
Elec Ventouse 2d
pollen-robotics/elec_Ventouse_2d
Power board for 2 BLDC motors. Paired with elec_Poulpe_2d

Power board for 3 BLDC motors. Paired with elec_Poulpe_3d
Elec Ventouse 3d is an open-source printed circuit board by pollen-robotics, from the pollen-robotics/elec_Ventouse_3d repository on GitHub, published under the Apache-2.0 licence. It is a 4-layer board of 45 × 64 mm with 145 parts on 136 nets, routed with 1,415 tracks and 316 vias.
It is built around the AP63203WU, AP63205WU and BSS123, with the BAT30KFILM among its other parts. Its parts include 50 resistors, 47 capacitors, 13 connectors, 8 diodes and 6 ICs. It belongs with the robots and motor control boards and the RP2040 boards of this library.
"Ventouse_3d" is build from "Themis" as it aims on driving Orbita 3 Dofs. It is paired with boards "Poulpe_3d" that controls 3 small BLDC Motors.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 4K7 | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R16, R17, R28, R41, R42, R51 |
| 7 | 10n 6V3 | Capacitor_SMD:C_0402_1005Metric | C4, C6, C7, C35, C45, C55, C65 |
| 6 | 100n 6V3 | Capacitor_SMD:C_0402_1005Metric | C32, C33, C34, C42, C51, C61 |
| 6 | 10k | Resistor_SMD:R_0402_1005Metric | R32, R37, R44, R47, R54, R57 |
| 6 | 22p 25V | Capacitor_SMD:C_0402_1005Metric | C43, C44, C46, C49, C56, C59 |
| 6 | 330R | Resistor_SMD:R_0402_1005Metric | R38, R39, R45, R46, R55, R56 |
| 6 | 4k7 | Resistor_SMD:R_0402_1005Metric | R4, R8, R9, R10, R11, R31 |
| 6 | DNP - TestPoint | Library_Pollen:TestPoint_THTPad_D1.0mm_Drill0.4mm | TP3, TP4, TP6, TP8, TP9, TP10 |
| 5 | 100n 50V | Capacitor_SMD:C_0402_1005Metric | C8, C23, C37, C48, C58 |
| 5 | 470R | Resistor_SMD:R_0402_1005Metric | R13, R14, R40, R43, R53 |
| 4 | 22u 6V3 | Capacitor_SMD:C_0603_1608Metric | C9, C10, C24, C25 |
| 4 | Red | LED_SMD:LED_0603_1608Metric | D6, D7, D9, D10 |
| 4 | SlimStack Plug 4mm | Library_Pollen:Molex_SlimStack_539160208 | J6, J8, J10, J12 |
| 3 | 0R | Resistor_SMD:R_0402_1005Metric | R33, R36, R52 |
| 3 | 10k_NTC | Resistor_SMD:R_0603_1608Metric | TH1, TH2, TH3 |
| 3 | 1u 16V | Capacitor_SMD:C_0402_1005Metric | C39, C50, C60 |
| 3 | 1u 6V3 | Capacitor_SMD:C_0402_1005Metric | C38, C53, C63 |
| 3 | 22R | Resistor_SMD:R_0402_1005Metric | R35, R48, R58 |
| 3 | 22k | Resistor_SMD:R_0402_1005Metric | R27, R34, R50 |
| 3 | 22u 10V | Capacitor_SMD:C_0603_1608Metric | C40, C54, C64 |
| 3 | 2u2 50V | Capacitor_SMD:C_1210_3225Metric | C36, C47, C57 |
| 3 | 47n 50V | Capacitor_SMD:C_0603_1608Metric | C41, C52, C62 |
| 3 | BSS123 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3 |
| 3 | DNP Fiducial | Fiducial:Fiducial_1mm_Mask2mm | FID1, FID2, FID3 |
| 3 | DRV8316R | Library_Pollen:VQFN-40-1EP_5x7mm_P0,5mm_EP3.8x5.8mm | U6, U7, U8 |
| 3 | MicroFit 3 | Library_Pollen:Micro-Fit_43650-0310_Horizontal | J7, J9, J11 |
| 3 | Pico 2 | Connector_Molex:Molex_PicoBlade_53398-0271_1x02-1MP_P1.25mm_Vertical | J1, J3, J14 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R21, R23 |
| 2 | 220u 35V | Capacitor_SMD:CP_Elec_10x10.5 | C30, C31 |
| 2 | 6,8u 2A | Inductor_SMD:L_Bourns_SRN6045TA | L2, L5 |
| 2 | 620m | Library_Pollen:R_2512W_Pad2.10x3.15mm | R25, R26 |
| 2 | MicroFit2 | Library_Pollen:Micro-Fit_43650-0210_Horizontal | J4, J5 |
| 2 | MountingHole_Pad | MountingHole:MountingHole_2.7mm_M2.5_ISO14580_Pad_TopBottom | H3, H4 |
| 2 | TVS diode | Diode_SMD:D_SMA | D4, D5 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R24 |
| 1 | 10u 63V | Capacitor_SMD:CP_Elec_6.3x7.7 | C26 |
| 1 | 150R | Resistor_SMD:R_0402_1005Metric | R30 |
| 1 | 20k | Resistor_SMD:R_0603_1608Metric | R22 |
| 1 | 470n 50V | Capacitor_SMD:C_0603_1608Metric | C29 |
| 1 | 75R | Resistor_SMD:R_0603_1608Metric | R20 |
| 1 | 75k | Resistor_SMD:R_0402_1005Metric | R29 |
| 1 | AP63203 | Package_TO_SOT_SMD:TSOT-23-6 | U3 |
| 1 | AP63205 | Package_TO_SOT_SMD:TSOT-23-6 | U4 |
| 1 | BAT30KFILM | Diode_SMD:D_SOD-523 | D8 |
| 1 | DNP - TestPoint_Alt | TestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | TP7 |
| 1 | DNP - pico3 | Connector_Molex:Molex_PicoBlade_53398-0371_1x03-1MP_P1.25mm_Vertical | J2 |
| 1 | DNP Logo Pollen 2021 | Library_Pollen:Logo_Pollen_2021_sq | H2 |
| 1 | Green | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | TL431DBZ | Package_TO_SOT_SMD:SOT-23 | U5 |

pollen-robotics/elec_Ventouse_2d
Power board for 2 BLDC motors. Paired with elec_Poulpe_2d

kinggh0stee/WellD
ESP32-C6 Zigbee well monitor — reads a 4–20 mA pressure transducer and DS18B20, reports water level, temperature, and battery to Zigbee2MQTT with OTA update support






It measures 45 × 64 mm and has 4 copper layers, 1.57 mm thick.
145 parts, built around the AP63203WU, AP63205WU, BSS123 and BAT30KFILM. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the pollen-robotics/elec_Ventouse_3d repository on GitHub, at the commit this page was made from: the board is elec_Ventouse_3d.kicad_pcb and its schematic driver_A.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).