
ISOpower complete bothboards
practable/iso-power-pcb
Remote power control board for ISO experiment containers, used for remote labs projects

Remote power control board for ISO experiment containers, used for remote labs projects
ISOpower is an open-source printed circuit board by practable, from the practable/iso-power-pcb repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 119.4 × 99.1 mm with 159 parts on 132 nets, routed with 1,374 tracks and 274 vias.
It is built around the ATMEGA328PB-MN, CH340C and LM2596S-5.0, with the HEF4093BT, BC817 and IRF5305PBF among its other parts. Its parts include 40 resistors, 22 connectors, 21 capacitors, 18 transistors and 12 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Remote power control board for ISO experiment containers, used for remote labs projects

To Program AtMega328pb use the following settings:

| Qty | Value | Footprint | References |
|---|---|---|---|
| 21 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23, R35, R36 +5 |
| 10 | BC817 | Package_TO_SOT_SMD:SOT-23 | Q9, Q10, Q11, Q12, Q13, Q14, Q15, Q16, Q17, Q18 |
| 9 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C11, C12, C15, C16, C22, C23, C24, C30 |
| 6 | 220r | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R27, R28, R31, R32, R33, R34 |
| 6 | IRF5305_PBF | Package_TO_SOT_SMD:TO-263-2 | Q1, Q4, Q5, Q6, Q7, Q8 |
| 5 | Net_Tie | NetTie:NetTie-2_SMD_Pad0.5mm | N3, N5, N7, N9, N10 |
| 5 | USB_CH_A | Connector_USB:USB_A_Molex_67643_Horizontal | J9, J10, J11, J12, J13 |
| 5 | XT30_connector_DC_30A_female | Connector_AMASS:AMASS_XT30PW-F_1x02_P2.50mm_Horizontal | J14, J15, J16, J17, J18 |
| 4 | 560r | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1a1, R2b1, R3a1, R3b1 |
| 4 | TL431DBZ | Package_TO_SOT_SMD:SOT-23 | U15, U16, U17, U18 |
| 3 | 100u | Capacitor_SMD:CP_Elec_6.3x7.7 | C9, C10, C21 |
| 3 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H7, H8, H9 |
| 2 | 1n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C17, C18 |
| 2 | 22p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7, C8 |
| 2 | 22u | Capacitor_SMD:CP_Elec_6.3x5.4 | C13, C14 |
| 2 | 330r | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R4 |
| 2 | 470r | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1b1, R4b1 |
| 2 | ACS712xLCTR-30A | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U6, U7 |
| 2 | GREEN | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D5, D6 |
| 2 | RED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D7, D8 |
| 2 | Si2319CDS | Package_TO_SOT_SMD:SOT-23 | Q2, Q3 |
| 2 | i6A4W020A-DC-DC-250W | ISOpower:i6A4W-DIP | U4, U5 |
| 1 | 10uH | Inductor_SMD:L_0805_2012Metric_Pad1.05x1.20mm_HandSolder | L1 |
| 1 | 12V_BUS | TestPoint:TestPoint_Pad_D1.5mm | TP4 |
| 1 | 12V_MONITOR | TestPoint:TestPoint_Pad_D1.5mm | TP9 |
| 1 | 12vTerminal | TerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mm | J22 |
| 1 | 16MHz | Crystal:Crystal_SMD_Abracon_ABM3C-4Pin_5.0x3.2mm | Y1 |
| 1 | 1M | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8 |
| 1 | 1N5821 | Diode_SMD:D_SMA | D3 |
| 1 | 20A | Fuse:Fuseholder_Cylinder-5x20mm_Stelvio-Kontek_PTF78_Horizontal_Open | F1 |
| 1 | 220u | Capacitor_SMD:CP_Elec_6.3x7.7 | C20 |
| 1 | 24V_BUS | TestPoint:TestPoint_Pad_D1.5mm | TP2 |
| 1 | 24vTerminal | TerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mm | J21 |
| 1 | 2k0 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4a1 |
| 1 | 2k2 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2a1 |
| 1 | 2x2_ISOpower_mountingHoles | MountingHole:ISOpower_4xmounting_M3 | H11 |
| 1 | 33uH | Inductor_SMD:L_12x12mm_H8mm | L2 |
| 1 | 3V3_BUS | TestPoint:TestPoint_Pad_D1.5mm | TP3 |
| 1 | 3V3_spare | Connector_PinHeader_1.27mm:PinHeader_1x01_P1.27mm_Vertical | J30 |
| 1 | 4n7 | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C25 |
| 1 | 5V_BUS | TestPoint:TestPoint_Pad_D1.5mm | TP5 |
| 1 | 5V_BUS_TRIM | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R6 |
| 1 | 5V_MONITOR | TestPoint:TestPoint_Pad_D1.5mm | TP10 |
| 1 | 5vTerminal | TerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mm | J23 |
| 1 | 680u | Capacitor_THT:C_Radial_D12.5mm_H20.0mm_P5.00mm | C19 |
| 1 | ATmega328PB-M | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.1x3.1mm | U3 |
| 1 | AVR-ISP-6 | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J8 |
| 1 | AtMega_Reset | TestPoint:TestPoint_Pad_D1.5mm | TP6 |
| 1 | BUS_A_trim | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R7 |
| 1 | BZV55B18 | Diode_SMD:D_MiniMELF_Handsoldering | D1 |
| 1 | Blue | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
| 1 | CH340C | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U8 |
| 1 | CH340_UD+ | TestPoint:TestPoint_Pad_D1.5mm | TP8 |
| 1 | CH340_UD- | TestPoint:TestPoint_Pad_D1.5mm | TP7 |
| 1 | DSBL_BYPSS_A | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP3 |
| 1 | DSBL_BYPSS_B | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2 |
| 1 | Fan_IEC60617 | ISOpower:Fan12V_40by10.5mm | M1 |
| 1 | GND | TestPoint:TestPoint_Pad_D1.5mm | TP1 |
| 1 | HEF4093B | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U19 |
| 1 | LM2596S-5 | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U10 |
| 1 | LOGO | 000_Graphics_Immo:practactable.io_text_20x8 | G*** |
| 1 | LOGO | 000_Graphics_Immo:practactable.io_text_30x11_SM | G*** |
| 1 | Net_Tie | NetTie:NetTie-8-15A_1oz_2oz_long | N8 |
| 1 | Net_Tie | NetTie:NetTie-8-15A_1oz_2oz | N6 |
| 1 | OP_0 | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP4 |
| 1 | OP_1 | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP5 |
| 1 | OP_2 | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP6 |
| 1 | OP_3 | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP7 |
| 1 | OP_4 | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP8 |
| 1 | PRTR5V0U2X | Package_TO_SOT_SMD:SOT-143 | D4 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_EVQPE1 | SW1 |
| 1 | USB_5v | Connector_PinHeader_1.27mm:PinHeader_1x01_P1.27mm_Vertical | J26 |
| 1 | USB_B_Mini | Connector_USB:USB_Mini-B_Lumberg_2486_01_Horizontal | J31 |
| 1 | XT60_connector_DC_60A_male | Connector_AMASS:AMASS_XT60PW-M | J1 |
| 1 | adc_spare | Connector_PinHeader_1.27mm:PinHeader_1x02_P1.27mm_Vertical | J25 |
| 1 | dio_spare | Connector_PinHeader_1.27mm:PinHeader_1x01_P1.27mm_Vertical | J24 |
| 1 | prog_power_select | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm_NumberLabels | JP1 |
| 1 | prog_power_select | Connector_PinHeader_1.27mm:PinHeader_1x03_P1.27mm_Vertical | J6 |
| 1 | pwr_tie | NetTie:NetTie-8-15A_1oz_2oz_chamf | N11 |
| 1 | wifi_header | Connector_PinSocket_1.27mm:PinSocket_1x10_P1.27mm_Vertical | J29 |

practable/iso-power-pcb
Remote power control board for ISO experiment containers, used for remote labs projects

practable/iso-power-pcb
Remote power control board for ISO experiment containers, used for remote labs projects

practable/iso-power-pcb
Remote power control board for ISO experiment containers, used for remote labs projects





TheTesla/fuse-iur
electronic fuse with over voltage, over current and reverse polarity protection

practable/supervisor-pcb
Allow students to program a remote labs experiment themselves, while protecting hardware from damage due to misfunction


JakobThiessen/NixieClock
Wichtig: Ohne Änderung tut die SD karte nicht. (Betrifft nur V2.0 in der V2.1 sind die Änderung im Layout schon umgesetzt)
It measures 119.4 × 99.1 mm and has 4 copper layers, 4.69 mm thick.
159 parts, built around the ATMEGA328PB-MN, CH340C, LM2596S-5.0 and HEF4093BT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the practable/iso-power-pcb repository on GitHub, at the commit this page was made from: the board is ISOpowerPCB/ISOpower.kicad_pcb and its schematic Backup/ISOpower_complete_bothboards/5to12_logic.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).