

LGGHP Corp.
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 16
- Pads
- 75
- Tracks, vias
- 137, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 15 Feb 2017
- Updated
- 27 Apr 2017
Overview
VCO is an open-source printed circuit board by ppff, from the ppff/LGGHP-Analog-Synth-PCB repository on GitHub. It is a 2-layer board with 21 parts on 16 nets, routed with 137 tracks and 0 vias.
It is built around the LM324 and AD5761RBCP. Its parts include 7 resistors, 6 capacitors, 1 IC, 1 transistor and 1 switch.
Main components
2Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100nF | Capacitors_ThroughHole:C_Axial_L5.1mm_D3.1mm_P7.50mm_Horizontal | C1, C3, C4, C5, C6 |
| 3 | 100k | Resistors_ThroughHole:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R6, R7 |
| 3 | 47k | Resistors_ThroughHole:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R3, R4 |
| 1 | 10nF | Capacitors_ThroughHole:C_Axial_L5.1mm_D3.1mm_P7.50mm_Horizontal | C2 |
| 1 | 33k | Resistors_ThroughHole:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5 |
| 1 | AD5761R | Housings_SSOP:TSSOP-16_4.4x5mm_Pitch0.65mm | AD1 |
| 1 | Bornier | bornier:Bornier_3pins | B1 |
| 1 | Bornier_OUT | bornier:Bornier_3pins | B2 |
| 1 | Header_left | Pin_Headers:Pin_Header_Straight_1x05_Pitch2.54mm | H1 |
| 1 | LM324 | Housings_DIP:DIP-14_W7.62mm | U1 |
| 1 | Q_NMOS_SGD | TO_SOT_Packages_THT:TO-92_Inline_Wide | Q1 |
| 1 | SWITCH_INV | switch:switch | SW1 |
| 1 | TEST | test:test | I1 |
More from ppff/LGGHP-Analog-Synth-PCB
1- 2 layers

Similar boards
- 4 layers140 × 100 mm

- 4 layers99 × 53.3 mm

PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0 - 2 layers36.8 × 34.7 mm

Tinylab proto1
espotek-org/Labrador
EspoTek Labrador is a USB device that transforms your PC or smartphone into a fully-featured electronics lab. This repo holds all of the source code!
79 parts1.2k - 4 layers82.6 × 82.5 mm

- 2 layers231.1 × 106.7 mm

- 4 layers82.6 × 82.6 mm

- 4 layers72.4 × 95.3 mm

DingoPDM
corygrant/dingoPDM
Hardware - dingoPDM is an open source, affordable automotive PDM (Power Distribution Module). Pre-assembled and tested units are available or the design can be used to build a DIY version.
156 parts128MIT - 2 layers191.5 × 76 mm

Pcb project
CrashOverride85/zc95
4 channel EStim box inspired by the mk312bt, with Lua scripting support
337 parts117GPL-3.0
Questions
What parts does the VCO use?
21 parts, built around the LM324 and AD5761RBCP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the VCO KiCad files?
From the ppff/LGGHP-Analog-Synth-PCB repository on GitHub, at the commit this page was made from: the board is VCO/VCO.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the VCO design in my own project?
Its repository states no licence, so its author keeps all rights: ask ppff before reusing the design.