
Elec Ventouse 3d
pollen-robotics/elec_Ventouse_3d
Power board for 3 BLDC motors. Paired with elec_Poulpe_3d

Power board for 2 BLDC motors. Paired with elec_Poulpe_2d
Elec Ventouse 2d is an open-source printed circuit board by pollen-robotics, from the pollen-robotics/elec_Ventouse_2d repository on GitHub, published under the Apache-2.0 licence. It is a 4-layer board of 50 × 65 mm with 131 parts on 110 nets, routed with 1,337 tracks and 471 vias.
It is built around the TMC6100-LA, AP63203WU and AP63205WU, with the BSZ034N04LS and BAT30KFILM among its other parts. Its parts include 49 capacitors, 36 resistors, 12 transistors, 8 ICs and 6 diodes. It belongs with the robots and motor control boards of this library.
"Ventouse_2d" is build from "Themis" as it aims on driving Orbita 2 Dofs. It is paired with boards "Poulpe_2d" that controls 2 BLDC Motors.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 10R | Resistor_SMD:R_0402_1005Metric | R5, R7, R8, R9, R11, R13, R14, R35, R36, R37, R38, R42 |
| 12 | BSZ034N04LS | Library_Pollen:PQFN_3.3x3.3mm_-_PG-TDSON-8_FL | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9, Q10, Q11, Q12 |
| 10 | 100n 6V3 | Capacitor_SMD:C_0402_1005Metric | C7, C12, C15, C28, C32, C34, C37, C46, C47, C48 |
| 8 | 100n 50V | Capacitor_SMD:C_0402_1005Metric | C5, C6, C11, C16, C17, C20, C22, C45 |
| 7 | 470n 50V | Capacitor_SMD:C_0603_1608Metric | C1, C13, C25, C27, C29, C30, C31 |
| 7 | 4k7 | Resistor_SMD:R_0402_1005Metric | R4, R17, R19, R20, R25, R29, R34 |
| 6 | 2u2 50V | Capacitor_SMD:C_1210_3225Metric | C14, C19, C33, C51, C52, C53 |
| 4 | 10m | Library_Pollen:Res_1206_ERJ8CWFR010V | R6, R10, R18, R24 |
| 4 | 1k | Resistor_SMD:R_0402_1005Metric | R21, R22, R27, R28 |
| 4 | 22u 6V3 | Capacitor_SMD:C_0603_1608Metric | C23, C24, C42, C43 |
| 4 | 2n2 50V | Capacitor_SMD:C_0402_1005Metric | C35, C36, C40, C41 |
| 4 | 2u2 10V | Capacitor_SMD:C_0603_1608Metric | C8, C9, C21, C26 |
| 4 | AD8418 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4, U5, U6, U8 |
| 3 | 620m | Library_Pollen:R_2512W_Pad2.10x3.15mm | R1, R2, R3 |
| 3 | DNP - TestPoint | Library_Pollen:TestPoint_THTPad_D1.0mm_Drill0.4mm | TP7, TP8, TP9 |
| 3 | DNP Fiducial | Fiducial:Fiducial_1mm_Mask2mm | FID1, FID2, FID3 |
| 3 | TVS diode | Diode_SMD:D_SMA | D1, D2, D3 |
| 2 | 10k_NTC | Resistor_SMD:R_0603_1608Metric | TH1, TH2 |
| 2 | 220u 35V | Capacitor_SMD:CP_Elec_10x10.5 | C2, C3 |
| 2 | 22K | Resistor_SMD:R_0402_1005Metric | R12, R16 |
| 2 | 22n 100V | Capacitor_SMD:C_0603_1608Metric | C18, C39 |
| 2 | 470R | Resistor_SMD:R_0402_1005Metric | R15, R46 |
| 2 | 6,8u 2A | Inductor_SMD:L_Bourns_SRN6045TA | L1, L2 |
| 2 | MicroFit 3 | Library_Pollen:Micro-Fit_43650-0310_Horizontal | J3, J4 |
| 2 | MountingHole_Pad | MountingHole:MountingHole_2.7mm_M2.5_ISO14580_Pad_TopBottom | H1, H2 |
| 2 | Red | LED_SMD:LED_0603_1608Metric | D5, D6 |
| 2 | SlimStack Plug 4mm | Library_Pollen:Molex_SlimStack_539160208 | J2, J6 |
| 2 | TMC6100-LA | Library_Pollen:QFN37_7X7_TRI | U1, U7 |
| 1 | 10n 6V3 | Capacitor_SMD:C_0402_1005Metric | C38 |
| 1 | 10u 35V | Library_Pollen:CP_Elec_6.3x7.7 | C10 |
| 1 | 150R | Resistor_SMD:R_0402_1005Metric | R26 |
| 1 | 75k | Resistor_SMD:R_0402_1005Metric | R23 |
| 1 | AP63203 | Package_TO_SOT_SMD:TSOT-23-6 | U2 |
| 1 | AP63205 | Package_TO_SOT_SMD:TSOT-23-6 | U3 |
| 1 | BAT30KFILM | Diode_SMD:D_SOD-523 | D7 |
| 1 | DNP - TestPoint_Alt | TestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | TP6 |
| 1 | DNP Logo Pollen 2021 | Library_Pollen:Logo_Pollen_2021_sq | H5 |
| 1 | MicroFit2 | Library_Pollen:Micro-Fit_43650-0210_Horizontal | J1 |
| 1 | XT30 | Library_Pollen:AMASS_XT30PW-M_1x02_P2.50mm_Horizontal | J5 |

pollen-robotics/elec_Ventouse_3d
Power board for 3 BLDC motors. Paired with elec_Poulpe_3d


pollen-robotics/elec_battery_mngt
Differents PCB for battery management

EPFLXplore/Power_HW
KiCad design files for the power boards of the Xplore rover.




It measures 50 × 65 mm and has 4 copper layers, 1.6 mm thick.
131 parts, built around the TMC6100-LA, AP63203WU, AP63205WU and BSZ034N04LS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the pollen-robotics/elec_Ventouse_2d repository on GitHub, at the commit this page was made from: the board is elec_Ventouse_2d.kicad_pcb and its schematic driver_A.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).