics server system based on hardware accelerated graphics, and a easy way to develop the graphics primitives.

benwys/SparrowHawk
Open source flight controller for FPV drones. Includes two complete hardware designs (kicad) with production files. Will include custom firmware (bare-metal cpp). In progress :-)
It measures 50 × 75 mm and has 6 copper layers, 1.62 mm thick.
223 parts, built around the LFE5U-85F-6BG381C, LTM8051IY, W25Q128JVPIQ and ECMF02-4CMX8. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the open-ephys/ECP5U85-BSE-USB repository on GitHub, at the commit this page was made from: the board is pcb/ecp5u85-bse-usb.kicad_pcb and its schematic pcb/FPGA.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask open-ephys before reusing the design.