2 layers49 × 49 mm
2 layers101 × 101.5 mm
Sensor panels
pluyckx/SensorPcbA repository for the Kicad project of the sensor pcb
- Size
- 101 × 101.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 316
- Nets
- 50
- Pads
- 872
- Tracks, vias
- 2,112, 216
- Pours
- 32
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 27 Mar 2016
- Updated
- 18 Apr 2017
Overview
Sensor panels is an open-source printed circuit board by pluyckx, from the pluyckx/SensorPcb repository on GitHub. It is a 2-layer board of 101 × 101.5 mm with 316 parts on 50 nets, routed with 2,112 tracks and 216 vias.
It is built around the STM32L051K8T6, HTU21D and TPS61222DCK, with the TPS79718DCK and AO3401 among its other parts. Its parts include 80 capacitors, 80 resistors, 28 ICs, 16 transistors and 12 connectors. It belongs with the sensors and measurement boards and the STM32 boards of this library.
Main components
5
STM32L051K8T6
LQFP-32(7x7)-40℃~+85℃ 1.65V~3.6V 12bit 27 2KB 32 Bit 32MHz 64KB 8KB ARM Cortex-M0+ Built-in FLASH LQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
HTU21D
DFN-6-EP(3x3)-40℃~+125℃ 0%RH~100%RH 1.5V~3.6V 450uA 8bit、12bit、14bit Factory calibration、Built-in temperature and humidity compensation、Built-in heater、Derived quantity calculation I2C ±0.3℃ ±2%RH DFN-6-EP(3x3) Temperature and Humidity Sensor ROHSTE ConnectivityTemperature And Humidity Sensor
TPS61222DCK
SC-70-6(SOT-363)-40℃~+125℃@(TJ) 1 200mA 5V 700mV~5.5V Boost Boost Built-in Fixed Yes SC-70-6(SOT-363) DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
TPS79718DCK
SC-70-5-40℃~+85℃@(Tj) 1 1.2uA 1.8V 5.5V 50dB@(100Hz) 50mA 600uVrms Fixed PG Pin、Over Current Protection Positive SC-70-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
AO3401
SOT-231 P-Channel 1.3V 115pF 30V 350mW 4.2A 75mΩ@4.5V 77pF 954pF P-Channel SOT-23 MOSFETs ROHSGuangdong HottechMOSFETs
Parts
316| Qty | Value | Footprint | References |
|---|---|---|---|
| 40 | 100nF | Resistors_SMD:R_0805 | C10, C10, C10, C10, C13, C13, C13, C13, C14, C14, C14, C14, C16, C16, C16, C16 +24 |
| 28 | 10k | Resistors_SMD:R_0603 | R1, R1, R1, R1, R2, R2, R2, R2, R18, R18, R18, R18, R19, R19, R19, R19 +12 |
| 24 | 10uF | Resistors_SMD:R_0805 | C1, C1, C1, C1, C11, C11, C11, C11, C12, C12, C12, C12, C15, C15, C15, C15 +8 |
| 24 | 1M | Resistors_SMD:R_0603 | R10, R10, R10, R10, R11, R11, R11, R11, R12, R12, R12, R12, R15, R15, R15, R15 +8 |
| 12 | 100k | Resistors_SMD:R_0603 | R6, R6, R6, R6, R14, R14, R14, R14, R20, R20, R20, R20 |
| 8 | 1uF | Resistors_SMD:R_0805 | C2, C2, C2, C2, C8, C8, C8, C8 |
| 8 | NMosfetGen | CustomSmd:SOT23 | Q2, Q2, Q2, Q2, Q3, Q3, Q3, Q3 |
| 8 | SW_PUSH | CustomSmd:MicroSwitch_6x6mm | SW1, SW1, SW1, SW1, SW2, SW2, SW2, SW2 |
| 4 | 0.1uF | Resistors_SMD:R_0805 | C17, C17, C17, C17 |
| 4 | 0.47uF | Resistors_SMD:R_0805 | C18, C18, C18, C18 |
| 4 | 1.6M | Resistors_SMD:R_0603 | R17, R17, R17, R17 |
| 4 | 3600 | Resistors_SMD:R_0603 | R5, R5, R5, R5 |
| 4 | 475 | Resistors_SMD:R_0603 | R4, R4, R4, R4 |
| 4 | 47k | Resistors_SMD:R_0603 | R13, R13, R13, R13 |
| 4 | AO3401 | CustomSmd:SOT23 | Q1, Q1, Q1, Q1 |
| 4 | CONN_01X02 | ConnWago:ConnWago_2059_2P_SMD | P3, P3, P3, P3 |
| 4 | CONN_02X04 | PinHeaders:Pin_Header_Straight_2x04_TH | P2, P2, P2, P2 |
| 4 | CONN_02X04 | PinHeaders:Pin_Header_Straight_2x04_SMD | P1, P1, P1, P1 |
| 4 | EPL3015 | CustomInductors:EPL3015 | U5, U5, U5, U5 |
| 4 | HTU21D | CustomSmd:HTU21D_QFN | U2, U2, U2, U2 |
| 4 | LED | Resistors_SMD:R_1206 | D1, D1, D1, D1 |
| 4 | MCP60x4 | CustomSmd:SOIC-14 | U1, U1, U1, U1 |
| 4 | PIR | CustomModules:PIR | U3, U3, U3, U3 |
| 4 | PhotoDiode | CustomModules:PD638C | D2, D2, D2, D2 |
| 4 | Q_NMOS_GSD | CustomSmd:SOT23 | Q4, Q4, Q4, Q4 |
| 4 | STM32L051K8T6 | STM32:STM32L051-LQFP32 | IC1, IC1, IC1, IC1 |
| 4 | TPS61222 | DC_DC_Converters:TPS6122x | U6, U6, U6, U6 |
| 4 | TPS79718 | CustomSmd:SC70 | U4, U4, U4, U4 |
The 232 most common of 316 parts.
More from pluyckx/SensorPcb
1Similar boards
- 2 layers50 × 35 mm
- 2 layers54.6 × 14 mm
- 4 layers60.7 × 27.2 mm
- 4 layers66.1 × 66.5 mm
Light Doorbell KiCad
Estylos/Light-Doorbell-HW
KiCad project for a custom, battery-powered doorbell with dual-color LED feedback and 4-layer circular PCB design. Optimized for low power and compact integration
87 parts1MIT - 2 layers85.6 × 54 mm
Wallet dmm
ArgonautGit/wallet_dmm
A multimeter the size of a credit card: DC volts, resistance, continuity and diode test, shown on a 0.91" OLED, with three buttons, an RGB LED and a piezo beeper.
70 parts - 2 layers93 × 42 mm
ADEM
timelab/ADEM
Mobile device for distributed measurements of particulate matter (fine dust)
29 parts13LGPL-3.0 - 2 layers70 × 40 mm
MoreE u blox E PEAS
ldab/Node-RED-Energy-Harvesting-dashboard
Node-RED Energy Harvesting dashboard example, weather forecast, temperature and humidty measurement. MQTT, ESP32, u-blox NINA-W10, HTU21D, IBM Cloud, CloudMQTT
43 parts11MIT - 2 layers50 × 100 mm
OpenWeatherStation MainBoard
VitalSeptfonds/OpenWeatherStation
Open Wheather Station based on STM32
111 parts2MIT
Questions
How big is the Sensor panels PCB?
It measures 101 × 101.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Sensor panels use?
316 parts, built around the STM32L051K8T6, HTU21D, TPS61222DCK and TPS79718DCK. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sensor panels KiCad files?
From the pluyckx/SensorPcb repository on GitHub, at the commit this page was made from: the board is Sensor_panels.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sensor panels design in my own project?
Its repository states no licence, so its author keeps all rights: ask pluyckx before reusing the design.