Skip to the content
2 layers12.5 × 11 mmAmbient, the printed circuit board in 3D

Xihe is a self-sustaining, ultra-low-power sensing platform designed for long-lifetime deployments with zero maintenance.

Size
12.5 × 11 mm
Copper layers
2
Thickness
0.8 mm
Parts
9
Nets
12
Pads
39
Tracks, vias
32, 16
Pours
3
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
7 Aug 2025
Updated
1 Sep 2025

Overview

Ambient is an open-source printed circuit board by PolygonHJ, from the PolygonHJ/xihe repository on GitHub. It is a 2-layer board of 12.5 × 11 mm with 9 parts on 12 nets, routed with 32 tracks and 16 vias.

It is built around the HDC2010YPAR and OPT3002DNPR. Its parts include 3 resistors, 2 capacitors, 2 ICs, 1 connector and 1 switch.

Main components

2

README

README.md

Xihe

Xihe is a self-sustaining, ultra-low-power sensing platform designed for long-lifetime deployments with zero maintenance. Powered by ambient energy sources such as solar or background RF, the system stores energy in supercapacitors until it reaches a threshold sufficient to activate, sense, and transmit data wirelessly. Once depleted, it enters a dormant state and repeats the cycle.

The system is designed to be as small and unobtrusive as possible, enabling it to be placed in an environment, monitor passively, and be forgotten—both visually and in terms of maintenance.

System Overview

The platform consists of:

1. Main Board — "Xihe-Core"

  • Hosts the energy harvesting and power management circuitry,
  • Includes high-capacitance supercapacitor storage,
  • Integrates a Seeed XIAO nRF54L15 module for BLE/Zigbee communication,
  • Provides a modular connector interface for sensor boards (I²C, SPI, UART, Analogue),
  • Manages energy thresholds and system wakeup logic.

2. Sensor Modules

  • Plug-in sensor boards for flexibility,
  • Operate only during active energy windows to minimize load,
  • Interchangeable to allow flexibility in deployment.

3. Energy Storage Modules

  • Optional add-ons for extended runtime or energy reserve (Supercapacitors or Batteries),
  • Connect to the side or bottom of the board for flexibility,
  • Extend active life at the cost of increased physical size.

Features

  • ⚡ Ambient Energy Harvesting: Solar (single-cell) supported; RF harvesting planned,
  • 🔋 Supercapacitor-Based Power Storage: Maintenance-free,
  • 📡 Low-Power Wireless Comms: BLE/Zigbee-ready for periodic broadcast,
  • 🧩 Modular Sensing: Swappable sensor boards and energy modules for application-specific deployments,
  • 🔄 Cyclic Operation: Charge → Activate → Sense → Transmit → Sleep,
  • ♻️ Designed for Longevity: No batteries, no wires, no maintenance

Use Cases

The project is intended for low-effort, low-maintenance monitoring in home automation or other low-frequency sensing environments.

Example sensing applications:

  • Light
  • Temperature
  • Humidity
  • Moisture
  • Open/Close (e.g. reed switch)

Status

The hardware is under active development. No hardware for software has been produced or tested yet.

Future Ideas

  • Energy storage modules,
  • RF energy harvesting,
  • Modularise harvesting and energy storage sections.

Parts

9
QtyValueFootprintReferences
310kpassive:R_0402_1005MetricR1, R2, R3
21upassive:C_0402_1005MetricC1, C2
1HDC2010YPARgeneric:TI_6DSBGA_YPAU2
1MOLEX_SlimStack_505551-1020connectors:MOLEX_SlimStack_505551-1020J1
1OPT3002DNPRgeneric:TI_6USON_DNPU1
1ReedSW_NOpart_specific:COMUS_RI80SMDM0510J1SW1

More from PolygonHJ/xihe

2
  • 4 layers65 × 52.5 mmTemperatureSensor, the printed circuit board in 3D

    TemperatureSensor

    PolygonHJ/xihe

    Xihe is a self-sustaining, ultra-low-power sensing platform designed for long-lifetime deployments with zero maintenance.

    79 parts2
  • 2 layers23 × 33 mmCore, the printed circuit board in 3D

    Core

    PolygonHJ/xihe

    Xihe is a self-sustaining, ultra-low-power sensing platform designed for long-lifetime deployments with zero maintenance.

    29 parts2

Similar boards

  • 2 layers26 × 26 mmOpt3002 breakout, the printed circuit board in 3D

    Opt3002 breakout

    cda-tum/mmft-openSLAice

    Dedicated slicer for masked sterolithography (mSLA) 3D printing of microfluidic devices.

    9 parts15MIT
  • 4 layers84.4 × 68.2 mmPhenobottle sensorboard, the printed circuit board in 3D

    Phenobottle sensorboard

    Flynsky/phenobottle-sensorboard

    Phenobottle Sensor Board – A compact board for monitoring and controlling algae growth chambers, featuring pH, temperature, and light measurement frontends, a high-gain dual-stage transimpedance amplifier, a capacitive…

    160 parts
  • 4 layers58.4 × 53.9 mmSensorControlBoard, the printed circuit board in 3D

    SensorControlBoard

    nfe19/Sensor_Board

    A PCB board with firmware to control sensors

    89 parts
  • 2 layers55 × 32 mmHA Sensor Node, the printed circuit board in 3D

    HA Sensor Node

    AlexD717/HA-Sensor-Node

    Sensor node featuring a temperature, humidity, and mmWave sensor

    15 parts1
  • 2 layers89 × 44 mmPeanut, the printed circuit board in 3D

    Peanut

    WYVERN2742/Peanut

    Pinenut-01S BL602 Motherboard

    58 parts1
  • 4 layers42.9 × 16 mmWeather pill, the printed circuit board in 3D

    Weather pill

    freder202/weather_pill

    An ultra low power weather data logger

    66 parts
  • 2 layers133.3 × 39 mmNumitron clock, the printed circuit board in 3D

    Numitron clock

    mtlevine0/numitron-clock

    IV-9 & ESP32 based clock firmware and EDA

    64 parts
  • 2 layers76.5 × 78 mmEmonTH, the printed circuit board in 3D

    EmonTH

    openenergymonitor/emonTH3

    Hardware for the emonTH3 temperature, humidity, and pulse sensing node

    56 partsCC-BY-SA-4.0

Questions

How big is the Ambient PCB?

It measures 12.5 × 11 mm and has 2 copper layers, 0.8 mm thick.

What parts does the Ambient use?

9 parts, built around the HDC2010YPAR and OPT3002DNPR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Ambient KiCad files?

From the PolygonHJ/xihe repository on GitHub, at the commit this page was made from: the board is hardware/sense_ambient/ambient.kicad_pcb and its schematic hardware/core/core.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Ambient design in my own project?

Its repository states no licence, so its author keeps all rights: ask PolygonHJ before reusing the design.