

Elec Donut
Donut is electronic boarrd dedicated to the positionning and the initialization of Orbita 3d for Reachy 2
- Copper layers
- 4
- Thickness
- 1 mm
- Parts
- 94
- Nets
- 76
- Pads
- 312
- Tracks, vias
- 622, 86
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 7 Dec 2023
- Updated
- 23 Sep 2025
Overview
Elec Donut is an open-source printed circuit board by pollen-robotics, from the pollen-robotics/elec_Donut repository on GitHub, published under the Apache-2.0 licence. It is a 4-layer board with 94 parts on 76 nets, routed with 622 tracks and 86 vias.
It is built around the AS5047D and PCF8574ATS/3. Its parts include 29 resistors, 26 capacitors, 23 ICs, 2 diodes and 1 connector.
Main components
2AS5047D
14-Bit On-Axis Magnetic Rotary Position Sensor with 11-Bit Decimal and Binary Incremental Pulse CountOSRAMUncategorisedPCF8574ATS/3
LSSOP-20-175mil-40℃~+85℃ 100kHz 2.5V~6V 2.5uA 25mA 300uA 8 8 I2C Interrupt Output Reset function、Cascading and address extension、Built-in LED driver LSSOP-20-175mil I/O Expanders ROHSNXP SemiconductorsI/O Expanders
README
README.md"Donut" Electronic Board
"Donut" is dedicated to Orbita 3d, it gathers magnetic encoders and Hall effects for both positionning and initialization of Orbita. "Donut" inherits from Pacman, designed for Reachy 1.

Basically
- Designed with KiCAD 7.
Parts
94| Qty | Value | Footprint | References |
|---|---|---|---|
| 22 | 100nF 6V3 | Capacitor_SMD:C_0402_1005Metric | C3, C10, C11, C12, C13, C14, C15, C16, C17, C18, C21, C22, C23, C24, C25, C30 +6 |
| 17 | 10k | Resistor_SMD:R_0402_1005Metric | R10, R11, R12, R13, R14, R15, R16, R17, R18, R23, R24, R25, R26, R27, R28, R29 +1 |
| 16 | TMAG5123 | Package_TO_SOT_SMD:SOT-23 | U4, U5, U6, U7, U8, U9, U10, U11, U12, U13, U14, U15, U16, U17, U18, U23 |
| 4 | 620R | Resistor_SMD:R_0402_1005Metric | R1, R2, R19, R20 |
| 4 | TestPoint | TestPoint:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP1, TP2, TP3, TP5 |
| 3 | AS5047D | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U20, U21, U22 |
| 3 | DNP Fiducial | Fiducial:Fiducial_1mm_Mask2mm | FID1, FID2, FID3 |
| 2 | 0R | Resistor_SMD:R_0402_1005Metric | R4, R5 |
| 2 | 120R | Resistor_SMD:R_0402_1005Metric | R3, R21 |
| 2 | 1K | Resistor_SMD:R_0603_1608Metric | R6, R22 |
| 2 | 1uF 6V3 | Capacitor_SMD:C_0402_1005Metric | C2, C20 |
| 2 | 4.7uF 6V3 | Capacitor_SMD:C_0402_1005Metric | C1, C19 |
| 2 | 4k7 | Resistor_SMD:R_0402_1005Metric | R8, R9 |
| 2 | DNP - LocatingPinHole | Library_Pollen:MountingHole_2.0mm | H6, H7 |
| 2 | Green | LED_SMD:LED_0603_1608Metric | D1, D2 |
| 2 | MountingHole_Pad | MountingHole:MountingHole_2.7mm_M2.5_ISO14580_Pad_TopBottom | H1, H2 |
| 2 | PCF8574ATS | Package_SO:SSOP-20_4.4x6.5mm_P0.65mm | U2, U3 |
| 1 | DNP Logo Pollen 2021 | Library_Pollen:Logo_Pollen_2021_sq | H5 |
| 1 | LTC4331CUFD-PBF | Library_Pollen:LPQFN20_ADI | U1 |
| 1 | LTC4332CUFD-PBF | Library_Pollen:LPQFN20_ADI | U19 |
| 1 | TestPoint | TestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | TP4 |
| 1 | pico8 | Connector_Molex:Molex_PicoBlade_53398-0871_1x08-1MP_P1.25mm_Vertical | J2 |
Similar boards
- 4 layers188 × 90.2 mm

- 2 layers74.1 × 52 mm

Industrial mcp23017 input device v02
Pekaway/I2C-GPIO-extension
I2C Extension for the VAN PI CORE
74 parts1 - 2 layers

- 2 layers20.3 × 63 mm

BodyControllerForSX70z
ZeshuLiu/SX70z
SX-70 电子化机身主控 | Electronic Polaroid SX-70 Controller 基于 ESP32 的宝丽来 SX-70 相机控制模块,替换原装机头控制器。 支持自动测光曝光、B/T/手动模式、闪光灯同步、BLE+WiFi配网、OTA升级。 配备 128×32 OLED 机身控制器显示 EV 和快门速度,3D 按键交互。 Firmware: GPLv3 Hardware: CERN-OHL-S 2.0
22 parts10 - 2 layers24 × 85.2 mm

Controller body
ZeshuLiu/SX-70-Mk2
把板子上的U+ U- GND VCC焊到usb线上,连接电脑后可以当作树莓派Pico开发板进行操作,上传代码的参见这里(树莓派官网)。 \ 在将机身主控安装至机器内部之前需要将micropython固件及代码烧录至控制器中。后续可以通过机身控制器上的USB接口连接开发板并更新python代码。 将code根目录中的所有python文件上传至控制器(文件夹不需要),并且将gmain.py命名为…
31 parts2GPL-3.0 - 4 layers75 × 65 mm

CRImier MyKiCad vaio re
punkfab/pcb-corpus
235 real KiCad boards from open-source hardware repositories, prepared as a placement and routing benchmark
289 parts1 - 2 layers123 × 69 mm

ProyekOPSI2023
zeankundev/boards
A collection and an archive of KiCad projects I made. Contains projects from 2023 - 2024.
23 parts1 - 2 layers102.4 × 102.4 mm

Questions
What parts does the Elec Donut use?
94 parts, built around the AS5047D and PCF8574ATS/3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Elec Donut KiCad files?
From the pollen-robotics/elec_Donut repository on GitHub, at the commit this page was made from: the board is elec_Donut.kicad_pcb and its schematic elec_Donut.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Elec Donut design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).