
MP Tracker
elektra42/freifunk-open-mppt
Open hard- and software solar maximum power point tracker

Повышайка для газоразрядных ламп 12 -> 200 В
NixiePowerSupply is an open-source printed circuit board by popovb, from the popovb/NixiePowerSupply repository on GitHub, published under the WTFPL licence. It is a 2-layer board of 41.5 × 41.5 mm with 22 parts on 9 nets, routed with 69 tracks and 1 via.
It is built around the MC34063. Its parts include 4 capacitors, 4 resistors, 2 diodes, 2 transistors and 2 connectors.

| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | DG301-5.0-2P | Library:DG301-5.0-2P-1X | J1, J2 |
| 1 | 0.01uF, 0805 | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 1 | 0.33, 0805 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 1K, 0805 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 1N4148 1N914, DO-35 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D2 |
| 1 | 2.2uF 250V Polar 6.3x2.5 | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C4 |
| 1 | 2200pF, 0805 | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 220uF 16V LESR Polar 6.3x2.5 | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C1 |
| 1 | 220uH, 12x12 | Inductor_SMD:L_12x12mm_H8mm | L1 |
| 1 | 3K, 1% | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4 |
| 1 | 470K, 1% | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
| 1 | IRF740, TO-220 | Package_TO_SOT_THT:TO-220-3_Vertical | Q1 |
| 1 | LOGO | Library:logo | G*** |
| 1 | MC34063 | Package_DIP:DIP-8_W7.62mm | U1 |
| 1 | MPSA56, TO-92 | Package_TO_SOT_THT:TO-92_Inline | Q2 |
| 1 | UF4004 UF4007, DO-41 | Diode_THT:D_DO-41_SOD81_P7.62mm_Horizontal | D1 |
The 17 most common of 22 parts.

elektra42/freifunk-open-mppt
Open hard- and software solar maximum power point tracker

noisebridge/rfid-access-control
Little system to handle RFID access control at Noisebridge



MattisLind/teleprinterHat
A RaspberryPi HAT that interfaces a old school teleprinter


daumemo/DIY-ESP-12E-LED-Strip-Controller-4-Channel
DIY LEd Strip Controller with ESP-12E

JeanRenier/Remoting-a-microBIT-X
A set of ESP32 based controllers to remote a µBIT-X transceiver over the internet
It measures 41.5 × 41.5 mm and has 2 copper layers, 1.6 mm thick.
22 parts, built around the MC34063. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the popovb/NixiePowerSupply repository on GitHub, at the commit this page was made from: the board is NixiePowerSupply.kicad_pcb and its schematic NixiePowerSupply.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the WTFPL licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).